We demonstrate, for the first time, that a quantum flux parametron (QFP) is capable of acting as both isolator and amplifier in the readout circuit of a capacitively shunted flux qubit (CSFQ).By treating the QFP like a tunable coupler and biasing it such that the coupling is off, we show that T 1 of the CSFQ is not impacted by Purcell loss from its low-Q readout resonator (Q e = 760) despite being detuned by only 40 MHz.When annealed, the QFP amplifies the qubit's persistent current signal such that it generates a flux qubit-state-dependent frequency shift of 85 MHz in the readout resonator, which is over 9 times its linewidth.The device is shown to read out a flux qubit in the persistent current basis with fidelities surpassing 98.6% with only 80 ns integration, and reaches fidelities of 99.6% when integrated for 1 μs.This combination of speed and isolation is critical to the readout of high-coherence quantum annealers.
Currently, superconducting qubit processors are bottlenecked by errors during two-qubit gates, readout, and idle time. All three error contributions could be reduced if we improved the speed of operations (without introducing additional leakage errors) compared to the qubit lifetime. Readout and two-qubit gates are multimode interactions and therefore are limited by the coupling strength between the modes. In this thesis, we introduce a two-mode superconducting qubit which uses one mode to facilitate strong coupling to other modes of the quantum processor and one mode to store data with high coherence. Simulations show that this architecture could enable order-of-magnitude reductions in error during readout and two-qubit gates.
High-fidelity and rapid qubit readout is essential for superconducting quantum processors, typically realized through the quantum non-demolition (QND) dispersive interaction within a qubit-resonator architecture. However, the achievable readout speed and fidelity are fundamentally limited by measurement-induced state transitions (MIST). For a transmon qubit, MIST is highly sensitive to the offset charge
ng due to the charge dispersion of its higher-lying energy levels. In this work, we systematically investigate
ng-dependent MIST dynamics governed by the diabaticity and symmetry of pulse shaping within a charge-sensitive transmon architecture. We engineer fast-load and fast-clear pulses that effectively suppress resonator photon overshoots, thereby demonstrating a highly practical strategy to mitigate MIST without requiring complex waveforms or real-time feedback. Utilizing active gate-voltage control and rapid feedback, the measurement-induced transition probability is precisely mapped against
ng and the steady-state resonator photon number, exhibiting strong agreement with numerical Floquet branch analysis. Ultimately, we evaluate the
ng-averaged total error probabilities for both readout and post-readout stages, verifying that a straightforward three-step pulse scheme consistently minimizes overall readout errors. Within the framework of large-scale superconducting quantum processors, this practical, hardware-free approach inherently offers a better trade-off between the readout signal-to-noise ratio and QND preservation.