In this paper, the author describes studies on electronic devices and circuits utilizing both of superconductors and semniconductors. First, a design of an interface circuit composed of Josephson junctions and MOSFETs is described. The Josephson-MOS interface circuit will be used for realizing high-speed data communication between a Josephson digital circuit and a semiconductor one. Second, fabrication and characterization of MOSFETs with superconductive NbN gate electrodes are described. The use of superconductive gates makes it easy to hybridize MOSFETs with Josephson junctions. Finally, studies of Josephson-CMOS hybrid memory circuits are introduced.
In this paper, the author describes studies on electronic devices and circuits utilizing both of superconductors and semniconductors. First, a design of an interface circuit composed of Josephson junctions and MOSFETs is described. The Josephson-MOS interface circuit will be used for realizing high-speed data communication between a Josephson digital circuit and a semiconductor one. Second, fabrication and characterization of MOSFETs with superconductive NbN gate electrodes are described. The use of superconductive gates makes it easy to hybridize MOSFETs with Josephson junctions. Finally, studies of Josephson-CMOS hybrid memory circuits are introduced.
The authors describe the development of circuit models, applications of superconducting field effect transistors (SFETs), and higher-voltage Josephson junction (HVJJ) circuits which are important for the feasibility of several novel hybrid superconducting-semiconducting circuits. They also discuss the delay optimization involved in designing and embedding interface circuits in a hybrid superconductor-semiconductor technology. It is noted that, with the advances made in semiconductor technologies, interfaces between the two technologies are practical now and the advantages of hybrid circuits in various applications should be realizable in practice. In the case of interfacing typical Nb-based Josephson junction circuits to 0.5 mu m CMOS technologies, it was estimated that the minimum delay through the interface is approximately 110 ps and the optimum number of junctions in each branch of the HVJJ circuits is 10.>
Superconducting logic circuits based on Josephson junctions (JJ) are the fastest, lowest power solid state digital circuit technology known. Large scale integration of such circuits has also been demonstrated. By contrast, current superconducting memory circuits based on flux quantization are not equivalently advanced. Very dense memory chips have not been possible to date and seem unlikely to come without new invention. The goal of this project was to explore alternative approaches to memory that would be compatible with Josephson junction logic circuits and capable of much denser memory arrays. Five new approaches were investigated ranging from modification to the current approach, use of semiconductor CMOS and wholly new concepts based on new physical principles. Three of these were identified as worth pursuing. They are use of cooled CMOS, use of cryogenic hybrid JJ/CMOS memory concepts and a totally new magnetoresistive approach to memory based on the superconductor/ferromagnet proximity effect.
For broadband data communication between Josephson and CMOS digital systems, amplification of small Josephson-output signals and synchronization between the systems are important issues. We present an interface circuit for a Josephson-CMOS hybrid digital system. The interface circuit consists of a parallel-in-parallel-out (PIPO) circuit and built-in Josephson-MOS amplifiers. The PIPO circuit, implemented based on 4JL latching logic technology, performs synchronized data transfer between the Josephson and CMOS circuits. The Josephson-MOS amplifiers consists of stacked Josephson junctions (Suzuki stacks) and MOS inverters which are monolithically integrated on a chip. The circuits have been designed, fabricated and tested. We have successfully confirmed correct operation of the circuits.
The authors review the current status of silicon microprocessors and memories, and briefly contrast this with the current status of superconducting processors and memories. Possible applications for conventional Josephson computers are mentioned, and the difficulties in supplanting silicon technology by any new technology are discussed. An alternate strategy of hybridizing superconductor and semiconductor circuits is proposed. These hybrid circuits will be able to outperform either technology separately. The hybrid circuits combine the virtues of semiconductor circuits which have high density and excellent manufacturability with the virtues of superconductor circuits which are extremely sensitive in detecting currents and have the capability to drive currents in low impedance lines. The authors examine how hybrid circuits can improve two deficiencies of conventional silicon technology, high power dissipation in interconnection circuits and long memory access times, without requiring the use of many superconductive devices.>
Superconductive electronics offers a unique combination of high bandwidth and low power for mission critical hardware such as digital processors at 20 to 100 GHz, microwatt per bit analog to digital converters, large digital switches at multi-Gb/s data rates, and low noise parametric amplifiers. This cryogenic technology, typically operating at a few degrees or a few tens of degrees Kelvin, depends upon the unique physics of superconducting materials such as Nb, NbN, and YBaCuO, and the fundamental circuit element, the Josephson junction (JJ) to create unique architectures of unprecedented design efficiency and performance. These circuits are based on the single flux quantum (SFQ) logic family, a technology that has no parallel in semiconductor electronics. Digital data is transmitted by voltage pulses with amplitude less than 1 mV, but at extremely high speeds. Individual gates have been operated as high as 370 GHz. In this paper, we present a brief overview of superconductive digital technology, describe some recent circuits, and discuss how the challenges to superconductive technology are being met, including the use of multi-chip module (MCM) technology, and the potential use of III-V HBT and HEMT circuits to provide interface drivers and amplifiers, possibly operated cryogenically.
Interface circuits are the key components that enable the hybrid integration of superconductor and semiconductor digital electronics. The design requirements of superconductor-semiconductor interface circuits vary depending on the application, such as high-performance classical computing, superconducting quantum computing, and digital signal processing. In this survey, various interface circuits are categorized based on the working principle and structure. The superconducting output drivers are explored, which are capable of converting and amplifying, e.g., single flux quantum (SFQ) voltage pulses, to voltage levels that semiconductor circuits can process. Several trade-offs between circuit- and system-level design parameters are examined. Accordingly, parameters such as the data rate, output voltage, power dissipation, layout area, thermal/heat load of cryogenic cables, and bit-error rate are considered.