Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics and Precision Engineering

ATP technology for 100-kilometer quantum entanglement distribution experiment

亓波 Qi Bo, 陈洪斌 Chen Hongbin, 任戈 Ren Ge, 黄永梅 Huang Yongmei, 丁科 Ding Ke, 马佳光 Ma Jia-guang

Published Jan 1, 2013• 2 citations
Publisher

Abstract

Acquiring,tracking and pointing(ATP) technique in a 100 km quantum entanglement distribution experiment was introduced in detail.By taking a 700 mm telescope at Alice receiving terminal as an example,the technological specification,light path layout,and tracking accuracy of the ATP system were analyzed.In order to reduce the angle-of-arrival fluctuations of quantum information transmission beams and beacon beams caused by air turbulence,a cascade acquisition and tracking system with coarse tracking,fine tracking and a ultra-fine loop was designed and a dual fast-steering mirror tracking algorithm was proposed.On the basis of a higher frame frequency CMOS detector and a piezoelectric fast-steering mirror,the ultra-fine tracking circuit was developed.Experiments show that these methods solve the contradiction between tracking dynamic range and tracking accuracy,promote the performance of the detector and improve band width and tracking accuracy.The system was used in a ground 100 km quantum entanglement distribution experiment and the results indicate that the tracking error of the system is 4 μrad for a 70 Hz bandwidth.

DOI
10.3788/ope.20132106.1628

Related papers

Acquisition and tracking system for 100km quantum entanglement distribution experiment

Bo Qi, Hongbin Chen, Ge Ren +3 more

Quantum entanglement is the main resource to endow the field of quantum information processing with powers that exceed those of classical communication and computation. Due to low absorption and negligible nonbirefringent character in atmosphere, optical free space therefore serves as the most promising channel for large-scale quantum communication by use of satellites and ground stations. The acquisition, tracking and pointing (ATP) system is one of the most important parts of quantum experiment system, and it controls a transmitting and receiving laser beam within a few micro radians jitter because of using an extremely narrow beam divergence of several micro radians. This paper introduces the cascade ATP systems for 100km quantum entanglement distribution experiment among Charlie, Bob and Alice station. The specification and optical diagram of each ATP system are presented. The ATP system of Alice station is described in detail,it has coarse, fine and ultra-fine loop. In the 100km quantum entanglement distribution experiment, a tracking error of 4μrad is achieved for 70Hz bandwidth. The ATP strategy in this experiment can be used in the prospective satellite-to-ground quantum distribution.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 21, 2013•6 citations

A method for optical ground station reduce alignment error in satellite-ground quantum experiments

Dong He, Qiang Wang, Jian-Wei Zhou +5 more

A satellite dedicated for quantum science experiments, has been developed and successfully launched from Jiuquan, China, on August 16, 2016. Two new optical ground stations (OGSs) were built to cooperate with the satellite to complete satellite-ground quantum experiments. OGS corrected its pointing direction by satellite trajectory error to coarse tracking system and uplink beacon sight, therefore fine tracking CCD and uplink beacon optical axis alignment accuracy was to ensure that beacon could cover the quantum satellite in all time when it passed the OGSs. Unfortunately, when we tested specifications of the OGSs, due to the coarse tracking optical system was commercial telescopes, the change of position of the target in the coarse CCD was up to 600μrad along with the change of elevation angle. In this paper, a method of reduce alignment error between beacon beam and fine tracking CCD is proposed. Firstly, OGS fitted the curve of target positions in coarse CCD along with the change of elevation angle. Secondly, OGS fitted the curve of hexapod secondary mirror positions along with the change of elevation angle. Thirdly, when tracking satellite, the fine tracking error unloaded on the real-time zero point position of coarse CCD which computed by the firstly calibration data. Simultaneously the positions of the hexapod secondary mirror were adjusted by the secondly calibration data. Finally the experiment result is proposed. Results show that the alignment error is less than 50μrad.

Young Scientists Forum 2017•Mar 5, 2018•1 citation

Optimization of Optical Design and Pointing Error Constraints for Low-Orbit Satellite Based Entanglement Quantum Key Distribution

Elif Türkan Akşit Kaya, Mustafa Doğan, Kadir Durak +1 more

Quantum Key Distribution (QKD) offers theoretically unconditional security for modern communication networks, guaranteeing the confidentiality and privacy of secure communication. Yet terrestrial fiber-optic implementations are severely limited by exponential optical attenuation over long distances. Satellite-based systems in Low Earth Orbit (LEO) provide a viable solution by propagating quantum states through the vacuum of space. However, the viability of these systems relies heavily on mitigating geometric beam divergence and maintaining ultra-precise beam pointing. This paper presents an optimized optical design solution for a 500 km LEO micro-satellite utilizing a 190 mm transmitter and a 750 mm ground receiver telescopes. We extensively analyze the impact of pointing error (jitter) on the optical link budget. Dynamic pass simulations reveal that pointing errors exceeding 5 μrad drastically degrade the Sifted Key Rate (SKR) and exponentially increase the Quantum Bit Error Rate (QBER), severely narrowing the secure communication time window. Our findings underscore the necessity of stringent Acquisition, Tracking, and Pointing (ATP) mechanisms to sustain QBER below the 11% security threshold.

International Conference on Recent Advances in Space Technologies•May 1, 2026•0 citations

The design and research of coarse tracking system for space quantum communication

Qiang Jia

A design of a coarse tracking system for quantum communication is proposed.The DSP is used as the main controller,the CMOS detector is used for measuring the beacon light,the resolver and the PMSM motor is used as the servomechansim.Multi-loop feedback method is used for controlling the coarse tracking system.With the satellite simulation experiment and floating motion platform experiment,the performance of the coarse tracking system is tested.

Optical Communication Technology•Jan 1, 2012•1 citation

Research on high-bandwidth technology for quantum communication ATP system

Jianjun Jia

A design of a high-bandwidth ATP camera is proposed, and the high-bandwidth ATP camera is de- signed and implemented. Simulation analysis and experimental test results show that: with the ATP camera, the ATP system has a interference rejection bandwidth of about 200Hz and an accuracy of 1μrad undergiven conditions, meeting the needs of quantum communication between satellite and the ground.

Optical Communication Technology•Jan 1, 2010•1 citation

Enabling daylight free-space quantum communication through beam stabilization techniques

Jorge Gómez-García, Alejandro Ocampos-Guillén, Natalia Denisenko +1 more

Daylight performance of open-air quantum communications is hindered by background light coupling into single-photon detectors. Since most detectors tend to have small active areas (20-200 microns) beam deviations caused by atmospheric turbulence induce losses in the quantum signal. Therefore, the receiver’s field of view needs to be left sufficiently large to avoid these losses, which in turn increases the background noise in the system and thus the quantum bit error rate contribution caused by background noise (QBERbackg). Active compensation techniques stabilize the beam in a pre-aligned position, allowing a reduction of the field of view. These techniques use fast steering mirrors (FSMs) and position sensitive detectors (PSDs) in a feedback loop to compensate for these deviations and maintain the quantum signal aligned within the receiver field of view even in the presence of fast turbulence (up to 200 Hz). Using a single FSM correcting system stabilizes the beam in the receiver in a single plane, whereas a double FSM system (see Fig. 1) corrects all beam deviations throughout the whole optical axis. A double correcting system was tested in a free-space 30-metre link and beam deviations were reduced an average factor of 3 (in diameter) and a maximum factor of 5 (see Fig. 2), which corresponds to a decrease in area of 89% and 96.4%, respectively, meaning that background noise is reduced in the same amount. The Fourier transform of the deviations were characterized to evaluate the dependence of the correction with the frequency components of the turbulence, establishing that a good correction was achieved up to 200-250 Hz (see Fig. 3), which corresponds to the bandwidth of beam wander. Frequencies beyond this range correspond to higher degree waveform distortions (like scintillation) which necessitate from other correcting techniques and cannot be corrected with tip-and-tilt compensation, which is our case. The performance of this compensation system was simulated with ray-tracing software up to a distance of 500 metres in very high turbulent regime (Cn2=10-11 m-2/3) confirming a ~90% reduction in QBERbackg is still present.

•Jul 10, 2017•0 citations
Acquiring,tracking and pointing(ATP) technique in a 100 km quantum entanglement distribution experiment was introduced in detail.By taking a 700 mm telescope at Alice receiving terminal as an example,the technological specification,light path layout,and tracking accuracy of the ATP system were analyzed.In order to reduce the angle-of-arrival fluctuations of quantum information transmission beams and beacon beams caused by air turbulence,a cascade acquisition and tracking system with coarse tracking,fine tracking and a ultra-fine loop was designed and a dual fast-steering mirror tracking algorithm was proposed.On the basis of a higher frame frequency CMOS detector and a piezoelectric fast-steering mirror,the ultra-fine tracking circuit was developed.Experiments show that these methods solve the contradiction between tracking dynamic range and tracking accuracy,promote the performance of the detector and improve band width and tracking accuracy.The system was used in a ground 100 km quantum entanglement distribution experiment and the results indicate that the tracking error of the system is 4 μrad for a 70 Hz bandwidth.
Quantum entanglement is the main resource to endow the field of quantum information processing with powers that exceed those of classical communication and computation. Due to low absorption and negligible nonbirefringent character in atmosphere, optical free space therefore serves as the most promising channel for large-scale quantum communication by use of satellites and ground stations. The acquisition, tracking and pointing (ATP) system is one of the most important parts of quantum experiment system, and it controls a transmitting and receiving laser beam within a few micro radians jitter because of using an extremely narrow beam divergence of several micro radians. This paper introduces the cascade ATP systems for 100km quantum entanglement distribution experiment among Charlie, Bob and Alice station. The specification and optical diagram of each ATP system are presented. The ATP system of Alice station is described in detail,it has coarse, fine and ultra-fine loop. In the 100km quantum entanglement distribution experiment, a tracking error of 4μrad is achieved for 70Hz bandwidth. The ATP strategy in this experiment can be used in the prospective satellite-to-ground quantum distribution.
A satellite dedicated for quantum science experiments, has been developed and successfully launched from Jiuquan, China, on August 16, 2016. Two new optical ground stations (OGSs) were built to cooperate with the satellite to complete satellite-ground quantum experiments. OGS corrected its pointing direction by satellite trajectory error to coarse tracking system and uplink beacon sight, therefore fine tracking CCD and uplink beacon optical axis alignment accuracy was to ensure that beacon could cover the quantum satellite in all time when it passed the OGSs. Unfortunately, when we tested specifications of the OGSs, due to the coarse tracking optical system was commercial telescopes, the change of position of the target in the coarse CCD was up to 600μrad along with the change of elevation angle. In this paper, a method of reduce alignment error between beacon beam and fine tracking CCD is proposed. Firstly, OGS fitted the curve of target positions in coarse CCD along with the change of elevation angle. Secondly, OGS fitted the curve of hexapod secondary mirror positions along with the change of elevation angle. Thirdly, when tracking satellite, the fine tracking error unloaded on the real-time zero point position of coarse CCD which computed by the firstly calibration data. Simultaneously the positions of the hexapod secondary mirror were adjusted by the secondly calibration data. Finally the experiment result is proposed. Results show that the alignment error is less than 50μrad.
Quantum Key Distribution (QKD) offers theoretically unconditional security for modern communication networks, guaranteeing the confidentiality and privacy of secure communication. Yet terrestrial fiber-optic implementations are severely limited by exponential optical attenuation over long distances. Satellite-based systems in Low Earth Orbit (LEO) provide a viable solution by propagating quantum states through the vacuum of space. However, the viability of these systems relies heavily on mitigating geometric beam divergence and maintaining ultra-precise beam pointing. This paper presents an optimized optical design solution for a 500 km LEO micro-satellite utilizing a 190 mm transmitter and a 750 mm ground receiver telescopes. We extensively analyze the impact of pointing error (jitter) on the optical link budget. Dynamic pass simulations reveal that pointing errors exceeding 5 μrad drastically degrade the Sifted Key Rate (SKR) and exponentially increase the Quantum Bit Error Rate (QBER), severely narrowing the secure communication time window. Our findings underscore the necessity of stringent Acquisition, Tracking, and Pointing (ATP) mechanisms to sustain QBER below the 11% security threshold.
Daylight performance of open-air quantum communications is hindered by background light coupling into single-photon detectors. Since most detectors tend to have small active areas (20-200 microns) beam deviations caused by atmospheric turbulence induce losses in the quantum signal. Therefore, the receiver’s field of view needs to be left sufficiently large to avoid these losses, which in turn increases the background noise in the system and thus the quantum bit error rate contribution caused by background noise (QBERbackg). Active compensation techniques stabilize the beam in a pre-aligned position, allowing a reduction of the field of view. These techniques use fast steering mirrors (FSMs) and position sensitive detectors (PSDs) in a feedback loop to compensate for these deviations and maintain the quantum signal aligned within the receiver field of view even in the presence of fast turbulence (up to 200 Hz). Using a single FSM correcting system stabilizes the beam in the receiver in a single plane, whereas a double FSM system (see Fig. 1) corrects all beam deviations throughout the whole optical axis. A double correcting system was tested in a free-space 30-metre link and beam deviations were reduced an average factor of 3 (in diameter) and a maximum factor of 5 (see Fig. 2), which corresponds to a decrease in area of 89% and 96.4%, respectively, meaning that background noise is reduced in the same amount. The Fourier transform of the deviations were characterized to evaluate the dependence of the correction with the frequency components of the turbulence, establishing that a good correction was achieved up to 200-250 Hz (see Fig. 3), which corresponds to the bandwidth of beam wander. Frequencies beyond this range correspond to higher degree waveform distortions (like scintillation) which necessitate from other correcting techniques and cannot be corrected with tip-and-tilt compensation, which is our case. The performance of this compensation system was simulated with ray-tracing software up to a distance of 500 metres in very high turbulent regime (Cn2=10-11 m-2/3) confirming a ~90% reduction in QBERbackg is still present.