Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Two-stage quantum nondemolition experiment

Richard E. Slusher, Arthur La Porta, Seng‐Tiong Ho, Bernard Yurke

Published May 21, 1990• 0 citations
OpenAlex

Abstract

We have previously demonstrated a backaction evading (BAE) measurement apparatus based on simple optics and a parametric downconversion amplifier.1 This apparatus avoids contamination of the measured signal by the measurement process. Quantum correlations were demonstrated between the measured portion of the signal and the transmitted signal, while the mean level of the transmitted signal is equal to that of the input.

Related papers

Repeated backaction evading measurements: demonstration of a noiseless optical bus

Juan Ariel Levenson, Kamel Bencheikh, Philippe Grangier +1 more

Summary form only given. We report here repeated back action evading (BAE) experiments that clearly demonstrate all quantum nondemolition (QND) features for repeated measurements. An important feature is that each of the two BAE setups, based on pulsed type-II parametric amplifiers, also have performances that are the best achieved so far, and therefore make this demonstration more convincing. The conditional variance of the signal at the output of the first device measurement is given.

Quantum Electronics and Laser Science Conference•Jun 7, 1996•0 citations

Backaction evading measurements for quantum nondemolition detection and quantum optical tapping

Silvania F. Pereira, Z. Y. Ou, Harry J. Kimble

Backaction evading (BAE) measurements are described for optical parametric amplification with polarization mixing. Quantum correlations between the ``signal'' and ``meter'' outputs from the BAE device lead to an observed photocurrent variance 30% (1.5 dB) below the signal shot-noise level and to an inferred variance 44% below the vacuum-state level for determination of the signal field given the meter reading. Together with its efficient information transfer, this BAE detector functions as a quantum optical tap and is suitable for implementing quantum nondemolition detection.

Physical Review Letters•Jan 10, 1994•111 citations

Soliton backaction-evading measurement using spectral filtering

Friedrich König, B. C. Buchler, T. Rechtenwald +2 more

We report on a backaction-evading (BAE) measurement of the photon number of fiber-optical solitons operating in the quantum regime. We employ a recently proposed different detection scheme based on spectral filtering of colliding optical solitons. The measurements of the BAE criteria demonstrate significant quantum state preparation and transfer of the input signal to the signal and probe outputs exiting the apparatus, displaying the quantum-nondemolition behavior of the experiment.

arXiv:quant-ph/0209020•Physical Review A•Oct 23, 2002•23 citations

Quantum Nondemolition Demonstration via Repeated Backaction Evading Measurements

Kamel Bencheikh, Juan Ariel Levenson, Philippe Grangier +1 more

Repeated backaction evading measurements have been performed for the first time. The first backaction evading device prepares the field state while the second one measures it again. The conditional variance of the signal at the output of the first device given the measurement is 1.8 dB below the shot noise and the signal to noise ratio transfer coefficient is 1.34. The conditional variance of the final signal given the first device measurement is also 1.8 dB below the shot noise and the normalized correlation between the two meter outputs is 0.3. These figures are clearly in the quantum regime, and they constitute a full demonstration of the quantum nondemolition principle.

Physical Review Letters•Nov 6, 1995•79 citations

Protecting backaction-evading measurements from parametric instability

E. P. Ruddy, Yue Jiang, Nicholas Frattini +2 more

Noiseless measurement of a single quadrature in systems of parametrically coupled oscillators is theoretically possible by pumping at the sum and difference frequencies of the two oscillators, realizing a backaction-evading (BAE) scheme. Although this would hold true in the simplest scenario for a system with pure three-wave mixing, implementations of this scheme are hindered by unwanted higher-order parametric processes that destabilize the system and add noise. We show analytically that detuning the two pumps from the sum and difference frequencies can stabilize the system and fully recover the BAE performance, enabling operation at otherwise inaccessible cooperativities. We also show that the acceleration demonstrated in a weak-signal-detection experiment [Jiang et al., PRX Quantum 4, 020302 (2023)] was only achievable because of this detuning technique.

arXiv:2308.09168•Physical Review A•Aug 27, 2024•1 citation

Optical back-action-evading measurement with a parametric amplifier

Silvania F. Pereira, Z. Y. Ou, Harry J. Kimble

In quantum mechanics, the act of measurement perturbs the system by adding noise that usually contaminates subsequent measurements of the observable in question.

Annual Meeting Optical Society of America•Jan 1, 1993•0 citations
We have previously demonstrated a backaction evading (BAE) measurement apparatus based on simple optics and a parametric downconversion amplifier.1 This apparatus avoids contamination of the measured signal by the measurement process. Quantum correlations were demonstrated between the measured portion of the signal and the transmitted signal, while the mean level of the transmitted signal is equal to that of the input.
Backaction evading (BAE) measurements are described for optical parametric amplification with polarization mixing. Quantum correlations between the ``signal'' and ``meter'' outputs from the BAE device lead to an observed photocurrent variance 30% (1.5 dB) below the signal shot-noise level and to an inferred variance 44% below the vacuum-state level for determination of the signal field given the meter reading. Together with its efficient information transfer, this BAE detector functions as a quantum optical tap and is suitable for implementing quantum nondemolition detection.
Repeated backaction evading measurements have been performed for the first time. The first backaction evading device prepares the field state while the second one measures it again. The conditional variance of the signal at the output of the first device given the measurement is 1.8 dB below the shot noise and the signal to noise ratio transfer coefficient is 1.34. The conditional variance of the final signal given the first device measurement is also 1.8 dB below the shot noise and the normalized correlation between the two meter outputs is 0.3. These figures are clearly in the quantum regime, and they constitute a full demonstration of the quantum nondemolition principle.
Noiseless measurement of a single quadrature in systems of parametrically coupled oscillators is theoretically possible by pumping at the sum and difference frequencies of the two oscillators, realizing a backaction-evading (BAE) scheme. Although this would hold true in the simplest scenario for a system with pure three-wave mixing, implementations of this scheme are hindered by unwanted higher-order parametric processes that destabilize the system and add noise. We show analytically that detuning the two pumps from the sum and difference frequencies can stabilize the system and fully recover the BAE performance, enabling operation at otherwise inaccessible cooperativities. We also show that the acceleration demonstrated in a weak-signal-detection experiment [Jiang et al., PRX Quantum 4, 020302 (2023)] was only achievable because of this detuning technique.