Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics Letters

Modulation Transfer Spectroscopy of Ytterbium Atoms in a Hollow Cathode Lamp

Wenli Wang, Xinye Xu

Published Mar 1, 2011• 6 citations
Publisher

Abstract

We present the experimental study of modulation transfer spectroscopy of ytterbium atoms in a hollow cathode lamp. The dependences of its linewidth, slope and magnitude on the various experimental parameters are measured and fitted by the well-known theoretical expressions. The experimental results are in good agreement with the theoretical prediction. We have observed the Dicke narrowing effect by increasing the current of the hollow cathode lamp. It is also found that there are the optimal current and laser power to generate the better modulation transfer spectroscopy signal, which can be employed for locking the laser frequency to the atomic transition.

DOI
10.1088/0256-307x/28/3/033202

Related papers

Frequency stabilization of a 399-nm laser by modulation transfer spectroscopy in an ytterbium hollow cathode lamp

Wenli Wang, Jie Ye, Hailing Jiang +3 more

The modulation transfer spectroscopy in an ytterbium hollow cathode lamp at 399 nm is measured. The error signal for frequency locking is optimized by measuring the dependences of its slope, linewidth and magnitude on various parameters. Under the optimum condition, the laser frequency at 399 nm can be stabilized. The long-term stability of laser frequency is measured by monitoring the fluorescence signal of the ytterbium atomic beam induced by the locked laser. The laser frequency is shown to be tightly locked, and the stabilized laser is successfully applied to the cooling of ytterbium atoms.

Chinese Physics B•Jan 1, 2011•14 citations

A novel method to measure the isotope shifts and hyperfine splittings of all ytterbium isotopes for a 399-nm transition

Wenli Wang, Xinye Xu

We report the experimental results on measuring the isotope shifts and hyperfine splittings of all ytterbium isotopes for a 399-nm transition by using a quite simple and novel method. It benefits from the advantages of the modulation transfer spectroscopy in an ytterbium hollow cathode lamp and the Doppler-free spectroscopy in a collimated ytterbium atomic beam. The key technique in this experiment is simultaneously measuring the frequency separations of the two spectra twice, and the separation difference between two measurements is solely determined by the well-defined frequency of an acousto-optics modulator. Compared with the most of previously reported experimental results, ours are more accurate and completed, which will provide the useful information for developing a more accurate theoretical model to describe the interaction inside an ytterbium atom.

Chinese Physics B•Dec 1, 2010•10 citations

Polarization spectroscopy of ^1S_0−^1P_1 transition of neutral ytterbium isotopes in hollow cathode lamp

Shaobing Zhu, Tao Chen, Xiaolin Li +1 more

We analyze the polarization spectrum of S10−P11 transition in atomic ytterbium with bosonic and fermionic isotopes in a hollow cathode lamp. Bosonic signals are created by saturation effects because of their only nondegenerate ground state, whereas fermionic counterparts are generated by optical pumping. The dependence of spectral signals on the cathode lamp current as well as the powers of the pump and probe beams are systematically investigated. Optimized parameters for future frequency-locking applications are suggested. The effects of pump beam polarization are determined by comparing results obtained from a circularly polarized pump beam to those obtained from an elliptically polarized one; here, enhanced signals were achieved by the former compared with the latter.

Journal of the Optical Society of America B•Sep 8, 2014•10 citations

Polarization spectroscopy of atomic erbium in a hollow cathode lamp

Jackson Ang’ong’a, Bryce Gadway

Abstract In this work we perform polarization spectroscopy of erbium atoms in a hollow cathode lamp (HCL). We review the theory behind Doppler-free polarization spectroscopy, theoretically model the expected erbium polarization spectra, and compare the numerically calculated spectra to our experimental data. We further analyze the dependence of the measured spectra on the HCL current and the peak intensities of our pump and probe lasers to determine conditions. Applications include wavelength stabilization of diode laser radiation to the 400.91 nm erbium transition.

arXiv:1711.00825•Journal of Physics B Atomic Molecular and Optical Physics•Dec 14, 2017•2 citations

Doppler-free spectroscopy of metastable Sr atoms using a hollow cathode lamp

Yusuke Hayakawa, Takumi Sato, Chika Watanabe +2 more

We report on the demonstration of Doppler-free spectroscopy of metastable Sr atoms using a hollow cathode lamp (HCL). We employed a custom Sr HCL, which is filled with a mixture of 0.5 Torr Ne and 0.5 Torr Xe as a buffer gas to suppress velocity changing collisions and increase the populations in all of the (5s5p)3PJ(J=0,1,2) metastable states. We performed frequency modulation spectroscopy for the (5s5p)3P0−(5s6s)3S1, (5s5p)3P1−(5s6s)3S1, (5s5p)3P2−(5s5d)3D2, and (5s5p)3P2−(5s5d)3D3 transitions with sufficient signal-to-noise ratios for laser frequency stabilization. We also observed the hyperfine transitions of (5s5p)3P2−(5s5d)3D3 of Sr87. This method would greatly facilitate laser cooling of Sr.

arXiv:1712.10156•Applied Optics•Feb 15, 2018•9 citations

Frequency stabilization and linewidth narrowing with modulation transfer spectroscopy

Xi Zhang, Hui Liu, Kunliang Jiang +4 more

We report laser frequency stabilization with modulation transfer spectroscopy (MTS) on 85 Rb atoms. With both PZT (piezo-electric transducer) slow-loop feedback and current fastloop feedback to the laser head, we get a linewidth narrowing less than 5 kHz simultaneously. Laser injection to a laser diode and frequency beating with another polarization spectroscopy based stabilization setup are also employed to check the narrow linewidth property. With the help of the technique, a linewidth around kHz-level laser is obtained and pave the way for the locking of the lattice laser of ytterbium clock with transfer cavity technique. The setup can be used as a frequency reference for precise frequency control of atomic clock system.

Wuhan University Journal of Natural Sciences•Jan 12, 2018•1 citation
We present the experimental study of modulation transfer spectroscopy of ytterbium atoms in a hollow cathode lamp. The dependences of its linewidth, slope and magnitude on the various experimental parameters are measured and fitted by the well-known theoretical expressions. The experimental results are in good agreement with the theoretical prediction. We have observed the Dicke narrowing effect by increasing the current of the hollow cathode lamp. It is also found that there are the optimal current and laser power to generate the better modulation transfer spectroscopy signal, which can be employed for locking the laser frequency to the atomic transition.
The modulation transfer spectroscopy in an ytterbium hollow cathode lamp at 399 nm is measured. The error signal for frequency locking is optimized by measuring the dependences of its slope, linewidth and magnitude on various parameters. Under the optimum condition, the laser frequency at 399 nm can be stabilized. The long-term stability of laser frequency is measured by monitoring the fluorescence signal of the ytterbium atomic beam induced by the locked laser. The laser frequency is shown to be tightly locked, and the stabilized laser is successfully applied to the cooling of ytterbium atoms.
We report the experimental results on measuring the isotope shifts and hyperfine splittings of all ytterbium isotopes for a 399-nm transition by using a quite simple and novel method. It benefits from the advantages of the modulation transfer spectroscopy in an ytterbium hollow cathode lamp and the Doppler-free spectroscopy in a collimated ytterbium atomic beam. The key technique in this experiment is simultaneously measuring the frequency separations of the two spectra twice, and the separation difference between two measurements is solely determined by the well-defined frequency of an acousto-optics modulator. Compared with the most of previously reported experimental results, ours are more accurate and completed, which will provide the useful information for developing a more accurate theoretical model to describe the interaction inside an ytterbium atom.
We analyze the polarization spectrum of S10−P11 transition in atomic ytterbium with bosonic and fermionic isotopes in a hollow cathode lamp. Bosonic signals are created by saturation effects because of their only nondegenerate ground state, whereas fermionic counterparts are generated by optical pumping. The dependence of spectral signals on the cathode lamp current as well as the powers of the pump and probe beams are systematically investigated. Optimized parameters for future frequency-locking applications are suggested. The effects of pump beam polarization are determined by comparing results obtained from a circularly polarized pump beam to those obtained from an elliptically polarized one; here, enhanced signals were achieved by the former compared with the latter.
Abstract In this work we perform polarization spectroscopy of erbium atoms in a hollow cathode lamp (HCL). We review the theory behind Doppler-free polarization spectroscopy, theoretically model the expected erbium polarization spectra, and compare the numerically calculated spectra to our experimental data. We further analyze the dependence of the measured spectra on the HCL current and the peak intensities of our pump and probe lasers to determine conditions. Applications include wavelength stabilization of diode laser radiation to the 400.91 nm erbium transition.
We report on the demonstration of Doppler-free spectroscopy of metastable Sr atoms using a hollow cathode lamp (HCL). We employed a custom Sr HCL, which is filled with a mixture of 0.5 Torr Ne and 0.5 Torr Xe as a buffer gas to suppress velocity changing collisions and increase the populations in all of the (5s5p)3PJ(J=0,1,2) metastable states. We performed frequency modulation spectroscopy for the (5s5p)3P0−(5s6s)3S1, (5s5p)3P1−(5s6s)3S1, (5s5p)3P2−(5s5d)3D2, and (5s5p)3P2−(5s5d)3D3 transitions with sufficient signal-to-noise ratios for laser frequency stabilization. We also observed the hyperfine transitions of (5s5p)3P2−(5s5d)3D3 of Sr87. This method would greatly facilitate laser cooling of Sr.
We report laser frequency stabilization with modulation transfer spectroscopy (MTS) on 85 Rb atoms. With both PZT (piezo-electric transducer) slow-loop feedback and current fastloop feedback to the laser head, we get a linewidth narrowing less than 5 kHz simultaneously. Laser injection to a laser diode and frequency beating with another polarization spectroscopy based stabilization setup are also employed to check the narrow linewidth property. With the help of the technique, a linewidth around kHz-level laser is obtained and pave the way for the locking of the lattice laser of ytterbium clock with transfer cavity technique. The setup can be used as a frequency reference for precise frequency control of atomic clock system.