Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Development of Fast NbN RSFQ Logic Gates in Sigma-Delta Converters for Space Telecommunications

Emanuele Baggaetta, M. Maignan, Jean-Claude Villégier

Published Jul 13, 2005• 0 citations
OpenAlex

Abstract

In the future generations of telecommunication satellites, it will be necessary to reduce the analog part in reception systems and achieve RF front-end at higher carrier frequencies with higher sensitivity and higher bandwidth. RSFQ (Rapid Single Flux Quantum) superconducting logic is suitable to process very high speed digital data processing with very low power dissipation and with performances well beyond what should be possible with CMOS technology in the next decades. The RSFQ circuit technology based on superconducting niobium nitride (NbN) presently developed at CEA-G involves NbN/Ta(sub X)N/NbN internally shunted Josephson junctions with high critical current density and high maximum switching frequency close to 1THz, as required by ultra-fast RSFQ electronics. Very low power dissipation and very low noise level of fast NbN RSFQ gates designed and fabricated at CEA-G are presented. The RSFQ circuit for a sampling comparator has been studied operating in a sigma-delta modulator with a 30 GHz sinusoidal input carrier signal and high sampling clock frequency of about 200 GHz. We will present the thermal noise and how it influences the phase fluctuations. Such a nitride technology has been recently demonstrated to be fully compatible with large scale integration on 200 mm diameter silicon wafer at reasonable fabrication cost in a micro-nano-electronic platform at CEA-Leti. The applicability of NbN RSFQ digital functions in the next decade Space Telecoms will finally be possible thanks to the development of reliable, low power consuming, space qualified cryocoolers operating at about 10K. Moreover semiconductor system design and integration techniques can be simply adapted to superconductivity, to fit the rules of any RSFQ library-foundry network, such as "CONNECT" for Japan and "FLUXONICS" for Europe.

Related papers

Design of integrated rapid single flux quantum circuits for fabrication in a niobium-based foundry process

Hannes Töpfer, Thomas Ortlepp

The article describes the activities aimed at bringing superconductive high-speed electronics towards maturity.Integrated circuits based on the effects in superconducting materials have become feasible for some years already.The main focus lies on the so-called Rapid Single-Flux-Quantum (RSFQ) electronics which allows the combination of high operation frequencies (well above 20 GHz) with very low energy consumption when logical states are changed.Thus, this circuit technology exhibits a promising potential for realising energy-efficient modules for signal processing and computing.Recently, a dedicated design infrastructure has been developed in Europe.Closely associated is a foundry for digital RSFQ integrated circuits so that the fabrication of integrated circuits is viable.In the contribution, the basic features of the RSFQ circuit design are addressed with special emphasis on implementation on the wafer scale.

USB-Flash-Ausg.:#R#<br/>Information technology and electrical engineering - devices and systems, materials and technologies for the future : 54. IWK, Internationales Wissenschaftliches Kolloquium ; proceedings ; 07 - 10 September 2009 / Faculty of Electrical and Information Technology, Technische Universität Ilmenau. - Ilmenau : Verl. ISLE, 2009. - ISBN 978-3-938843-45-1•Nov 25, 2009•0 citations

Superconducting RSFQ logic: Towards 100GHz digital electronics

Vratislav Michal, Emanuele Baggetta, Mario Aurino +2 more

The Rapid Single-Flux-Quantum logic (RSFQ) presents an efficient way to achieve ultra fast digital operations. This logic uses the macroscopic effects which can be found in nano-structured superconductor devices such as the Josephson AC and DC effects, and the magnetic flux quantization. As the typical time of the Josephson junction quantized phase leap 2π is in the order of picoseconds, the RSFQ circuits can operate with clock frequencies in the order of hundreds of GHz. This invited paper focuses on basic principles of superconducting RSFQ logic as well as on typical applications, such as the signal conversion or petaflops computing systems. In addition we point out the benefits of the semi-metallic NbN-TaxN-NbN Josephson junction technology, which has been developed at CEA-INAC in Grenoble.

International Conference Radioelektronika•Apr 1, 2011•10 citations

New Design and Implementation of a Fast Modulator in NbN Technology

Emanuele Baggetta, Bjoern Ebert, N. Hadacek +2 more

We have designed a band-pass sigma-delta modulator made in niobium nitride technology. The basic components of such a 10 GHz carrier frequency modulator are a band filtering resonator and an SFQ comparator synchronized with a clock frequency up to 200 GHz sampling rate. We describe the clock design including an internal JTL and its testing circuit based on frequency division. The technology involves NbN/Ta/sub x/N/NbN internally shunted Josephson junctions with Jc/spl sim/20kA/cm/sup 2/ and high RnIc product (/spl sim/1 mV) at 4.2 K. Junction parameters are shown to be controlled by the reactive sputtering conditions of the Ta/sub x/N barrier. SiO/sub 2//MgO bi-layers are used as dielectrics associated with NbN wiring layers and ground-plane. All layers are prepared in a way compatible with a full processing at about 350/spl deg/C in order to minimize the London penetration depth of NbN layers and thus to allow circuits operation at about 9 K. High frequency simulations of the modulator's circuits are presented, including the comparator, the DEMUX, and the resonator response.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•7 citations

Superconducting digital circuits with low-T/sub c/ and high-T/sub c/ materials

J.H. Kang, John X. Przybysz, Donald L. Miller +1 more

The authors argue that superconducting digital electronics is the future trend for high-speed and low-power applications. Low-T/sub c/ technology based on stable Nb-AlO/sub x/-Nb tunneling junctions has been successful in constructing most of the digital circuit logic elements. A four-stage shift register constructed with latching logic operated up to 4 GHz with a power consumption of about 60 mu W per gate. A 12-b analog-digital coverter constructed with a single flux quantum (SFQ) logic showed proper operation with the total power dissipated being only about 100 mu W. Fabrication of Josephson tunneling junctions with high-T/sub c/ materials has been tougher than with low-T/sub c/ materials. However, recently developed very high speed rapid single flux quantum (RSFQ) logic circuits can be applied to weak link type junctions fabricated with YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. Simulations of the various circuits with weak link type junctions, e.g., shift registers, analog-digital converters, etc., show fast operation and reasonable margins. Applications of similar concepts can be applied to NbN circuits operating at above 10 K.>

IEEE/Cornell Conference on Advanced Concepts in High Speed Semiconductor Devices and Circuits•Dec 9, 2002•0 citations

A niobium nitride-based analog to digital converter using rapid single flux quantum logic operating at 9.5 K

Masoud Radparvar

An analog to digital converter (ADC) using the rapid single flux quantum (RSFQ) logic family implemented in niobium nitride (NbN) technology is described. The circuit was originally developed and demonstrated in niobium technology. An identical circuit was then laid out, fabricated and demonstrated in NbN technology. The chips were fabricated using an eight-layer NbN-based process with Josephson junction critical current density of 500 A/cm/sup 2/. In this paper, we report on the measurement results for a 6-bit flux quantizing ADC which exhibited proper operation and good DC bias margins. We also demonstrate results from an ADC chip operating up to 9.5 K.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1994•14 citations

Design of superconductor digital circuits for a 30 GHz DSP and for interface to qubits

Samuel Intiso

Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.

•Jan 1, 2006•0 citations
In the future generations of telecommunication satellites, it will be necessary to reduce the analog part in reception systems and achieve RF front-end at higher carrier frequencies with higher sensitivity and higher bandwidth. RSFQ (Rapid Single Flux Quantum) superconducting logic is suitable to process very high speed digital data processing with very low power dissipation and with performances well beyond what should be possible with CMOS technology in the next decades. The RSFQ circuit technology based on superconducting niobium nitride (NbN) presently developed at CEA-G involves NbN/Ta(sub X)N/NbN internally shunted Josephson junctions with high critical current density and high maximum switching frequency close to 1THz, as required by ultra-fast RSFQ electronics. Very low power dissipation and very low noise level of fast NbN RSFQ gates designed and fabricated at CEA-G are presented. The RSFQ circuit for a sampling comparator has been studied operating in a sigma-delta modulator with a 30 GHz sinusoidal input carrier signal and high sampling clock frequency of about 200 GHz. We will present the thermal noise and how it influences the phase fluctuations. Such a nitride technology has been recently demonstrated to be fully compatible with large scale integration on 200 mm diameter silicon wafer at reasonable fabrication cost in a micro-nano-electronic platform at CEA-Leti. The applicability of NbN RSFQ digital functions in the next decade Space Telecoms will finally be possible thanks to the development of reliable, low power consuming, space qualified cryocoolers operating at about 10K. Moreover semiconductor system design and integration techniques can be simply adapted to superconductivity, to fit the rules of any RSFQ library-foundry network, such as "CONNECT" for Japan and "FLUXONICS" for Europe.
The article describes the activities aimed at bringing superconductive high-speed electronics towards maturity.Integrated circuits based on the effects in superconducting materials have become feasible for some years already.The main focus lies on the so-called Rapid Single-Flux-Quantum (RSFQ) electronics which allows the combination of high operation frequencies (well above 20 GHz) with very low energy consumption when logical states are changed.Thus, this circuit technology exhibits a promising potential for realising energy-efficient modules for signal processing and computing.Recently, a dedicated design infrastructure has been developed in Europe.Closely associated is a foundry for digital RSFQ integrated circuits so that the fabrication of integrated circuits is viable.In the contribution, the basic features of the RSFQ circuit design are addressed with special emphasis on implementation on the wafer scale.
The Rapid Single-Flux-Quantum logic (RSFQ) presents an efficient way to achieve ultra fast digital operations. This logic uses the macroscopic effects which can be found in nano-structured superconductor devices such as the Josephson AC and DC effects, and the magnetic flux quantization. As the typical time of the Josephson junction quantized phase leap 2π is in the order of picoseconds, the RSFQ circuits can operate with clock frequencies in the order of hundreds of GHz. This invited paper focuses on basic principles of superconducting RSFQ logic as well as on typical applications, such as the signal conversion or petaflops computing systems. In addition we point out the benefits of the semi-metallic NbN-TaxN-NbN Josephson junction technology, which has been developed at CEA-INAC in Grenoble.
We have designed a band-pass sigma-delta modulator made in niobium nitride technology. The basic components of such a 10 GHz carrier frequency modulator are a band filtering resonator and an SFQ comparator synchronized with a clock frequency up to 200 GHz sampling rate. We describe the clock design including an internal JTL and its testing circuit based on frequency division. The technology involves NbN/Ta/sub x/N/NbN internally shunted Josephson junctions with Jc/spl sim/20kA/cm/sup 2/ and high RnIc product (/spl sim/1 mV) at 4.2 K. Junction parameters are shown to be controlled by the reactive sputtering conditions of the Ta/sub x/N barrier. SiO/sub 2//MgO bi-layers are used as dielectrics associated with NbN wiring layers and ground-plane. All layers are prepared in a way compatible with a full processing at about 350/spl deg/C in order to minimize the London penetration depth of NbN layers and thus to allow circuits operation at about 9 K. High frequency simulations of the modulator's circuits are presented, including the comparator, the DEMUX, and the resonator response.
The authors argue that superconducting digital electronics is the future trend for high-speed and low-power applications. Low-T/sub c/ technology based on stable Nb-AlO/sub x/-Nb tunneling junctions has been successful in constructing most of the digital circuit logic elements. A four-stage shift register constructed with latching logic operated up to 4 GHz with a power consumption of about 60 mu W per gate. A 12-b analog-digital coverter constructed with a single flux quantum (SFQ) logic showed proper operation with the total power dissipated being only about 100 mu W. Fabrication of Josephson tunneling junctions with high-T/sub c/ materials has been tougher than with low-T/sub c/ materials. However, recently developed very high speed rapid single flux quantum (RSFQ) logic circuits can be applied to weak link type junctions fabricated with YBa/sub 2/Cu/sub 3/O/sub 7-x/ films. Simulations of the various circuits with weak link type junctions, e.g., shift registers, analog-digital converters, etc., show fast operation and reasonable margins. Applications of similar concepts can be applied to NbN circuits operating at above 10 K.>
An analog to digital converter (ADC) using the rapid single flux quantum (RSFQ) logic family implemented in niobium nitride (NbN) technology is described. The circuit was originally developed and demonstrated in niobium technology. An identical circuit was then laid out, fabricated and demonstrated in NbN technology. The chips were fabricated using an eight-layer NbN-based process with Josephson junction critical current density of 500 A/cm/sup 2/. In this paper, we report on the measurement results for a 6-bit flux quantizing ADC which exhibited proper operation and good DC bias margins. We also demonstrate results from an ADC chip operating up to 9.5 K.>
Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.