Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics Conference Series

Optimization of a heralded single-photon source with spatial and temporal multiplexing

Латыпов Ильнур Зиннурович, A. V. Shkalikov, А. А. Калачев

Published May 7, 2015• 5 citations
Publisher

Abstract

The properties of a heralded single-photon source with temporal and spatial multiplexing are studied with the aim to maximize its efficiency for a given value of the second-order zero-time autocorrelation function. We show that the variable time delay, which is used for temporal multiplexing, can be optimized so that the mean number of photon passes through the switches and the total number of switches are respectively reduced to ∼ log 2 N and ∼ (1/2)log 2 N , where N is the temporal multiplexing degree. The total efficiency of such an optimized source is calculated for typical switching losses and the autocorrelation function is calculated in the presence of the detector dark-count noise.

DOI
10.1088/1742-6596/613/1/012009

Related papers

Optimization of multiplexed single-photon sources operated with photon-number-resolving detectors

Ferenc Bódog, Matyas I. Mechler, Mátyás Koniorczyk +1 more

Detectors inherently capable of resolving photon numbers have undergone a significant development recently, and this is expected to affect multiplexed periodic single-photon sources where such detectors can find their applications. We analyze various spatially and time-multiplexed periodic single-photon source arrangements with photon-number-resolving detectors, partly to identify the cases when they outperform those with threshold detectors. We develop a full statistical description of these arrangements in order to optimize such systems with respect to maximal single-photon probability, taking into account all relevant loss mechanisms. The model is suitable for the description of all spatial and time multiplexing schemes. Our detailed analysis of symmetric spatial multiplexing identifies a particular range of loss parameters in which the use of the new type of detectors leads to an improvement. Photon number resolution opens an additional possibility for optimizing the system in that the heralding strategy can be defined in terms of actual detected photon numbers. Our results show that this kind of optimization opens an additional parameter range of improved efficiency. Moreover, this higher efficiency can be achieved by using less multiplexed units, i.e., smaller system size as compared to threshold-detector schemes. We also extend our investigation to certain time-multiplexed schemes of actual experimental relevance. We find that the highest single-photon probability is 0.907 that can be achieved by binary bulk time multiplexers using photon-number-resolving detectors.

arXiv:2003.11275•Physical Review A•Jul 23, 2020•15 citations

Reducing Multiphoton Noise in Multiplexed Single-Photon Sources

Петер Адам, Matyas I. Mechler

Multiplexed single-photon sources can produce indistinguishable single photons with high probability in near-perfect spatial modes. Such systems, realized with optical elements having losses, can be optimized—that is, both the optimal number of multiplexed units in the sources and the optimal mean number of photon pairs generated in a multiplexed unit, for which the output single-photon probability is maximal, can be determined. The accompanying multiphoton noise of the sources, arising from the probabilistic nature of the underlying physical processes in these systems, can be detrimental in certain applications. Inspired by this fact, we develop a procedure aimed at decreasing the multiphoton noise of multiplexed single-photon sources. The procedure is based on the reoptimization of the system for the chosen value of the normalized second-order autocorrelation function characterizing the multiphoton noise. The results of this reoptimization are shown for two types of spatially multiplexed single-photon sources. We find that by applying the proposed procedure, the multiphoton noise can be considerably decreased along with a relatively low decrease in the single-photon probability. Although the method presented here is for two spatially multiplexed single-photon sources, it can be applied straightforwardly for any type of multiplexed single-photon source.

Photonics•Aug 4, 2024•2 citations

Active temporal and spatial multiplexing of photons

Gabriel J. Mendoza, Raffaele Santagati, Jack Munns +7 more

Photonic qubits constitute a leading platform to disruptive quantum technologies due to their unique low-noise properties. The cost of the photonic approach is the non-deterministic nature of many of the processes, including single-photon generation, which arises from parametric sources and negligible interaction between photons. Active temporal multiplexing - repeating a generation process in time and rerouting to single modes using an optical switching network - is a promising approach to overcome this challenge and will likely be essential for large-scale applications with greatly reduced resource complexity and system sizes. Requirements include the precise synchronization of a system of low-loss switches, delay lines, fast photon detectors, and feed-forward. Here we demonstrate temporal multiplexing of 8 'bins' from a double-passed heralded photon source and observe an increase in the heralding and heralded photon rates. This system points the way to harnessing temporal multiplexing in quantum technologies, from single-photon sources to large-scale computation.

arXiv:1503.01215•Optica•Jan 28, 2016•114 citations

An extremely low-noise heralded single-photon source without temporal post-selection

Fabrizio Piacentini, P. Traina, Adriano Della Frera +11 more

With the recent progresses in quantum technologies, single photon sources have gained a primary relevance. Here we present a heralded single photon source characterized by an extremely low level of noise photons, realized by exploiting low-jitter electronics and detectors and fast custom-made electronics used to control an optical shutter (a LiNbO3 waveguide optical switch) at the output of the source. This single photon source showed a second-order autocorrelation function g(2)(0) = 0:005(7), and an Output Noise Factor (defined as the ratio of noise photons to total photons at the source output) of 0:25(1)%, among the best ever achieved.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•May 6, 2013•0 citations

Proposal for low-noise heralded single photons from cascaded downconversion

Patrick F. Poitras, Evan Meyer-Scott, Deny R. Hamel

Heralded single photon sources are often implemented using spontaneous parametric downconversion, but their quality can be restricted by optical loss, double pair emission and detector dark counts. Here, we show that the performance of such sources can be improved using cascaded downconversion, by providing a second trigger signal to herald the presence of a single photon, thereby reducing the effects of detector dark counts. We find that for a setup with fixed detectors, an improved heralded second-order correlation function $g^{(2)}$ can always be achieved with cascaded downconversion given sufficient efficiency for the second downconversion, even for equal single-photon production rates. Furthermore, the minimal $g^{(2)}$ value is unchanged for a large range in pump beam intensity. These results are interesting for applications where achieving low, stable values of $g^{(2)}$ is of primary importance.

arXiv:1803.02401•Optics Express•May 4, 2018•0 citations

Optimization of periodic single-photon sources

Петер Адам, Matyas I. Mechler, Imre Sánta +1 more

We introduce a theoretical framework which is suitable for the description of all spatial and time-multiplexed periodic single-photon sources realized or proposed thus far. Our model takes into account all possibly relevant loss mechanisms. This statistical analysis of the known schemes shows that multiplexing systems can be optimized in order to produce maximal single-photon probability for various sets of loss parameters by the appropriate choice of the number of multiplexed units of spatial multiplexers or multiplexed time intervals and the input mean photon pair number and reveals the physical reasons of the existence of the optimum. We propose a time-multiplexed scheme to be realized in bulk optics, which, according to the present analysis, would have promising performance when experimentally realized. It could provide a single-photon probability of 85% with a choice of experimental parameters which are feasible according to the experiments known from the literature.

arXiv:1408.3266•Physical Review A•Nov 18, 2014•29 citations
The properties of a heralded single-photon source with temporal and spatial multiplexing are studied with the aim to maximize its efficiency for a given value of the second-order zero-time autocorrelation function. We show that the variable time delay, which is used for temporal multiplexing, can be optimized so that the mean number of photon passes through the switches and the total number of switches are respectively reduced to ∼ log 2 N and ∼ (1/2)log 2 N , where N is the temporal multiplexing degree. The total efficiency of such an optimized source is calculated for typical switching losses and the autocorrelation function is calculated in the presence of the detector dark-count noise.
Detectors inherently capable of resolving photon numbers have undergone a significant development recently, and this is expected to affect multiplexed periodic single-photon sources where such detectors can find their applications. We analyze various spatially and time-multiplexed periodic single-photon source arrangements with photon-number-resolving detectors, partly to identify the cases when they outperform those with threshold detectors. We develop a full statistical description of these arrangements in order to optimize such systems with respect to maximal single-photon probability, taking into account all relevant loss mechanisms. The model is suitable for the description of all spatial and time multiplexing schemes. Our detailed analysis of symmetric spatial multiplexing identifies a particular range of loss parameters in which the use of the new type of detectors leads to an improvement. Photon number resolution opens an additional possibility for optimizing the system in that the heralding strategy can be defined in terms of actual detected photon numbers. Our results show that this kind of optimization opens an additional parameter range of improved efficiency. Moreover, this higher efficiency can be achieved by using less multiplexed units, i.e., smaller system size as compared to threshold-detector schemes. We also extend our investigation to certain time-multiplexed schemes of actual experimental relevance. We find that the highest single-photon probability is 0.907 that can be achieved by binary bulk time multiplexers using photon-number-resolving detectors.
Multiplexed single-photon sources can produce indistinguishable single photons with high probability in near-perfect spatial modes. Such systems, realized with optical elements having losses, can be optimized—that is, both the optimal number of multiplexed units in the sources and the optimal mean number of photon pairs generated in a multiplexed unit, for which the output single-photon probability is maximal, can be determined. The accompanying multiphoton noise of the sources, arising from the probabilistic nature of the underlying physical processes in these systems, can be detrimental in certain applications. Inspired by this fact, we develop a procedure aimed at decreasing the multiphoton noise of multiplexed single-photon sources. The procedure is based on the reoptimization of the system for the chosen value of the normalized second-order autocorrelation function characterizing the multiphoton noise. The results of this reoptimization are shown for two types of spatially multiplexed single-photon sources. We find that by applying the proposed procedure, the multiphoton noise can be considerably decreased along with a relatively low decrease in the single-photon probability. Although the method presented here is for two spatially multiplexed single-photon sources, it can be applied straightforwardly for any type of multiplexed single-photon source.
Photonic qubits constitute a leading platform to disruptive quantum technologies due to their unique low-noise properties. The cost of the photonic approach is the non-deterministic nature of many of the processes, including single-photon generation, which arises from parametric sources and negligible interaction between photons. Active temporal multiplexing - repeating a generation process in time and rerouting to single modes using an optical switching network - is a promising approach to overcome this challenge and will likely be essential for large-scale applications with greatly reduced resource complexity and system sizes. Requirements include the precise synchronization of a system of low-loss switches, delay lines, fast photon detectors, and feed-forward. Here we demonstrate temporal multiplexing of 8 'bins' from a double-passed heralded photon source and observe an increase in the heralding and heralded photon rates. This system points the way to harnessing temporal multiplexing in quantum technologies, from single-photon sources to large-scale computation.
With the recent progresses in quantum technologies, single photon sources have gained a primary relevance. Here we present a heralded single photon source characterized by an extremely low level of noise photons, realized by exploiting low-jitter electronics and detectors and fast custom-made electronics used to control an optical shutter (a LiNbO3 waveguide optical switch) at the output of the source. This single photon source showed a second-order autocorrelation function g(2)(0) = 0:005(7), and an Output Noise Factor (defined as the ratio of noise photons to total photons at the source output) of 0:25(1)%, among the best ever achieved.
Heralded single photon sources are often implemented using spontaneous parametric downconversion, but their quality can be restricted by optical loss, double pair emission and detector dark counts. Here, we show that the performance of such sources can be improved using cascaded downconversion, by providing a second trigger signal to herald the presence of a single photon, thereby reducing the effects of detector dark counts. We find that for a setup with fixed detectors, an improved heralded second-order correlation function g(2)g^{(2)}g(2) can always be achieved with cascaded downconversion given sufficient efficiency for the second downconversion, even for equal single-photon production rates. Furthermore, the minimal g(2)g^{(2)}g(2) value is unchanged for a large range in pump beam intensity. These results are interesting for applications where achieving low, stable values of g(2)g^{(2)}g(2) is of primary importance.
We introduce a theoretical framework which is suitable for the description of all spatial and time-multiplexed periodic single-photon sources realized or proposed thus far. Our model takes into account all possibly relevant loss mechanisms. This statistical analysis of the known schemes shows that multiplexing systems can be optimized in order to produce maximal single-photon probability for various sets of loss parameters by the appropriate choice of the number of multiplexed units of spatial multiplexers or multiplexed time intervals and the input mean photon pair number and reveals the physical reasons of the existence of the optimum. We propose a time-multiplexed scheme to be realized in bulk optics, which, according to the present analysis, would have promising performance when experimentally realized. It could provide a single-photon probability of 85% with a choice of experimental parameters which are feasible according to the experiments known from the literature.