Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

A low bias variation SPAD-based pixel for a quantum random generator

Nicola Massari, Leonardo Gasparini, Alessandro Tomasi, Alessio Meneghetti, Daniele Perenzoni, David Stoppa

Published Oct 13, 2015• 2 citations
Publisher

Abstract

The present work is focused on the description of a SPAD-based pixel suitable for random bits extraction. Compared to the state-of-the-art, the proposed approach aims at improving the performance of the random generator with respect to possible photon flux variation. Thanks to the adopted methodology, the entropy of the output is maintained almost constant over a wide range of operating conditions. The principle has been validated through simulations and implemented in a compact pixel, suitable for array implementation.

DOI
10.1117/12.2195086

Related papers

16.3 A 16×16 pixels SPAD-based 128-Mb/s quantum random number generator with −74dB light rejection ratio and −6.7ppm/°C bias sensitivity on temperature

Nicola Massari, Leonardo Gasparini, Alessandro Tomasi +5 more

A robust true random number generator (TRNG), able to assure high quality output at different working conditions, is an attractive solution in secure communication application, because it increases resilience against possible external attacks. Among different TRNGs, quantum RNGs (QRNG) represent a good candidate for such systems, because of their compactness, low cost and performance [1–6]. They typically consist of a source of photons, such as an attenuated LED, coupled to a detector with single photon capability (SPAD). Many works in the literature have used a single detector [1–4] for random bit extraction. These devices are characterized by a limited bit rate [1], which can be increased by exploiting the arrival time of photons at the cost of circuit and system complexity [2–4]. Recent works [5–6] proposed to implement an array of detectors based on SPAD working in parallel thus extending the speed of QRNG up to 5 Gb/s [5]. Despite the high bit rate, the main drawback of [5] is the strong dependence of each pixel bias on the impinging light intensity which forces the system to work only for a narrow range of photon flux that poses several constraints on the design of the final QRNG system, e.g. the need of a feedback control loop to maintain a constant flux of photons, and of a uniform distribution of light over the entire sensor. Moreover, it is impractical to implement algorithms for bit extraction to all detectors of the array because of different responses and mismatches among SPADs.

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Jan 1, 2016•26 citations

A SPAD-Based Random Number Generator Pixel Based on the Arrival Time of Photons

Nicola Massari, Leonardo Gasparini, Alessio Meneghetti +1 more

A quantum random generator based on photon detection is here presented. The system consists of a source of photons, typically a commercial LED, coupled with a detector with single photon detection capability. The detector in this case is represented by a single pixel consisting of a SPAD and a time stamp circuit, which samples the arrival time of impinging photons within a predefined temporal window. The proposed implementation increases the efficiency of random bit extraction and reduces the afterpulsing probability, which can introduce undesirable correlation to the measurement. Preliminary results are reported, showing that the pixel has a flat behavior for a relevant range of intensity of the light, which makes the pixel robust against variations of external PVT parameters

IEEE International Conference on New Generation of Circuits and Systems (NGCAS)•Sep 1, 2017•6 citations

A Fully Integrated Quantum Random Number Generator for Cryptographic Application

Nicola Massari, Luca Parmesan, Alessandro Tontini +7 more

A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.

IEEE Transactions on Circuits and Systems I Regular Papers•Apr 16, 2026•0 citations

Live Demonstration: A self-adapting randomness extractor for a monolithic QRNG

Andrea Bonzi, Nicola Massari, Luca Parmesan +4 more

This live demonstration shows a monolithic quantum random number generator (QRNG) fabricated in a 22-nm standard CMOS technology and based on the dark events generated by a Single-Photon Avalanche Diode (SPAD). The random number generator relies on a novel methodology for random bit extraction based on an on-the-fly median estimation of the inter-arrival times between consecutive events. Thanks to this self-adapting mechanism, the quality of the output sequence is kept constant regardless of the working conditions.

IEEE International Symposium on Circuits and Systems proceedings•May 24, 2026•0 citations

SPAD-Based Quantum Random Number Generator With an $N^{\rm{th}}$ -Order Rank Algorithm on FPGA

Alessandro Tontini, Leonardo Gasparini, Nicola Massari +1 more

We present a compact, all-solid-state, low-cost quantum random number generator (QRNG) based on a single-photon avalanche diode (SPAD) and a field programmable gate array (FPGA). A new algorithm for random bit generation is described, ranking the inter-arrival times of a group of M photons detected by the SPAD device, and processed directly on the FPGA. The proposed approach improves the efficiency of generated random bits per detected photon, spanning from 0.5 bits/photon in case of 0 order rank, up to 0.875 bits/photon for second order rank. By extending the algorithm to higher orders, the proposed system approaches the maximum theoretical value of 1.0 bit/photon. The rate of generation of random numbers is limited by the SPAD minimum deadtime, achieving an experimentally proven bit rate of 7.3 Mbps. The standard randomness statistical tests are passed for a wide range of photon fluxes and for all the implemented rank orders with no additional post-processing on the generated sequence.

IEEE Transactions on Circuits & Systems II Express Briefs•Apr 3, 2019•13 citations

SPADs for quantum random number generators and beyond

Samuel Burri, Damien Stucki, Y. Maruyama +3 more

Single-Photon Avalanche Diodes (SPADs) are solid-state photo-detectors capable of detecting single photons by exploiting the avalanche effect that occurs in the breakdown of a p-n junction biased above breakdown voltage. By this effect, a SPAD translates an incoming photon to a macroscopic current pulse. These devices are currently used for building medical devices characterized by a very high time resolution. An appealing application of SPAD is to use them as a basic block for building the entropy source of true random number generators. In this paper we focus on such application, and we explore the design challenges behind the realization of a quantum random number generator based on a massively parallel array of SPADs. The matrix under investigation comprises 512×128 independent cells that convert photons onto a raw bit-stream, which, as ensured by the properties of quantum physics, is characterized by a very high level of randomness. The sequences are read out in a 128-bit parallel bus, concatenated, and pipelined onto a de-biasing filter. Subsequently, we fabricated the proposed chip using a standard CMOS process. Our results, achieved on the manufactured device and coupling two matrices, show that our architecture can reach up to 5 Gbit/s while consuming 25pJ/bit, thus demonstrating scalability and performance for any random number generators based on SPADs.

Asia and South Pacific Design Automation Conference (ASP-DAC)•Jan 1, 2014•14 citations
The present work is focused on the description of a SPAD-based pixel suitable for random bits extraction. Compared to the state-of-the-art, the proposed approach aims at improving the performance of the random generator with respect to possible photon flux variation. Thanks to the adopted methodology, the entropy of the output is maintained almost constant over a wide range of operating conditions. The principle has been validated through simulations and implemented in a compact pixel, suitable for array implementation.
A robust true random number generator (TRNG), able to assure high quality output at different working conditions, is an attractive solution in secure communication application, because it increases resilience against possible external attacks. Among different TRNGs, quantum RNGs (QRNG) represent a good candidate for such systems, because of their compactness, low cost and performance [1–6]. They typically consist of a source of photons, such as an attenuated LED, coupled to a detector with single photon capability (SPAD). Many works in the literature have used a single detector [1–4] for random bit extraction. These devices are characterized by a limited bit rate [1], which can be increased by exploiting the arrival time of photons at the cost of circuit and system complexity [2–4]. Recent works [5–6] proposed to implement an array of detectors based on SPAD working in parallel thus extending the speed of QRNG up to 5 Gb/s [5]. Despite the high bit rate, the main drawback of [5] is the strong dependence of each pixel bias on the impinging light intensity which forces the system to work only for a narrow range of photon flux that poses several constraints on the design of the final QRNG system, e.g. the need of a feedback control loop to maintain a constant flux of photons, and of a uniform distribution of light over the entire sensor. Moreover, it is impractical to implement algorithms for bit extraction to all detectors of the array because of different responses and mismatches among SPADs.
A quantum random generator based on photon detection is here presented. The system consists of a source of photons, typically a commercial LED, coupled with a detector with single photon detection capability. The detector in this case is represented by a single pixel consisting of a SPAD and a time stamp circuit, which samples the arrival time of impinging photons within a predefined temporal window. The proposed implementation increases the efficiency of random bit extraction and reduces the afterpulsing probability, which can introduce undesirable correlation to the measurement. Preliminary results are reported, showing that the pixel has a flat behavior for a relevant range of intensity of the light, which makes the pixel robust against variations of external PVT parameters
A compact quantum random number generator (QRNG) based on an array of Single Photon Avalanche Diodes (SPADs) is presented here. The main feature of the proposed chip is the capability to generate random numbers without the use of any external source of light. In this view, SPADs are configured to be used in two ways: 1) as a controlled light emitter and 2) as a detector. An embedded logic is able to distinguish dark events against detected emitted photon in such a way to make the system sensitive only to the presence of light. The extracted random bits show a uniform distribution and the QRNG, thanks to an integrated conditioning block maximizing the output entropy, eventually passes all AIS31 tests. The average raw bit rate in the default device configuration (one enabled column) is measured equal to 800 kbps.
This live demonstration shows a monolithic quantum random number generator (QRNG) fabricated in a 22-nm standard CMOS technology and based on the dark events generated by a Single-Photon Avalanche Diode (SPAD). The random number generator relies on a novel methodology for random bit extraction based on an on-the-fly median estimation of the inter-arrival times between consecutive events. Thanks to this self-adapting mechanism, the quality of the output sequence is kept constant regardless of the working conditions.
SPAD-Based Quantum Random Number Generator With an NthN^{\rm{th}}Nth -Order Rank Algorithm on FPGA
We present a compact, all-solid-state, low-cost quantum random number generator (QRNG) based on a single-photon avalanche diode (SPAD) and a field programmable gate array (FPGA). A new algorithm for random bit generation is described, ranking the inter-arrival times of a group of M photons detected by the SPAD device, and processed directly on the FPGA. The proposed approach improves the efficiency of generated random bits per detected photon, spanning from 0.5 bits/photon in case of 0 order rank, up to 0.875 bits/photon for second order rank. By extending the algorithm to higher orders, the proposed system approaches the maximum theoretical value of 1.0 bit/photon. The rate of generation of random numbers is limited by the SPAD minimum deadtime, achieving an experimentally proven bit rate of 7.3 Mbps. The standard randomness statistical tests are passed for a wide range of photon fluxes and for all the implemented rank orders with no additional post-processing on the generated sequence.
Single-Photon Avalanche Diodes (SPADs) are solid-state photo-detectors capable of detecting single photons by exploiting the avalanche effect that occurs in the breakdown of a p-n junction biased above breakdown voltage. By this effect, a SPAD translates an incoming photon to a macroscopic current pulse. These devices are currently used for building medical devices characterized by a very high time resolution. An appealing application of SPAD is to use them as a basic block for building the entropy source of true random number generators. In this paper we focus on such application, and we explore the design challenges behind the realization of a quantum random number generator based on a massively parallel array of SPADs. The matrix under investigation comprises 512×128 independent cells that convert photons onto a raw bit-stream, which, as ensured by the properties of quantum physics, is characterized by a very high level of randomness. The sequences are read out in a 128-bit parallel bus, concatenated, and pipelined onto a de-biasing filter. Subsequently, we fabricated the proposed chip using a standard CMOS process. Our results, achieved on the manufactured device and coupling two matrices, show that our architecture can reach up to 5 Gbit/s while consuming 25pJ/bit, thus demonstrating scalability and performance for any random number generators based on SPADs.