The work in this thesis falls into two broad categories: creating Bose-Einstein condensates (BECs) in compact and portable systems, and manipulating neutral atoms in small systems to facilitate a continuously running neutral Rydberg atom quantum computer. The work with BECs focused on the miniaturization of ultracold matter systems. Ultracold matter has potential uses in many practical applications, such as atomic clocks, inertial sensors, and electric and magnetic field sensing. Much of the potential of atom chip based systems relies on the ability for the system to make its way out of the lab. The BEC system created occupies a volume of 0.4m^3 and operates at a repetition rate as high as 0.3Hz, creating Rubidium BECs of around 20k atoms. The system contains all of the components needed to produce and image BECs, including the UHV system, lasers, data acquisition hardware, electronics, and imaging equipment. The system can be easily reconfigured for different applications simply by changing the atom chip. As such, the hope is that it can serve as a standardized platform for a variety of portable experiments that utilize ultracold matter. The quantum computing work focuses on the ongoing work in atom manipulation for neutral Rydberg atom quantum computing. Neutral Rydberg atom quantum computing has great potential and, by harnessing the tool kit developed working with cold atoms, has the potential of scalability and continuous operation. An entirely new laser system and vacuum cell was built to work with Cesium. We have currently built a state of the art vacuum cell and developed far-detuned optical trapping and transport techniques to facilitate continuous quantum computing. Ongoing efforts include optical lattice generation and single-atom manipulation and imaging.
The work in this thesis falls into two broad categories: creating Bose-Einstein condensates (BECs) in compact and portable systems, and manipulating neutral atoms in small systems to facilitate a continuously running neutral Rydberg atom quantum computer. The work with BECs focused on the miniaturization of ultracold matter systems. Ultracold matter has potential uses in many practical applications, such as atomic clocks, inertial sensors, and electric and magnetic field sensing. Much of the potential of atom chip based systems relies on the ability for the system to make its way out of the lab. The BEC system created occupies a volume of 0.4m^3 and operates at a repetition rate as high as 0.3Hz, creating Rubidium BECs of around 20k atoms. The system contains all of the components needed to produce and image BECs, including the UHV system, lasers, data acquisition hardware, electronics, and imaging equipment. The system can be easily reconfigured for different applications simply by changing the atom chip. As such, the hope is that it can serve as a standardized platform for a variety of portable experiments that utilize ultracold matter. The quantum computing work focuses on the ongoing work in atom manipulation for neutral Rydberg atom quantum computing. Neutral Rydberg atom quantum computing has great potential and, by harnessing the tool kit developed working with cold atoms, has the potential of scalability and continuous operation. An entirely new laser system and vacuum cell was built to work with Cesium. We have currently built a state of the art vacuum cell and developed far-detuned optical trapping and transport techniques to facilitate continuous quantum computing. Ongoing efforts include optical lattice generation and single-atom manipulation and imaging.
Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with 105 atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.
This thesis describes the design, construction and optimisation of a new apparatus to produce Bose-Einstein condensates (BECs) of 87Rb atoms. The main aim in building this system was to include a high resolution imaging system capable of resolving single atoms. Optical access for the imaging system was created by including a stage of atom transport in which the atoms are magnetically transferred ~50 cm from a magneto-optical trap (MOT), where they are initially collected, to a glass science cell where experiments are carried out and imaging takes place. Two magnetic transport schemes have been demonstrated, based on approaches first used in other laboratories. First, a scheme in which the atoms are transferred in a moving pair of magnetic trapping coils. Second, a hybrid scheme where the atoms are translated part of the distance in the moving coils, and the rest of the way by switching the current in a chain of fixed coils. This second scheme was designed to allow optical access for a high numerical aperture microscope objective to be placed immediately next to the science cell for high resolution imaging.The atoms were first collected in a large pyramid MOT which can be loaded with 3 × 10^9 atoms in a time of 20 s. Around half of these atoms – those in the |F = 1, mF = −1> magnetic substate – were then magnetically trapped prior to transport. The typical fraction of the trapped atoms transferred to the science cell was ~30% and ~18% for the moving coils and hybrid schemes respectively.Evaporative cooling was carried out on the atom cloud following transport with the moving coils and loading into a time-orbiting potential trap. The optimised cooling sequence lasted for 28 s and consistently produced a pure condensate with 5 × 10^5 atoms. A BEC has also been produced by evaporative cooling following hybrid transport. The next experimental steps will be to optimise the hybrid transfer approach further and install the high resolution imaging system.The system is well-placed to continue an ongoing series of experiments in which ultracold atoms are trapped in RF-dressed potentials. These potentials will be used to study low-dimensional quantum gases as well as in experiments where small atom number BECs are rapidly rotated to enter the fractional quantum Hall regime.
We present an experimental apparatus that produces Bose-Einstein condensates (BECs) of 87Rb atoms at a rate of 1 Hz. As a demonstration of the system's ability to operate continuously, 30 BECs were produced and imaged in 32.1 s. Without imaging, a single BEC could be produced in 953 ms. The system uses an atom chip to confine atoms in a dimple trap with frequencies exceeding 1 kHz. With this tight trap, the duration of evaporative cooling was reduced to less than 0.5 s. Using principal component analysis, insight into the largest sources of noise and drift was obtained by extracting the dominant contributions to the variance. The system utilizes a compact physics package that can be integrated with lasers and electronics to create a transportable ultracold-atom device for applications outside of a laboratory environment.
Neutral atom quantum computing utilizes laser-trapped neutral atoms as qubits and realizes quantum logic gate operations through Rydberg-state interactions. In recent years, it has become one of the most vibrant directions in quantum computing hardware. This paper systematically reviews the working principles of neutral-atom quantum computers, including qubit encoding, atom trapping and manipulation, Rydberg states and interactions, the Rydberg blockade quantum gate mechanism, and atom rearrangement with reconfigurable architectures. The mainstream technical routes are surveyed, represented by optical tweezer arrays combined with Rydberg interactions, optical lattice schemes, and dipole trap arrays. A panoramic review is provided of domestic and international research progress from theoretical foundations in 2000 to the latest achievements in 2026, including thousand-qubit-scale systems, logical qubits, and quantum error correction experiments. Key breakthroughs are highlighted, such as the 6100-atom qubit array, continuous operation of a 3000-qubit system, quantum simulation of the Kitaev honeycomb model, toric code error correction demonstrations, encoding rates exceeding 1/2, and fault-tolerant architectures. The core bottlenecks are analyzed in depth, including the scalability--fidelity trade-off, engineering implementation of quantum error correction, atom loss and mid-circuit replenishment, laser system industrialization, control electronics scalability, and long-distance quantum interconnection. This paper aims to provide a systematic reference for academic research and technological development in this field.
In this habilitation-thesis a collection of 14 experiments is presented. In these experiments we have developed and used novel techniques to control ultracold gases on the quantum level. In brief, Bose-Einstein condensates (BEC) and degenerate Fermi gases of laser-cooled alkali atoms are subjected to specially designed optical and magnetic fields. The fields influence in a coherent way the behavior, properties and dynamics of the gases. On this basis we developed tools to prepare, coherently manipulate, and analyze pre-defined quantum states. With this high level of control, it was possible to investigate interesting physics phenomena, and we were able to achieve several breakthroughs in the field of ultracold atoms. Highlights of our experimental results include the demonstration of phase engineering of a BEC wavefunction where we created solitons in a BEC and studied their propagation. In another experiment we constructed a spatially resolved matter wave interferometer with which we mapped out the phase distribution on a condensate. Illuminating the BEC with a periodic pattern, i.e. an optical lattice, allowed us to study solid states physics phenomena. In a second set of experiments we demonstrated optically tuning of the interaction between atoms with optical Feshbach resonances. Employing either magnetically tunable Feshbach resonances or laser radiation, we were able to produce ground state molecules in well defined quantum states. This led to the production of the first molecular BEC. By tuning the coupling of atom pairs in a Fermi gas of atoms, we could for the first time investigate the so-called BEC-BCS crossover which describes the continuous change from a BEC superfluid to a Bardeen-Cooper Schrieffer (BCS) superfluid. Due to the excellent control on the quantum level, the developed cold atom techniques open up intriguing prospects for future applications and experiments. They represent a general tool box to investigate fundamental physical phenomena in a pure and undisturbed environment. In the future, cold atoms might serve as a testing ground for fundamental theories or as quantum simulators for complex systems.
A Bose-Einstein condensate (BEC) is a macroscopic ensemble of atoms that collectively behaves as a single quantum-mechanical object. In this thesis I describe an apparatus built to create and study a BEC, as well as initial experiments carried out using a one-dimensional optical standing wave (optical lattice) to manipulate the BEC. In the first experiment, a weak optical lattice Bragg-reflects a BEC moving in a nearly harmonic trap. The Bragg reflection combined with the harmonic trapping potential cause the BEC to oscillate, much as light oscillates in an optical cavity. In the second experiment, a deep optical lattice applied to an atom cloud for a short duration is used to split and recombine the atomic wavefunction. By doing this we can create two different types of atom interferometer: a small-separation atom interferometer which works with either a BEC or a thermal gas, and a large-separation atom interferometer which works only with a BEC and whose interferometric arms are, in principle, separately addressable. In the third experiment, an optical lattice potential is slowly turned on. Under the influence of this lattice potential, the BEC loses its superfluid properties, but fully regains them when the lattice is turned back off. This behavior is consistent both with a reversible transition to a 1-D Mott insulator state and with mean-field effects in a deep lattice; both interpretations are discussed. In the latter part of this thesis I describe an apparatus designed to accommodate experiments involving both a BEC and an ion. The interactions between an ion and a BEC have never before been experimentally investigated. Our apparatus includes both the means to localize an ion by actively shielding against stray electric fields and to spatially image ions. This should allow future experiments in which a single ion is embedded in a BEC. In addition to imaging ions, the apparatus provides the capability to create high-resolution images of distributions of neutral atoms by photoionizing them and then quickly imaging them. I conclude the thesis with a discussion of future experiments exploring ion-BEC interactions.