Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

A compact, high-performance all optical atomic clock based on telecom lasers

John H. Burke, N. Lemke, Gretchen R. Phelps, Kyle W. Martin

Published Mar 7, 2016• 6 citations
Publisher

Abstract

We discuss an optical atomic clock based on a two-photon transition at 778 nm in rubidium. In particular, we discuss the fundamental limitations to the short-term stability of a system based on a commercial C-band telecom laser as opposed to a near infrared laser. We show that this system is fundamentally capable of besting a hydrogen MASER in frequency stability and size.

DOI
10.1117/12.2220212

Related papers

Compact Optical Clock with 5×10 −13 Instability at 1 s

Gretchen R. Phelps, N. Lemke, Christopher Erickson +2 more

We present a compact optical atomic clock design based on a two-photon transition at 778 nm in rubidium that is capable of a frequency instability of 5×10−13 at 1 s. The simple architecture occupies less than 30 L volume and currently uses commercial off-the-shelf components making this system an attractive, appealing, and competitive candidate to meet GPS-III spacecraft frequency stability requirements. Copyright © 2018 Institute of Navigation.

NAVIGATION Journal of the Institute of Navigation•Mar 1, 2018•18 citations

Compact 780-nm Rb optical clock

Zhendong Chen, Tianyu Liu, Ruoao Yang +9 more

We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.

arXiv:2501.01826•Physical Review Applied•Nov 24, 2025•6 citations

Compact two-photon optical clock with a long-term stability of 8.1 × 10−15 without linear drift removal

Chen Feng, Xinrui Luo, Ji’an Duan +5 more

In this work, we stabilize a 1556.2 nm fiber laser to the 5S1/2 → 5D5/2 two-photon transition in 87Rb in a carefully designed compact physics package. A commercial fiber frequency comb divides the optical frequency into 200 MHz microwave output, which demonstrates a fractional frequency stability of 2.2 × 10-13 at τ = 1 s and 8.1 × 10-15 at τ = 4000 s, without linear drift removal. We analyze the systematic effect on the short-term and long-term stabilities in detail. The short-term and long-term stabilities are limited by shot noise and ac Stark shift, respectively. The rubidium two-photon optical clock is a promising candidate for the next-generation space-borne atomic clock.

Review of Scientific Instruments•Dec 1, 2025•3 citations

High-performance, compact optical standard

Zachary L. Newman, Vincent N. Maurice, Connor D. Fredrick +6 more

We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an instability of 1.8 × 10 − 13 τ − 1 / 2 for times less than 100 s and a flicker noise floor of 1 × 10 − 14 out to 6000 s. At long integration times, the instability is limited by variations in optical probe power and the ac Stark shift. The retrace was measured to 5.7 × 10 − 13 after 30 h of dormancy. Such a simple, yet high-performance optical standard could be suitable as an accurate realization of the meter or, if coupled with an optical frequency comb, as a compact atomic clock comparable to a hydrogen maser.

arXiv:2105.00610•Optics Letters•Aug 17, 2021•81 citations

An optical atomic clock using 4 D J states of rubidium

Alisher Duspayev, C Owens, Bineet Dash +1 more

Abstract We analyze an optical atomic clock using two-photon 5 S 1 / 2 → 4 D J transitions in rubidium. Four one- and two-color excitation schemes to probe the 4 D 3 / 2 and 4 D 5 / 2 fine-structure states are considered in detail. We compare key characteristics of Rb 4 D J and 5 D 5 / 2 two-photon clocks. The 4 D J clock features a high signal-to-noise ratio due to two-photon decay at favorable wavelengths, low dc electric and magnetic susceptibilities, and minimal black-body shifts. Ac Stark shifts from the clock interrogation lasers are compensated by two-color Rabi-frequency matching. We identify a ‘magic’ wavelength near 1060 nm, which allows for in-trap, Doppler-free clock-transition interrogation with lattice-trapped cold atoms. From our analysis of clock statistics and systematics, we project a quantum-noise-limited relative clock stability at the 10 − 13 / τ ( s ) -level, with integration time τ in seconds, and a relative accuracy of ∼ 10 − 13 . We describe a potential architecture for implementing the proposed clock using a single telecom clock laser at 1550 nm, which is conducive to optical communication and long-distance clock comparisons. Our work could be of interest in efforts to realize small and portable Rb clocks and in high-precision measurements of atomic properties of Rb 4 D J -states.

arXiv:2406.09352•Quantum Science and Technology•Sep 6, 2024•7 citations

Progress Towards the Development of a Portable All-optical Atomic Clock Based on a Two-photon Transition in Warm Atomic Vapor

S. Jana, B. K. Sahoo, Arijit Sharma

Optical clocks represent the hallmark of precise timekeeping. The most precise atomic clocks are laboratory-based ones that utilize transitions in the microwave/optical domain of neutral atoms or trapped ions. These clocks define an international time scales, confirm the consistency of physical constants and stimulate the search for new physics outside the Standard Model. The other area is the regime of portable atomic clocks based on warm atomic vapor, which is small, power-efficient and deployable in the field with a variety of civilian applications, including sensing, communication and navigation. Two-photon resonance and optical transition based field deployable clocks present a viable alternative that may outperform current commercial chip scale clocks by at least a factor of 10 in terms of both long-term and short-term stability. For portable clocks, two-photon transitions in alkaline earth metals are of special interest. One of the systematic inaccuracies in the optical reference is eliminated by using counter-propagating laser beams to create Doppler-free spectroscopy. At IIT Tirupati, we are engaged in developing the next generation of atomic vapor based portable frequency standard using two-photon transition in Rubidium (Rb) for atomic sensing and quantum positioning applications. This article discusses the physics behind the two-photon transition in Rubidium atoms suitable for a clock reference. Briefly, it discusses the experimental methodology for realizing an optical clock using warm rubidium vapor.

URSI Regional Conference on Radio Science (URSI-RCRS)•Dec 1, 2022•1 citation
We discuss an optical atomic clock based on a two-photon transition at 778 nm in rubidium. In particular, we discuss the fundamental limitations to the short-term stability of a system based on a commercial C-band telecom laser as opposed to a near infrared laser. We show that this system is fundamentally capable of besting a hydrogen MASER in frequency stability and size.
We demonstrated a compact 780 nm rubidium optical clock, which includes an optical frequency standard and an optical frequency comb, with an optical volume of 11.6 liters. Unlike the 778 nm rubidium atomic clocks based on two-photon transition, here, the laser frequency is stabilized to the Rb D2 transition, using modulation transfer spectroscopy. This approach effectively eliminates Doppler background and provides a high signal to noise ratio and high sensitivity. A nearly 300 MHz microwave signal, whose phase exactly tracks that of the optical frequency standard, is generated via the optical frequency comb, yielding a frequency instability of 1.91 E-13 @1 s and 5.29 E-14 @1000 s in the electronic domain. To the best of our knowledge, this is the most precise frequency stabilization result for the first-excited-state transition of alkali metal atoms to date and represents the first optical clock based on this transition. These results offer a promising approach for the development of portable optical clocks.
In this work, we stabilize a 1556.2 nm fiber laser to the 5S1/2 → 5D5/2 two-photon transition in 87Rb in a carefully designed compact physics package. A commercial fiber frequency comb divides the optical frequency into 200 MHz microwave output, which demonstrates a fractional frequency stability of 2.2 × 10-13 at τ = 1 s and 8.1 × 10-15 at τ = 4000 s, without linear drift removal. We analyze the systematic effect on the short-term and long-term stabilities in detail. The short-term and long-term stabilities are limited by shot noise and ac Stark shift, respectively. The rubidium two-photon optical clock is a promising candidate for the next-generation space-borne atomic clock.
We describe a high-performance, compact optical frequency standard based on a microfabricated Rb vapor cell and a low-noise, external cavity diode laser operating on the Rb two-photon transition at 778 nm. The optical standard achieves an instability of 1.8 × 10 − 13 τ − 1 / 2 for times less than 100 s and a flicker noise floor of 1 × 10 − 14 out to 6000 s. At long integration times, the instability is limited by variations in optical probe power and the ac Stark shift. The retrace was measured to 5.7 × 10 − 13 after 30 h of dormancy. Such a simple, yet high-performance optical standard could be suitable as an accurate realization of the meter or, if coupled with an optical frequency comb, as a compact atomic clock comparable to a hydrogen maser.
Abstract We analyze an optical atomic clock using two-photon 5 S 1 / 2 → 4 D J transitions in rubidium. Four one- and two-color excitation schemes to probe the 4 D 3 / 2 and 4 D 5 / 2 fine-structure states are considered in detail. We compare key characteristics of Rb 4 D J and 5 D 5 / 2 two-photon clocks. The 4 D J clock features a high signal-to-noise ratio due to two-photon decay at favorable wavelengths, low dc electric and magnetic susceptibilities, and minimal black-body shifts. Ac Stark shifts from the clock interrogation lasers are compensated by two-color Rabi-frequency matching. We identify a ‘magic’ wavelength near 1060 nm, which allows for in-trap, Doppler-free clock-transition interrogation with lattice-trapped cold atoms. From our analysis of clock statistics and systematics, we project a quantum-noise-limited relative clock stability at the 10 − 13 / τ ( s ) -level, with integration time τ in seconds, and a relative accuracy of ∼ 10 − 13 . We describe a potential architecture for implementing the proposed clock using a single telecom clock laser at 1550 nm, which is conducive to optical communication and long-distance clock comparisons. Our work could be of interest in efforts to realize small and portable Rb clocks and in high-precision measurements of atomic properties of Rb 4 D J -states.
Optical clocks represent the hallmark of precise timekeeping. The most precise atomic clocks are laboratory-based ones that utilize transitions in the microwave/optical domain of neutral atoms or trapped ions. These clocks define an international time scales, confirm the consistency of physical constants and stimulate the search for new physics outside the Standard Model. The other area is the regime of portable atomic clocks based on warm atomic vapor, which is small, power-efficient and deployable in the field with a variety of civilian applications, including sensing, communication and navigation. Two-photon resonance and optical transition based field deployable clocks present a viable alternative that may outperform current commercial chip scale clocks by at least a factor of 10 in terms of both long-term and short-term stability. For portable clocks, two-photon transitions in alkaline earth metals are of special interest. One of the systematic inaccuracies in the optical reference is eliminated by using counter-propagating laser beams to create Doppler-free spectroscopy. At IIT Tirupati, we are engaged in developing the next generation of atomic vapor based portable frequency standard using two-photon transition in Rubidium (Rb) for atomic sensing and quantum positioning applications. This article discusses the physics behind the two-photon transition in Rubidium atoms suitable for a clock reference. Briefly, it discusses the experimental methodology for realizing an optical clock using warm rubidium vapor.