Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Wireless Communications and Signal Processing (WCSP)

Robust secure switching transmission in MISOSE relaying networks with channel uncertainty

Zhi Lin, Lei Wang, Yueming Cai, Weiwei Yang, Wendong Yang

Published Oct 1, 2015• 1 citation
Publisher

Abstract

In this paper, we investigate the physical layer security of multiple-input single-output single-antenna eavesdropper relaying networks with imperfect channel state information. Different from traditional strategies in relay systems, which would halt the communication if the relay could not decode the signal successfully, we propose a robust secure transmission strategy which switches between cooperative jamming and decoded-and-forward. Our objective is to maximize secrecy rate, given the unavailability of the perfect eavesdropper channel state information, we propose a worst-case robust design based on secrecy rate. In addition, a traditional robust scheme and a non-robust scheme are put forward as benchmarks. Simulation results verify that the proposed scheme based on robust designs can achieve significant security performance gains over other approaches. More interestingly, because of the influence of cooperative jamming, the security performance of non-robust scheme outperforms the traditional robust designs in low transmit power and low channel error coefficient regions.

DOI
10.1109/wcsp.2015.7341319

Related papers

Robust secure switching transmission in multi‐antenna relaying systems: cooperative jamming or decode‐and‐forward beamforming

Zhi Lin, Yueming Cai, Weiwei Yang +1 more

In this study, the authors investigate the physical layer security for safeguarding secure transmission in multi‐antenna relaying networks with imperfect channel state information (CSI). Different from traditional strategies in multi‐antenna relaying systems, which would terminate the communication if the relay could not decode the signals successfully, the authors propose robust secure transmission strategy which switches between cooperative jamming (CJ) and decode‐and‐forward (DF) beamforming. Specifically, if the received signal‐to‐noise ratio at the relay is lower than a predefined threshold, it will impose CJ signals on potential eavesdropper, otherwise the relay would operate DF beamforming. The authors’ objective is to maximise secrecy rate and minimise secrecy outage probability in different practical communication scenarios with relaxed or strict time‐delay constraint. Thus, given the unavailability of the perfect eavesdropping CSI, the authors propose a worst‐case robust design and a statistical‐approach robust design based on secrecy rate and secrecy outage criterion, respectively. In addition, a traditional DF robust scheme and a non‐robust scheme are also considered as benchmarks. Simulation results verify that the proposed scheme significantly outperforms the traditional DF robust scheme and the non‐robust scheme.

IET Communications•May 27, 2016•7 citations

Robust secure transmission with cooperative jamming in hybrid full/half duplex relay network

Zhi Lin, Yueming Cai, Lei Wang

In this paper, considering the worst case channel uncertainty, we propose a robust secure design with cooperative jamming strategy in decode-and-forward relay network. Practically, it is difficult for the full-duplex model to eliminate the self-interference and experience indicates that full-duplex schemes may not always outperform half-duplex schemes. Thus, we employ the hybrid full/half-duplex protocol to reduce the influence of self-interference. Considering imperfect eavesdropping channel condition, we propose a worst-case robust design to obtain jamming weights, which is solved through semi-definite program. Furthermore, we analyze secrecy rate and secrecy outage performance of the proposed scheme. As a benchmark, a traditional full-duplex multi-relay system based on equal-power is proposed for comparison. Simulation results demonstrate that our hybrid strategy with robust design outperforms the traditional full-duplex scheme.

IEEE International Conference on Communication Problem-Solving•Oct 1, 2015•1 citation

Robust secure transmission for cooperative ARQ based on secrecy rate and outage optimization

Zhi Lin, Lei Wang, Xinrong Guan +2 more

Physical layer security is an emerging technique to improve the wireless communication security and the corresponding techniques under practical scenarios especially with imperfect channel state information (CSI) need to be taken into consideration. In this paper, we investigate the robust secure transmission for cooperative decode-and-forward (DF) automatic-repeat-request (ARQ) in multiple-input-single-output (MISO) relaying wiretap channels with channel estimation errors. Firstly, the robust transmit covariance matrices and the optimal beamforming weights are obtained using the semi-definite relaxation (SDR) approach to maximize the secrecy rate under power constraint and channel uncertainties. Besides, we further propose a robust design scheme from the secrecy outage-based characterizations for minimizing the secrecy outage probability of legitimate destination. Moreover, a non-robust scheme, in which the designed beamformer refers to the generalized eigenvectors of the channels' matrix pencil, is also considered as a benchmark. Simulation results verify the robustness of the proposed schemes against the estimation errors and shows that the robust design schemes can significantly improve the security performance of the network.

International Conference on Cyberspace Technology (CCT)•Jan 1, 2014•0 citations

Robust transmit design for secure AF relay networks with imperfect CSI

Lingxiang Li, Yu Xu, Zhi Chen +1 more

This paper studies robust transmit design for secure AF relay networks with imperfect channel state information (CSI). Two CSI error models, deterministically bounded error model and stochastic error model, are considered. In order to use the power at relays more efficiently, a joint cooperative relaying and jamming scheme is considered, where relays cooperate to forward the source signal and simultaneously they cooperate to send jamming signals to confuse the eavesdroppers. In this joint cooperative relaying and jamming framework, we address the robust joint optimization of the relay weights and the input covariance matrix of jamming signals for secrecy rate maximization (SRM), under both total and individual relay power constraints. Specifically, for the case of deterministically bounded error model, where the CSI error can be specified by an uncertainty set, we maximize the worst-case secrecy rate. While for the case of stochastic error model, where the probability distribution of the CSI error is Gaussian, we maximize the outage constrained secrecy rate. The challenge of these considered SRM-based optimizations lies in their non-convexity. This paper shows that such SRM-based optimization can be solved in a convex fashion and via solving a sequence of semidefinite programs (SDPs). Numerical results are presented to show the efficacy of the proposed scheme.

EURASIP Journal on Wireless Communications and Networking•Jun 2, 2016•4 citations

Robust MISO Beamforming With Cooperative Jamming for Secure Transmission From Perspectives of QoS and Secrecy Rate

Hui Ma, Julian Cheng, Xianfu Wang +1 more

Robust quality-of-service (QoS)-based and secrecy rate-based secure transmission designs are investigated for a multiple-input single-output system with multiple eavesdroppers and a cooperative jammer. Two scenarios are considered: (a) eavesdroppers' channel state information (ECSI) is available and (b) ECSI is unavailable. In scenario (a), a QoS-based design is considered to minimize the worst case signal-to-interference-and-noise ratio at the eavesdroppers and to guarantee the QoS of the legitimate receiver. A secrecy rate-based design is also studied where the worst case secrecy rate is maximized. In scenario (b), a QoS-based design is considered to maximize the power of jamming signals under the QoS constraint of the legitimate receiver, and the secrecy rate-based design is not applicable. In all these designs, we jointly optimize the transmit beamforming vector and the covariance matrix of jamming signals under individual power constraints. As the optimization problems are non-convex, we propose an algorithm for each problem through semidefinite relaxation. Our analysis and simulation results show that, even though the linear precoding scheme in our designs is transmit beamforming rather than the general rank transmit covariance, this does not cause any loss of optimality.

IEEE Transactions on Communications•Oct 23, 2017•38 citations

Robust transmit design for secure AF relay networks based on worst-case optimization

Lingxiang Li, Zhi Chen, Jun Fang

This paper studies robust transmit design to maximize the worst-case secrecy rate in AF networks under both total and individual relay power constraints. Channel state information (CSI) in the network is assumed to be perfectly known except for that associated with the eavesdroppers whose imperfection is modeled as deterministic bounded errors. To use the power at the relay nodes more efficiently, a joint cooperative relaying and jamming scheme is considered. Through some matrix manipulations, we recast the original nonconvex optimization problem as a sequence of semidefinite programs (SDPs), which enables us to obtain the optimal relay weights and the optimal covariance matrix of the jamming signal. Numerical results are presented to show the efficacy of the proposed scheme.

IEEE International Conference on Acoustics Speech and Signal Processing•May 1, 2014•8 citations
In this paper, we investigate the physical layer security of multiple-input single-output single-antenna eavesdropper relaying networks with imperfect channel state information. Different from traditional strategies in relay systems, which would halt the communication if the relay could not decode the signal successfully, we propose a robust secure transmission strategy which switches between cooperative jamming and decoded-and-forward. Our objective is to maximize secrecy rate, given the unavailability of the perfect eavesdropper channel state information, we propose a worst-case robust design based on secrecy rate. In addition, a traditional robust scheme and a non-robust scheme are put forward as benchmarks. Simulation results verify that the proposed scheme based on robust designs can achieve significant security performance gains over other approaches. More interestingly, because of the influence of cooperative jamming, the security performance of non-robust scheme outperforms the traditional robust designs in low transmit power and low channel error coefficient regions.
In this study, the authors investigate the physical layer security for safeguarding secure transmission in multi‐antenna relaying networks with imperfect channel state information (CSI). Different from traditional strategies in multi‐antenna relaying systems, which would terminate the communication if the relay could not decode the signals successfully, the authors propose robust secure transmission strategy which switches between cooperative jamming (CJ) and decode‐and‐forward (DF) beamforming. Specifically, if the received signal‐to‐noise ratio at the relay is lower than a predefined threshold, it will impose CJ signals on potential eavesdropper, otherwise the relay would operate DF beamforming. The authors’ objective is to maximise secrecy rate and minimise secrecy outage probability in different practical communication scenarios with relaxed or strict time‐delay constraint. Thus, given the unavailability of the perfect eavesdropping CSI, the authors propose a worst‐case robust design and a statistical‐approach robust design based on secrecy rate and secrecy outage criterion, respectively. In addition, a traditional DF robust scheme and a non‐robust scheme are also considered as benchmarks. Simulation results verify that the proposed scheme significantly outperforms the traditional DF robust scheme and the non‐robust scheme.
In this paper, considering the worst case channel uncertainty, we propose a robust secure design with cooperative jamming strategy in decode-and-forward relay network. Practically, it is difficult for the full-duplex model to eliminate the self-interference and experience indicates that full-duplex schemes may not always outperform half-duplex schemes. Thus, we employ the hybrid full/half-duplex protocol to reduce the influence of self-interference. Considering imperfect eavesdropping channel condition, we propose a worst-case robust design to obtain jamming weights, which is solved through semi-definite program. Furthermore, we analyze secrecy rate and secrecy outage performance of the proposed scheme. As a benchmark, a traditional full-duplex multi-relay system based on equal-power is proposed for comparison. Simulation results demonstrate that our hybrid strategy with robust design outperforms the traditional full-duplex scheme.
Physical layer security is an emerging technique to improve the wireless communication security and the corresponding techniques under practical scenarios especially with imperfect channel state information (CSI) need to be taken into consideration. In this paper, we investigate the robust secure transmission for cooperative decode-and-forward (DF) automatic-repeat-request (ARQ) in multiple-input-single-output (MISO) relaying wiretap channels with channel estimation errors. Firstly, the robust transmit covariance matrices and the optimal beamforming weights are obtained using the semi-definite relaxation (SDR) approach to maximize the secrecy rate under power constraint and channel uncertainties. Besides, we further propose a robust design scheme from the secrecy outage-based characterizations for minimizing the secrecy outage probability of legitimate destination. Moreover, a non-robust scheme, in which the designed beamformer refers to the generalized eigenvectors of the channels' matrix pencil, is also considered as a benchmark. Simulation results verify the robustness of the proposed schemes against the estimation errors and shows that the robust design schemes can significantly improve the security performance of the network.
This paper studies robust transmit design for secure AF relay networks with imperfect channel state information (CSI). Two CSI error models, deterministically bounded error model and stochastic error model, are considered. In order to use the power at relays more efficiently, a joint cooperative relaying and jamming scheme is considered, where relays cooperate to forward the source signal and simultaneously they cooperate to send jamming signals to confuse the eavesdroppers. In this joint cooperative relaying and jamming framework, we address the robust joint optimization of the relay weights and the input covariance matrix of jamming signals for secrecy rate maximization (SRM), under both total and individual relay power constraints. Specifically, for the case of deterministically bounded error model, where the CSI error can be specified by an uncertainty set, we maximize the worst-case secrecy rate. While for the case of stochastic error model, where the probability distribution of the CSI error is Gaussian, we maximize the outage constrained secrecy rate. The challenge of these considered SRM-based optimizations lies in their non-convexity. This paper shows that such SRM-based optimization can be solved in a convex fashion and via solving a sequence of semidefinite programs (SDPs). Numerical results are presented to show the efficacy of the proposed scheme.
Robust quality-of-service (QoS)-based and secrecy rate-based secure transmission designs are investigated for a multiple-input single-output system with multiple eavesdroppers and a cooperative jammer. Two scenarios are considered: (a) eavesdroppers' channel state information (ECSI) is available and (b) ECSI is unavailable. In scenario (a), a QoS-based design is considered to minimize the worst case signal-to-interference-and-noise ratio at the eavesdroppers and to guarantee the QoS of the legitimate receiver. A secrecy rate-based design is also studied where the worst case secrecy rate is maximized. In scenario (b), a QoS-based design is considered to maximize the power of jamming signals under the QoS constraint of the legitimate receiver, and the secrecy rate-based design is not applicable. In all these designs, we jointly optimize the transmit beamforming vector and the covariance matrix of jamming signals under individual power constraints. As the optimization problems are non-convex, we propose an algorithm for each problem through semidefinite relaxation. Our analysis and simulation results show that, even though the linear precoding scheme in our designs is transmit beamforming rather than the general rank transmit covariance, this does not cause any loss of optimality.
This paper studies robust transmit design to maximize the worst-case secrecy rate in AF networks under both total and individual relay power constraints. Channel state information (CSI) in the network is assumed to be perfectly known except for that associated with the eavesdroppers whose imperfection is modeled as deterministic bounded errors. To use the power at the relay nodes more efficiently, a joint cooperative relaying and jamming scheme is considered. Through some matrix manipulations, we recast the original nonconvex optimization problem as a sequence of semidefinite programs (SDPs), which enables us to obtain the optimal relay weights and the optimal covariance matrix of the jamming signal. Numerical results are presented to show the efficacy of the proposed scheme.