Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

A laser diode system for 40K-87Rb atomic cooling

Wei Dong, Haixia Chen, Xiong De-Zhi, Jing Zhang, 山西大学光电研究所,量子光学与光量子器件国家重点实验室,太原 030006

Published Jan 1, 2006• 7 citations
Publisher

Abstract

We have developed a semiconductor laser system used in 40K-87Rb trapping and cooling experiment. The laser diode system is composed of three external cavity diode lasers and four injection diode lasers and a tapered amplifier. Four laser beams used for 40K and 87Rb cooling and repump lights are obtained by using acoustic optic modulators to offset the frequencies from the three external cavity diode lasers. Four light beams with different frequencies are injected into four slave lasers for injection locking. Then Rb cooling light, K cooling light and K repump light are injected into a semiconductor tapered amplifier in a master oscillator-power configuration. This configuration is flexible and stable and can simultaneously produce the cooling and repump light for 40K and 87Rb trapping and cooling experiment.

DOI
10.7498/aps.55.6342

Related papers

Dual-channel amplification in a single-mode diode laser for multi-isotope laser cooling

James L. Booth, Janelle Van Dongen, Paul M. Lebel +2 more

The output from two grating-stabilized external-cavity diode lasers were injected into a single-mode diode laser. Operating at a wavelength of 780 nm, this laser produced ~50 mW of power with two main frequency components of the same spectral characteristics of the seed lasers. The power ratio of the amplified components was freely adjustable due to gain saturation, and amplification was observed for frequency differences of the two seed lasers in the range from 73 MHz to 6.6 GHz. This system was used to realize a dual isotope magneto-optic trap (MOT) for rubidium (85Rb and 87Rb). The resulting position and cloud size of the dual isotope MOT was the same as that of the single species MOTs to within "±10 and "±20 μm, respectively. We also characterized the additional spectral components produced by four wave mixing (FWM) in the diode laser amplifier and utilized a particular FWM sideband to realize hyperfine pumping and subsequent laser trapping of 85Rb in the absence of a "repump" laser dedicated to hyperfine pumping.

Journal of the Optical Society of America B•Oct 31, 2007•9 citations

A scalable laser system at 461 nm for laser cooling and trapping of Sr atoms

Gunjan Verma, Enlong Wang, Joep Assendelft +4 more

Abstract The realization of compact high-power narrow-linewidth laser sources in the visible range has been a long-standing interest for the atomic physics community, especially in the field of laser cooling and trapping of alkaline-earth and alkaline-earth-like atoms. We report a simple master-slave injection-locked laser system capable of generating 500 mW at 460.86 nm with a linewidth of 1.6 MHz to realize magneto-optical trapping of strontium atoms on the $$5s^{2} \ ^{1}\mathrm {S}_{0}-5s5p \ ^{1}\mathrm {P}_{1}$$ 5 s 2 1 S 0 - 5 s 5 p 1 P 1 transition. The master laser used is an external cavity diode laser built with an anti-reflection coated laser diode in a Littrow configuration and the slave laser is built with a recently launched single mode high power GaN laser diode. We characterized the frequency noise, injection stability, spectral purity and relative intensity noise of the laser system. The reported laser system is used routinely to produce $$10^7$$ 10 7 strontium atoms at a temperature of 10 mK in a magneto-optical trap. The laser system offers a prominent alternative to the existing frequency-doubled laser systems in terms of cost, design flexibility, electrical power consumption, ease of scaling, intensity stability, and frequency tunability. The proposed system is also an effective solution for space-based experiments where a laser system’s size, weight, and electrical power consumption are crucial design parameters.

Applied Physics B•May 16, 2022•7 citations

An Injection-locked Diode Laser for Cold Rydberg Atom Experiments

Margaret S. Martei, Anders Wood, Duncan Tate

A free-running, temperature stabilized diode laser has been injection-locked to an external cavity diode laser for use in cold Rydberg atom experiments. Cold rubidium atoms in a magneto-optical trap (MOT) are excited to Rydberg states using a 10 ns laser pulse. The Rydberg atoms spontaneously ionize due to dipole forces, and the collisional ionization dynamics are observed as a function of atom density and principal quantum number of the Rydberg state, n. The injection-locked diode laser will be used as a repumper in conjunction with a dark spontaneous-force optical trap (SPOT) to increase the Rydberg state density. We report on the design of the injection-locked laser system.

•Jan 1, 2007•0 citations

A narrow linewidth diode laser system for strontium laser cooling applications

Sarah Nagel

The diode laser system for laser cooling on the 1S 0 → 3P1 intercombination line of strontium discussed in this thesis allows us to cool and trap an atomic strontium sample to 15 muK. Samples in this temperature range are useful for the development of the next generation of atomic frequency standards, cold collision studies, and as a step towards quantum degeneracy. This laser system consists of a Littrow configuration external-cavity diode laser, which is frequency locked to a high finesse cavity. The cavity is subsequently locked to an absorption feature to produce a few mW of tunable, stabilized, single mode power at the target wavelength. We present the design and characterization of this system, including a linewidth measurement of 70 kHz, as well as preliminary results from cooling and trapping.

•Jan 1, 2004•1 citation

A Laser System for Gray-Molasses Cooling on the D1 Transition of an Atomic Gas of 39K

Baraa Shammout

In this work we present the design and the construction of a laser system for cooling an atomic gas of potassium 39K on the D1-Line by gray molasses technique. The seed laser is an Interference-filter-stabilized external-cavity diode laser (ECDL). The laser frequency is stabilized to one of the atomic features of 39K D1-transition thanks to frequency modulation (FM) spectroscopy. The low seed power is then amplified by means of tapered amplifier (TA). Finally, the cooling and repumping beams are generated and blue-detuned from the atomic transitions |F = 2> → |F'= 2> and |F = 1> → |F'= 2> using two acousto-optic modulators (AOMs).

•Jan 1, 2020•2 citations

Diode-laser-based light sources for laser cooling of trapped Yb/sup +/ ions

K. Sugiyama, A. Wakita, A. Nakata

We are developing a light source at 370 nm for driving the /sup 2/S/sub 1/2/-/sup 2/P/sub 1/2/ cooling transition by sum-frequency mixing of radiation from two diode lasers with a doubly resonant external cavity. To drive the /sup 2/D/sub 3/2/-/sup 3/D[3/2]/sub 1/2/ repumping transition at 935 nm, we developed two types of external cavity diode lasers. Applications of them to laser-cooled trapped Yb/sup +/ ions are also presented.

Conference on Precision Electromagnetic Measurements•Nov 7, 2002•4 citations
We have developed a semiconductor laser system used in 40K-87Rb trapping and cooling experiment. The laser diode system is composed of three external cavity diode lasers and four injection diode lasers and a tapered amplifier. Four laser beams used for 40K and 87Rb cooling and repump lights are obtained by using acoustic optic modulators to offset the frequencies from the three external cavity diode lasers. Four light beams with different frequencies are injected into four slave lasers for injection locking. Then Rb cooling light, K cooling light and K repump light are injected into a semiconductor tapered amplifier in a master oscillator-power configuration. This configuration is flexible and stable and can simultaneously produce the cooling and repump light for 40K and 87Rb trapping and cooling experiment.
The output from two grating-stabilized external-cavity diode lasers were injected into a single-mode diode laser. Operating at a wavelength of 780 nm, this laser produced ~50 mW of power with two main frequency components of the same spectral characteristics of the seed lasers. The power ratio of the amplified components was freely adjustable due to gain saturation, and amplification was observed for frequency differences of the two seed lasers in the range from 73 MHz to 6.6 GHz. This system was used to realize a dual isotope magneto-optic trap (MOT) for rubidium (85Rb and 87Rb). The resulting position and cloud size of the dual isotope MOT was the same as that of the single species MOTs to within "±10 and "±20 μm, respectively. We also characterized the additional spectral components produced by four wave mixing (FWM) in the diode laser amplifier and utilized a particular FWM sideband to realize hyperfine pumping and subsequent laser trapping of 85Rb in the absence of a "repump" laser dedicated to hyperfine pumping.
Abstract The realization of compact high-power narrow-linewidth laser sources in the visible range has been a long-standing interest for the atomic physics community, especially in the field of laser cooling and trapping of alkaline-earth and alkaline-earth-like atoms. We report a simple master-slave injection-locked laser system capable of generating 500 mW at 460.86 nm with a linewidth of 1.6 MHz to realize magneto-optical trapping of strontium atoms on the 5s2 1S0−5s5p 1P15s^{2} \ ^{1}\mathrm {S}_{0}-5s5p \ ^{1}\mathrm {P}_{1}5s2 1S0​−5s5p 1P1​ 5 s 2 1 S 0 - 5 s 5 p 1 P 1 transition. The master laser used is an external cavity diode laser built with an anti-reflection coated laser diode in a Littrow configuration and the slave laser is built with a recently launched single mode high power GaN laser diode. We characterized the frequency noise, injection stability, spectral purity and relative intensity noise of the laser system. The reported laser system is used routinely to produce 10710^7107 10 7 strontium atoms at a temperature of 10 mK in a magneto-optical trap. The laser system offers a prominent alternative to the existing frequency-doubled laser systems in terms of cost, design flexibility, electrical power consumption, ease of scaling, intensity stability, and frequency tunability. The proposed system is also an effective solution for space-based experiments where a laser system’s size, weight, and electrical power consumption are crucial design parameters.
A free-running, temperature stabilized diode laser has been injection-locked to an external cavity diode laser for use in cold Rydberg atom experiments. Cold rubidium atoms in a magneto-optical trap (MOT) are excited to Rydberg states using a 10 ns laser pulse. The Rydberg atoms spontaneously ionize due to dipole forces, and the collisional ionization dynamics are observed as a function of atom density and principal quantum number of the Rydberg state, n. The injection-locked diode laser will be used as a repumper in conjunction with a dark spontaneous-force optical trap (SPOT) to increase the Rydberg state density. We report on the design of the injection-locked laser system.
The diode laser system for laser cooling on the 1S 0 → 3P1 intercombination line of strontium discussed in this thesis allows us to cool and trap an atomic strontium sample to 15 muK. Samples in this temperature range are useful for the development of the next generation of atomic frequency standards, cold collision studies, and as a step towards quantum degeneracy. This laser system consists of a Littrow configuration external-cavity diode laser, which is frequency locked to a high finesse cavity. The cavity is subsequently locked to an absorption feature to produce a few mW of tunable, stabilized, single mode power at the target wavelength. We present the design and characterization of this system, including a linewidth measurement of 70 kHz, as well as preliminary results from cooling and trapping.
In this work we present the design and the construction of a laser system for cooling an atomic gas of potassium 39K on the D1-Line by gray molasses technique. The seed laser is an Interference-filter-stabilized external-cavity diode laser (ECDL). The laser frequency is stabilized to one of the atomic features of 39K D1-transition thanks to frequency modulation (FM) spectroscopy. The low seed power is then amplified by means of tapered amplifier (TA). Finally, the cooling and repumping beams are generated and blue-detuned from the atomic transitions |F = 2> → |F'= 2> and |F = 1> → |F'= 2> using two acousto-optic modulators (AOMs).