A comparison between the noise characteristics of single-pump and dual-pump fiber optical parametric amplifiers is theoretically carried out in terms of the noise figure, accounting for the amplified quantum noise and the excess pump noise. (2 pages)
We derive an analytical theory for the noise figure of an undepleted and lossless fiber optical parametric amplifier (FOPA). Both the signal and the wavelength converted idler are investigated. Our theory is applicable for both an ideal pump power source, as well as a noisy one. We find that a noisy pump source can severely degrade the performance at high gain due to the stochastic gain-variations the signal and idler will experience. The theory is compared with Monte Carlo simulations of the FOPA and an excellent agreement is obtained. Simulations in the gain-depleted region show the possibility to reach below quantum-limited, phase-insensitive amplification for single channel transmission.
For the first time, four different noise sources, which are amplified quantum noise, Raman phonon seeded excess noise, pump transferred noise (PTN), and pump residual noise, are considered simultaneously to model the wavelength-dependent noise figure in a single-pumped fiber optical parametric amplifier. An asymmetric signal NF spectrum induced by both Raman phonon seeded excess noise and Raman gain modified PTN is measured in the electrical domain. Theoretical results agree very well with the experimental data. The idler NF spectrum is also analyzed and measured, which shows a more symmetric profile.
Flat and wide-bandwidth gain spectrum, along with phase-sensitive gain with no need to generate amplifier input idlers, can be achieved with a coupled dual-core fiber optical parametric amplifier. In this paper, we analyze the noise properties of such an amplifier. We achieve a 3 dB noise figure in the phase-insensitive case and a minimum of -6 dB noise figure in the phase-sensitive configuration. An alternative phase-sensitive configuration is also studied, that avoids the use of idlers at the input of the amplifier, leading to a 3 dB flat spectrum combined noise figure for the output signals. Pump transfer noise in phase-insensitive and phase-sensitive configurations is also studied along with the noise figure variation against the length of the amplifier.