Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Characterizing the AC-MOT

M. Anholm

Published Jan 1, 2014• 0 citations
Publisher

Abstract

Magneto-Optical Traps (MOTs) have long been used to produce samples of cold trapped neutral atoms, which can be used in the measurement of a variety of physical quantities and theories. Until recently, one limitation of this type of trap was the necessity for the presence of a relatively large magnetic field which would decay only slowly after the trapping mechanism was turned off. This residual magnetic field is expected to partially destroy any atomic polarization induced, for example, by optical pumping. As a result, the precision of any physical measurement which requires polarization is limited. We will discuss the construction of our version of a newer type of MOT, the AC-MOT [2], which is designed specifically so as to minimize residual magnetic fields. We have found that our AC-MOT has lifetimes and cloud sizes similar to those we measured in our DC-MOT. We intend to use a trap similar to this in upcoming nuclear beta decay parity-violation measurements. We also discuss the numerical evolution of the optical Bloch equations in the presence of transverse and longitudinal magnetic fields, so as to quantify the effect of a magnetic field on atomic polarization.

DOI
10.14288/1.0165992

Related papers

Cold Atom Trap with Zero Residual Magnetic Field: The ac Magneto-Optical Trap

Matthew Harvey, Andrew James Murray

A novel atom trap is described using alternating current to generate the magnetic B field, together with high speed polarization switching of the damping laser field. This combination produces a trap as effective as a standard magneto-optical trap (MOT), with the advantage that the average B field is zero. No net current is hence induced in surrounding conductive elements, and the B field produced by the ac MOT is found to switch off >300 times faster than a conventional MOT. New experiments can hence be performed, including charged particle probing or detection of the cold target ensemble.

Physical Review Letters•Oct 22, 2008•32 citations

Electron scattering from cold atoms - Design and operation of the AC driven Magneto Optical Trap (AC-MOT)

Matthew Harvey, Andrew James Murray, John Chidowerem Agomuo

Electron scattering from cold atoms provides significant advantages compared to collisions with atoms emanating from a hot effusive source. Here we describe a new type of cold atom trap (the AC-MOT) that allows measurements from cold and trapped atoms at low impact energies, by eliminating the MOT magnetic fields very rapidly. The design and operation of the AC-MOT will be described, together with results from experiments that have been performed.

Journal of Physics Conference Series•Nov 5, 2012•0 citations

Construction of a Blue Neutral Cesium-133 Magneto-Optical Trap

Madison Whitmore

The magneto-optical trap (MOT) serves as the culmination of optical cooling and trapping, where by applying a linear magnetic field to orthogonal, circularly polarized, retroreflecting laser beams, one can produce a dense cloud of very cold atoms, on the order of μK. This work set out to create a magneto-optical trap using only visible light with the 6s 2S1/2 → 7p 2P◦ 3/2 transition of cesium-133, which is far weaker than the transition typically employed for a cesium-133 MOT. This transition alone has yet to be used in isolation to create a MOT, and the purpose of this work is to demonstrate the feasibility of such a MOT. While the creation of a MOT with the setup produced has thus far been unsuccessful, the components are in place for one to be made as a demonstration of optical cooling and trapping that should be visible to the naked eye. Additionally, an experimental setup was created for high precision measurements of the absolute energies of the 7p 2P◦ 1/2 and 7p 2P◦ 3/2 states. The theory behind the MOT and high precision spectroscopy is expounded upon within.

•May 1, 2025•0 citations

Towards precision beta-decay measurements with laser-cooled argon-35

Florence Lenaers, R. D. Glover, Thierry Bastin

Laser cooling and trapping techniques enjoy a solid reputation as powerful and elegant providers of well-localized, backing-free sources. Not only does this hold true within the atomic physics and quantum optics communities, but also beyond. Most notably, these techniques have recently joined the toolbox of low-energy, high-precision tests of the Standard Model. Our work with argon falls within the subset of nuclear beta decay studies, which have historically played a key role in establishing and testing our understanding of weak-interaction physics. In this framework, precision measurements of the beta asymmetry correlation parameter in the beta decay of Ar-35 have been identified as one promising probe for physics beyond the Standard Model. \n \nOur current work focuses on the development of a test magneto-optical trap (MOT) setup for Ar-40 as a preliminary step towards cooling and trapping Ar-35 atoms. In particular, much effort is being put into optimizing the efficiency of our source apparatus, which is crucial to achieving high enough statistics in the final trap. We present the current status of the experimental realization of our setup. \n \nMeasuring the beta asymmetry correlation parameter requires highly spin-polarized samples. Therefore, in parallel to our experimental work, we are numerically investigating methods for generating, controlling and precisely measuring the degree of spin polarization of a sample of Ar-35 atoms. We also aim at being able to quickly switch between a polarized and a non-polarized sample so as to better understand systematic effects. We report on the progress of our theoretical modeling.

•Oct 18, 2016•0 citations

Characterization of cold atomic cloud in a magneto-optical trap

Poonam Arora, Swatilekha Chowdhury, Ashish Agarwal +2 more

The results of characterization of cold cloud of cesium (Cs) atoms trapped in a magneto-optical trap (MOT) have been \npresented. The MOT is a part of the Physics package of the Cs Fountain Clock being developed at National Physical \nLaboratory (NPL), India. The number of atoms, size and temperature of the cloud have been measured and calculated. It is also been investigated how the number of trapped atoms changes with the trapping laser’s beam intensity, detuning and magnetic-field gradient of the trap. \n

•Sep 1, 2011•0 citations

The AC-MOT cold atom electron source

Michael E. Jones

This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies. The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source. The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than �ˆ�175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources. The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches. Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.

•May 31, 2019•1 citation
Magneto-Optical Traps (MOTs) have long been used to produce samples of cold trapped neutral atoms, which can be used in the measurement of a variety of physical quantities and theories. Until recently, one limitation of this type of trap was the necessity for the presence of a relatively large magnetic field which would decay only slowly after the trapping mechanism was turned off. This residual magnetic field is expected to partially destroy any atomic polarization induced, for example, by optical pumping. As a result, the precision of any physical measurement which requires polarization is limited. We will discuss the construction of our version of a newer type of MOT, the AC-MOT [2], which is designed specifically so as to minimize residual magnetic fields. We have found that our AC-MOT has lifetimes and cloud sizes similar to those we measured in our DC-MOT. We intend to use a trap similar to this in upcoming nuclear beta decay parity-violation measurements. We also discuss the numerical evolution of the optical Bloch equations in the presence of transverse and longitudinal magnetic fields, so as to quantify the effect of a magnetic field on atomic polarization.
A novel atom trap is described using alternating current to generate the magnetic B field, together with high speed polarization switching of the damping laser field. This combination produces a trap as effective as a standard magneto-optical trap (MOT), with the advantage that the average B field is zero. No net current is hence induced in surrounding conductive elements, and the B field produced by the ac MOT is found to switch off >300 times faster than a conventional MOT. New experiments can hence be performed, including charged particle probing or detection of the cold target ensemble.
The magneto-optical trap (MOT) serves as the culmination of optical cooling and trapping, where by applying a linear magnetic field to orthogonal, circularly polarized, retroreflecting laser beams, one can produce a dense cloud of very cold atoms, on the order of μK. This work set out to create a magneto-optical trap using only visible light with the 6s 2S1/2 → 7p 2P◦ 3/2 transition of cesium-133, which is far weaker than the transition typically employed for a cesium-133 MOT. This transition alone has yet to be used in isolation to create a MOT, and the purpose of this work is to demonstrate the feasibility of such a MOT. While the creation of a MOT with the setup produced has thus far been unsuccessful, the components are in place for one to be made as a demonstration of optical cooling and trapping that should be visible to the naked eye. Additionally, an experimental setup was created for high precision measurements of the absolute energies of the 7p 2P◦ 1/2 and 7p 2P◦ 3/2 states. The theory behind the MOT and high precision spectroscopy is expounded upon within.
Laser cooling and trapping techniques enjoy a solid reputation as powerful and elegant providers of well-localized, backing-free sources. Not only does this hold true within the atomic physics and quantum optics communities, but also beyond. Most notably, these techniques have recently joined the toolbox of low-energy, high-precision tests of the Standard Model. Our work with argon falls within the subset of nuclear beta decay studies, which have historically played a key role in establishing and testing our understanding of weak-interaction physics. In this framework, precision measurements of the beta asymmetry correlation parameter in the beta decay of Ar-35 have been identified as one promising probe for physics beyond the Standard Model. \n \nOur current work focuses on the development of a test magneto-optical trap (MOT) setup for Ar-40 as a preliminary step towards cooling and trapping Ar-35 atoms. In particular, much effort is being put into optimizing the efficiency of our source apparatus, which is crucial to achieving high enough statistics in the final trap. We present the current status of the experimental realization of our setup. \n \nMeasuring the beta asymmetry correlation parameter requires highly spin-polarized samples. Therefore, in parallel to our experimental work, we are numerically investigating methods for generating, controlling and precisely measuring the degree of spin polarization of a sample of Ar-35 atoms. We also aim at being able to quickly switch between a polarized and a non-polarized sample so as to better understand systematic effects. We report on the progress of our theoretical modeling.
The results of characterization of cold cloud of cesium (Cs) atoms trapped in a magneto-optical trap (MOT) have been \npresented. The MOT is a part of the Physics package of the Cs Fountain Clock being developed at National Physical \nLaboratory (NPL), India. The number of atoms, size and temperature of the cloud have been measured and calculated. It is also been investigated how the number of trapped atoms changes with the trapping laser’s beam intensity, detuning and magnetic-field gradient of the trap. \n
This thesis presents details of a new type of cold atom electron source (CAES) that uses an alternating current magneto-optical trap (AC-MOT). Cold atom electron sources produce electron bunches by threshold photoionisation from a population of laser-cooled atoms. The electrons extracted from the atoms are made into a beam which has an ultra-low transverse velocity distribution. The low velocity distribution increases the brightness and reduces the energy spread of the beam, making CAESs potential sources for future electron diffraction and electron spectroscopy studies. The newly commissioned source detailed here produces focused electron bunches with characteristic temperatures as low as 12.6 ± 0.8 K, at a rate of up to 10 Hz, and with a bunch charge of 2.2±0.2fC, comparable to other state-of-the-art cold atom electron sources. The AC-MOT CAES can also produce cold bunches with energies <200 eV, which is lower than has previously been reported for this type of source. The electrons originate from a population of laser-cooled 85Rb atoms held in an AC- MOT. The AC-MOT CAES design allows the magnetic trapping fields to be switched to zero in 32 μs, more than �ˆ�175 times faster than is possible using a comparable DC-MOT source. This means that electron bunches can be created and extracted in a magnetic field-free environment without any reduction in trap density and hence bunch charge, as occurs in conventional DC-MOT sources. The design, development, characterisation, and operation of the systems needed for the new AC-MOT CAES are detailed in this thesis. This includes details of the atom trapping system, the photoionisation system, the electron extraction system and the various timing systems for creation and characterisation of the resultant cold electron bunches. Finally, the characterisation of the AC-MOT CAES itself is presented, and the measured beam metrics are used to compare the new AC-MOT CAES with other CAES designs which are under development.