Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Additional Conferences (Device Packaging HiTEC HiTEN & CICMT)

Preserving Nb Superconducvity in Thin Film Flexible Structures

Vaibhav Gupta, John A. Sellers, Charles Drummond Ellis, Simin Zou, George A. Hernandez, Rujun Bai, Yang Cao, David B. Tuckerman, Michael C. Hamilton

Published Jan 1, 2016• 5 citations
Publisher

Abstract

Similar to observations from other groups, we have observed degradation of the superconducting properties of Nb thin films that have been subjected to subsequent high temperature fabrication processes, such as curing of a passivating polyimide layer at 350°C. This degradation may be caused by interaction with material that diffuses into the Nb during the subsequent processes, and is the subject of ongoing research. To counteract these degradation effects, we have explored multiple materials as barrier layers to attempt to isolate and protect the Nb. The effectiveness of the barrier layer depends on the use of an appropriate layer stack that minimizes degradation in the superconducting thin film, is compatible with subsequent fabrication steps, and is stable and repeatable. We have investigated multiple material stack-ups to protect Nb-based superconducting thin film in flexible structures. We show that curing polymers above a certain temperature on top of a Nb layer can adversely affect the superconducting properties including critical transition temperature (Tc) and critical current (Ic). DC electrical characterization of patterned film test structures were carried out using a closed-cycle cryostat to determine Tc and Ic for the samples. Details of the fabrication processes, experimental procedures and performance results will be presented. Results of these experiments are expected to provide insight into possible materials stack-ups for packaging and interconnect structures for future cryogenic electronics systems.

DOI
10.4071/2016dpc-tha32

Related papers

Thin-Film Nb/Polyimide Superconducting Stripline Flexible Cables

Vaibhav Gupta, Bhargav Yelamanchili, Simin Zou +4 more

We present recent work on design, fabrication, and characterization of thin-film, flexible superconducting stripline cables. Fabrication details, dc, and microwave performance (up to 14 GHz) of cables with Al/Nb/Al conductors and polyimide (PI) dielectric are discussed. Thin Al was used as a barrier layer between Nb and polyimide to protect the Nb superconductivity during subsequent PI curing steps, which were performed at a reduced temperature. The dc performance, including critical transition temperature and critical current, of the stripline transmission lines is presented. We observed Tcvalues of ~8.8 and ~8.6 K for signal traces and ground planes, respectively. Microwave characterization, including cross-talk, was performed on stripline transmission lines and resonators. We observed reasonable impedance match (S11better than -15 dB), low insertion loss (S21better than 0.04 dB/cm) and cross-talk below -60 dB for stripline transmission lines measured up to 10 GHz at 4.2 K. Furthermore, similarly fabricated stripline resonators exhibited quality factors ~7 000 at 10 GHz and 1.2 K for stripline resonators. The results of these experiments provide insight into material stack-ups for robust, multi-layer superconducting flexible cables that can find use in future cryogenic electronics systems.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•20 citations

Microwave Loss Measurements of Copper-Clad Superconducting Niobium Microstrip Resonators on Flexible Polyimide Substrates

Rujun Bai, George A. Hernandez, Yang Cao +4 more

In this work, we investigated how different under- and capping layers on patterned Nb films impacted the RF losses of flexible thin-film superconducting microstrip transmission line resonators measured in a frequency range from 2 to 20 GHz. We studied how different thicknesses of Ti(10 and 50 nm) under-layer, used for adhesion, impacts conductor losses. We also studied Cu(20, 50, 100, and 200 nm) capping layers and how they affect conductor loss. These studies were carried out on 20-μm-thick spin-on polyimide (PI-2611) thin films and characterized at various cryogenic temperatures between 1.2 and 4.2 K. The results indicate normal-superconductor (Ti/Nb) and superconductor-normal (Nb/Cu) bilayer structures have increased surface resistance, which leads to an increase in microwave loss when compared to Nb-only signal traces. We quantified this additional loss by extracting resonator quality factors for weakly coupled resonators with various conductor stack-ups. Our experimental results can help inform decisions regarding material stack-ups when designing multiconductor multilayer superconducting flexible cables intended for use with ultralow-temperature electronic systems.

IEEE Transactions on Applied Superconductivity•Nov 30, 2016•4 citations

Dielectric Encapsulated Niobium Films to Achieve Higher Processing Temperatures

Kirsten L. Lina, Anna E. Fox, Paul D. Dresselhaus

To avoid degradation of circuit performance, fabrication processes for niobium-based superconductive electronics are typically limited to temperatures below 150°C. In this study, we investigated protective dielectric capping layers that preserve the superconducting properties of Niobium (Nb) wiring at processing temperatures as high as 400°C. To assess the thermal stability of Nb films, 400 nm thick Nb layers were deposited on oxidized silicon wafers and were either left uncapped or were intentionally capped with selected dielectric materials. The samples were subjected to post-deposition annealing in an argon atmosphere for comparison. Samples were annealed up to 450°C, and changes in room temperature sheet resistance were used as a proxy for film degradation and checked with cryogenic measurements of samples annealed up to 400°C. A sharp increase in room temperature sheet resistance, and a resulting decrease in residual resistivity ratio was observed in pristine Nb films above 300°C. We found that theex-situdeposition of insulating covering (“cap”) reduces the onset of degradation. Notably, silicon oxide (SiO$\_{x}$) capping shows significant improvement and silicon nitride (Si$\_{x}$N$\_{y}$) capped samples exhibit minimal changes in resistance across the full annealing range. These results suggest that Si$\_{x}$N$\_{y}$encapsulation as a dielectric “cap” preserves superconductive properties and offers an expanded thermal budget for Nb-based superconductive electronics, with implications for multilayer integration and scalable fabrication.

IEEE Transactions on Applied Superconductivity•May 7, 2026•0 citations

TOF-SIMS analysis of decoherence sources in superconducting qubits

Akshay A. Murthy, Jaeyel Lee, Cameron Kopas +6 more

Superconducting qubits have emerged as a potentially foundational platform technology for addressing complex computational problems deemed intractable with classical computing. Despite recent advances enabling multiqubit designs that exhibit coherence lifetimes on the order of hundreds of μs, material quality and interfacial structures continue to curb device performance. Two-level system defects in the thin superconducting film and adjacent dielectric regions introduce stochastic noise and dissipate electromagnetic energy at the cryogenic operating temperatures. In this study, we utilize time-of-flight secondary ion mass spectrometry to understand the role specific fabrication procedures play in introducing such dissipation mechanisms in these complex systems. We interrogated Nb thin films and transmon qubit structures fabricated through slight modifications in the processing and vacuum conditions. We find that when the Nb film is sputtered onto the Si substrate, oxide and silicide regions are generated at various interfaces. We also observe that impurity species, such as niobium hydrides and carbides, are incorporated within the niobium layer during the subsequent lithographic patterning steps. The formation of these resistive compounds likely impacts the superconducting properties of the Nb thin film. Additionally, we observe the presence of halogen species distributed throughout the patterned thin films. We conclude by hypothesizing the source of such impurities in these structures in an effort to intelligently fabricate superconducting qubits and extend coherence times moving forward.

arXiv:2108.13539•Applied Physics Letters•Jan 24, 2022•36 citations

Design, Structural Characterization, and Superconducting Behavior of Niobium Thin-Film Microstructures for Ion-Trap Quantum Computers: Toward J–B–T Critical Surface Mapping for Cryogenic 3D SiP Integration

Awais Qadir, Uwe Zschenderlein, Nathanael Jöhrmann +9 more

Superconducting thin-film microstructures are promising for generating local magnetic-field gradients for individual ion addressing in trapped-ion quantum processors while minimizing Joule heating at cryogenic temperatures. In this work, sputtered niobium (Nb) thin films on Si were patterned into coil and meander structures as candidate components for cryogenic 3D microsystem integration. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and electrical resistance at cryogenic temperature. XRD confirms textured bcc Nb with a dominant Nb (110) reflection and an apparent out-of-plane coherence length of ~20 nm. SEM reveals a porous, needle-like nanograin morphology, while Raman spectroscopy indicates a disordered mixed niobium-oxide surface layer. Electrical measurements show clear superconducting transitions, with midpoint critical temperatures of about 7.5 K for the coil and 7.8 K for the meander, both below bulk Nb. The normal-state behavior is characterized by low residual-resistivity ratios (RRR), indicating significant disorder and grain-boundary scattering. Based on the measured Tc values and geometry-derived effective current densities (Jc), a phenomenological J-B-T critical-surface model was constructed to estimate the superconducting operating window under simultaneous temperature and magnetic-field loading. The results establish a process-structure-property correlation for sputtered Nb on Si and provide guidance for integrating superconducting thin-film coils into future trapped-ion cryogenic microsystems.

International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE)•Apr 19, 2026•0 citations

Distinguishing Dielectric Loss From Superconductor Loss Using Flexible Thin-Film Superconducting Resonator Structures

Vaibhav Gupta, Bhargav Yelamanchili, Simin Zou +4 more

Flexible interconnects with superconducting (SC) traces and polyimide dielectric can provide low signal loss and low thermal conductivity at cryogenic temperatures, and are expected to find use in densely integrated cryogenic electronics systems. The ultra-low loss of SC interconnects at microwave frequencies can be accurately characterized through the use of weakly coupled SC resonators. The high-quality factor resonators provide sensitive measurements of the aggregate loss properties of the conductor and dielectric, as functions of frequency, temperature, and signal power. In this work, resonators with different linewidths were fabricated and tested to study how the linewidth impacts the overall internal resonator loss, in order to better characterize and separate the individual loss components (i.e., dielectric loss vs. conductor loss). The results of this work are important for understanding loss and transmission properties of similarly designed and fabricated transmission line interconnects.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•5 citations
Similar to observations from other groups, we have observed degradation of the superconducting properties of Nb thin films that have been subjected to subsequent high temperature fabrication processes, such as curing of a passivating polyimide layer at 350°C. This degradation may be caused by interaction with material that diffuses into the Nb during the subsequent processes, and is the subject of ongoing research. To counteract these degradation effects, we have explored multiple materials as barrier layers to attempt to isolate and protect the Nb. The effectiveness of the barrier layer depends on the use of an appropriate layer stack that minimizes degradation in the superconducting thin film, is compatible with subsequent fabrication steps, and is stable and repeatable. We have investigated multiple material stack-ups to protect Nb-based superconducting thin film in flexible structures. We show that curing polymers above a certain temperature on top of a Nb layer can adversely affect the superconducting properties including critical transition temperature (Tc) and critical current (Ic). DC electrical characterization of patterned film test structures were carried out using a closed-cycle cryostat to determine Tc and Ic for the samples. Details of the fabrication processes, experimental procedures and performance results will be presented. Results of these experiments are expected to provide insight into possible materials stack-ups for packaging and interconnect structures for future cryogenic electronics systems.
We present recent work on design, fabrication, and characterization of thin-film, flexible superconducting stripline cables. Fabrication details, dc, and microwave performance (up to 14 GHz) of cables with Al/Nb/Al conductors and polyimide (PI) dielectric are discussed. Thin Al was used as a barrier layer between Nb and polyimide to protect the Nb superconductivity during subsequent PI curing steps, which were performed at a reduced temperature. The dc performance, including critical transition temperature and critical current, of the stripline transmission lines is presented. We observed Tcvalues of ~8.8 and ~8.6 K for signal traces and ground planes, respectively. Microwave characterization, including cross-talk, was performed on stripline transmission lines and resonators. We observed reasonable impedance match (S11better than -15 dB), low insertion loss (S21better than 0.04 dB/cm) and cross-talk below -60 dB for stripline transmission lines measured up to 10 GHz at 4.2 K. Furthermore, similarly fabricated stripline resonators exhibited quality factors ~7 000 at 10 GHz and 1.2 K for stripline resonators. The results of these experiments provide insight into material stack-ups for robust, multi-layer superconducting flexible cables that can find use in future cryogenic electronics systems.
In this work, we investigated how different under- and capping layers on patterned Nb films impacted the RF losses of flexible thin-film superconducting microstrip transmission line resonators measured in a frequency range from 2 to 20 GHz. We studied how different thicknesses of Ti(10 and 50 nm) under-layer, used for adhesion, impacts conductor losses. We also studied Cu(20, 50, 100, and 200 nm) capping layers and how they affect conductor loss. These studies were carried out on 20-μm-thick spin-on polyimide (PI-2611) thin films and characterized at various cryogenic temperatures between 1.2 and 4.2 K. The results indicate normal-superconductor (Ti/Nb) and superconductor-normal (Nb/Cu) bilayer structures have increased surface resistance, which leads to an increase in microwave loss when compared to Nb-only signal traces. We quantified this additional loss by extracting resonator quality factors for weakly coupled resonators with various conductor stack-ups. Our experimental results can help inform decisions regarding material stack-ups when designing multiconductor multilayer superconducting flexible cables intended for use with ultralow-temperature electronic systems.
To avoid degradation of circuit performance, fabrication processes for niobium-based superconductive electronics are typically limited to temperatures below 150°C. In this study, we investigated protective dielectric capping layers that preserve the superconducting properties of Niobium (Nb) wiring at processing temperatures as high as 400°C. To assess the thermal stability of Nb films, 400 nm thick Nb layers were deposited on oxidized silicon wafers and were either left uncapped or were intentionally capped with selected dielectric materials. The samples were subjected to post-deposition annealing in an argon atmosphere for comparison. Samples were annealed up to 450°C, and changes in room temperature sheet resistance were used as a proxy for film degradation and checked with cryogenic measurements of samples annealed up to 400°C. A sharp increase in room temperature sheet resistance, and a resulting decrease in residual resistivity ratio was observed in pristine Nb films above 300°C. We found that theex-situdeposition of insulating covering (“cap”) reduces the onset of degradation. Notably, silicon oxide (SiO_x\_{x}_x) capping shows significant improvement and silicon nitride (Si_x\_{x}_xN_y\_{y}_y) capped samples exhibit minimal changes in resistance across the full annealing range. These results suggest that Si_x\_{x}_xN_y\_{y}_yencapsulation as a dielectric “cap” preserves superconductive properties and offers an expanded thermal budget for Nb-based superconductive electronics, with implications for multilayer integration and scalable fabrication.
Superconducting qubits have emerged as a potentially foundational platform technology for addressing complex computational problems deemed intractable with classical computing. Despite recent advances enabling multiqubit designs that exhibit coherence lifetimes on the order of hundreds of μs, material quality and interfacial structures continue to curb device performance. Two-level system defects in the thin superconducting film and adjacent dielectric regions introduce stochastic noise and dissipate electromagnetic energy at the cryogenic operating temperatures. In this study, we utilize time-of-flight secondary ion mass spectrometry to understand the role specific fabrication procedures play in introducing such dissipation mechanisms in these complex systems. We interrogated Nb thin films and transmon qubit structures fabricated through slight modifications in the processing and vacuum conditions. We find that when the Nb film is sputtered onto the Si substrate, oxide and silicide regions are generated at various interfaces. We also observe that impurity species, such as niobium hydrides and carbides, are incorporated within the niobium layer during the subsequent lithographic patterning steps. The formation of these resistive compounds likely impacts the superconducting properties of the Nb thin film. Additionally, we observe the presence of halogen species distributed throughout the patterned thin films. We conclude by hypothesizing the source of such impurities in these structures in an effort to intelligently fabricate superconducting qubits and extend coherence times moving forward.
Superconducting thin-film microstructures are promising for generating local magnetic-field gradients for individual ion addressing in trapped-ion quantum processors while minimizing Joule heating at cryogenic temperatures. In this work, sputtered niobium (Nb) thin films on Si were patterned into coil and meander structures as candidate components for cryogenic 3D microsystem integration. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, and electrical resistance at cryogenic temperature. XRD confirms textured bcc Nb with a dominant Nb (110) reflection and an apparent out-of-plane coherence length of ~20 nm. SEM reveals a porous, needle-like nanograin morphology, while Raman spectroscopy indicates a disordered mixed niobium-oxide surface layer. Electrical measurements show clear superconducting transitions, with midpoint critical temperatures of about 7.5 K for the coil and 7.8 K for the meander, both below bulk Nb. The normal-state behavior is characterized by low residual-resistivity ratios (RRR), indicating significant disorder and grain-boundary scattering. Based on the measured Tc values and geometry-derived effective current densities (Jc), a phenomenological J-B-T critical-surface model was constructed to estimate the superconducting operating window under simultaneous temperature and magnetic-field loading. The results establish a process-structure-property correlation for sputtered Nb on Si and provide guidance for integrating superconducting thin-film coils into future trapped-ion cryogenic microsystems.
Flexible interconnects with superconducting (SC) traces and polyimide dielectric can provide low signal loss and low thermal conductivity at cryogenic temperatures, and are expected to find use in densely integrated cryogenic electronics systems. The ultra-low loss of SC interconnects at microwave frequencies can be accurately characterized through the use of weakly coupled SC resonators. The high-quality factor resonators provide sensitive measurements of the aggregate loss properties of the conductor and dielectric, as functions of frequency, temperature, and signal power. In this work, resonators with different linewidths were fabricated and tested to study how the linewidth impacts the overall internal resonator loss, in order to better characterize and separate the individual loss components (i.e., dielectric loss vs. conductor loss). The results of this work are important for understanding loss and transmission properties of similarly designed and fabricated transmission line interconnects.