Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Experimental Demonstration of Two-Dimensional Spatial Squeezing

Nicolai B. Grosse

Published Jan 1, 2002• 0 citations
OpenAlex

Abstract

This thesis presents the first experimental demonstration of two-dimensional spatial squeezing. A dual squeezer was used to produce two beams of temporally squeezed light. Specially designed wave-plates were required to generate the necessary spatially orthogonal modes. These modes were mixed on an optical cavity to form a multi-mode superposition that converted the original temporal correlations into the desired spatial correlations. We used this light to improve the sensitivity of a two-dimensional beam displacement measurement to below the quantum noise limit. Our setup was also configured to generate a one-dimensional spatially squeezed state of light that did not require either of the two input modes to suffer substantial loss. This was the first experimental demonstration of a proper spatial squeezing measurement.

Related papers

Experimental Demonstration of a Displacement Measurement of an Optical Beam beyond the Quantum Noise Limit

Hengxin Sun, Zunlong Liu, Kui Liu +3 more

We experimentally generate a spatially squeezed light beam and realize a small-displacement measurement beyond the quantum noise limit with this squeezed light. Moreover, we measure about −2.2±0.2 dB spatial squeezing and reduce the minimum measurable displacement from 1.17 Å to 0.99 Å with the signal-to-noise ratio normalized to 1.

Chinese Physics Letters•Aug 1, 2014•15 citations

The birth, life, and death of squeezed light

Christian Drago

In this thesis we study three aspects of squeezed light. First, we investigate the generation of pulsed, near‑pure, degenerate, single‑temporal‑mode squeezed light produced by dual‑pump spontaneous four wave mixing in integrated silicon‑nitride coupled‑ring resonators. We show that parasitic spontaneous four wave mixing processes inherent to the dual‑pump configuration can substantially degrade the amount of generated squeezing and state purity. To mitigate these effects we explore pump detuning, engineered dispersion, and an auxiliary‑ring structure as suppression strategies. We then optimize the incident pump amplitude and phase, demonstrating that longer pump pulses can yield highly squeezed, temporally separable states and that an appropriate pre‑chirp tracks the effects of self‑ and cross‑phase modulation, increasing intracavity pump amplitudes and the amount of generated squeezing. Next, we analyze the spectral–temporal structure and photon statistics of strongly correlated squeezed light. We develop a general formalism based on the Whittaker–Shannon interpolation of the joint‑temporal amplitude that is particularly useful in the long‑pulse and continuous‑wave limits, where the instantaneous photon density is low but the total photon number may be large. This packet‑based description provides a local, physically transparent account of the state and its photon statistics that complements the Schmidt decomposition, and extends to nonclassical states for which a Schmidt decomposition is not available. Finally, we examine whether or not squeezed illumination can enhance two‑photon excitation relative to classical light, and whether any enhancement is experimentally detectable. We construct a model including radiative and nonradiative broadening to compute scattered and absorbed energy, and apply it to fluorescence from cesium atoms in a magneto‑optical trap driven by classical and squeezed light in both continuous‑wave and pulsed regimes. Under ideal conditions squeezed light can produce a measurable enhancement in both limits, but the gains are moderate and smaller than some recent molecular reports; additional broadening or loss would further reduce detectability.

•Jun 1, 2026•0 citations

Single-mode squeezing in arbitrary spatial modes

Marion Semmler, Stefan Berg-Johansen, Vanessa Chille +5 more

As the generation of squeezed states of light has become a standard technique in laboratories, attention is increasingly directed towards adapting the optical parameters of squeezed beams to the specific requirements of individual applications. It is known that imaging, metrology, and quantum information may benefit from using squeezed light with a tailored transverse spatial mode. However, experiments have so far been limited to generating only a few squeezed spatial modes within a given setup. Here, we present the generation of single-mode squeezing in Laguerre-Gauss and Bessel-Gauss modes, as well as an arbitrary intensity pattern, all from a single setup using a spatial light modulator (SLM). The degree of squeezing obtained is limited mainly by the initial squeezing and diffractive losses introduced by the SLM, while no excess noise from the SLM is detectable at the measured sideband. The experiment illustrates the single-mode concept in quantum optics and demonstrates the viability of current SLMs as flexible tools for the spatial reshaping of squeezed light.

arXiv:1601.03961•Optics Express•Mar 31, 2016•16 citations

A Quantum Laser Pointer

Nicolas Treps, Nicolai B. Grosse, Warwick P. Bowen +3 more

The measurement sensitivity of the pointing direction of a laser beam is ultimately limited by the quantum nature of light. To reduce this limit, we have experimentally produced a quantum laser pointer, a beam of light whose direction is measured with a precision greater than that possible for a usual laser beam. The laser pointer is generated by combining three different beams in three orthogonal transverse modes, two of them in a squeezed-vacuum state and one in an intense coherent field. The result provides a demonstration of multichannel spatial squeezing, along with its application to the improvement of beam positioning sensitivity and, more generally, to imaging.

Science•Aug 14, 2003•323 citations

Pulsed squeezed light: characterization and applications

Triginer Garcés, Gil

Squeezed light is expected to enable new quantum metrology and quantum computation applications, but the very high degree of experimental control required in practice places severe demands on the physical devices used to generate it. As ultrafast squeezed light sources are reaching an unprecedented degree of brightness and modal control, there is a strong interest in developing methods for their experimental characterization and theoretical understanding. In this thesis, we demonstrate both a new application and a new characterization technique for pulsed squeezed light. In the first part of the thesis, we present a new metrological application of pulsed squeezed light: quantum-enhanced label-free nonlinear microscopy. Stimulated emission microscopy (SEM) is a state-of-the-art pump-probe microscopy technique whose sensitivity is ultimately limited by shot noise in the probe beam. We propose to overcome this fundamental limitation by using a sub-Poissonian probe generated via optical parametric amplification. We demonstrate an intensity-squeezed sub-picosecond pulsed probe, and a simple stimulated emission microscope. Using this squeezed probe, sub-Poissonian statistics are observed in the SEM signal. After this proof-of-principle experiment, we aim to provide an improved design for a source of intensity-squeezed light. First, we develop a theoretical framework to simulate the photon statistics of a general sub-Poissonian source, considering pulsed and focused pump and seed fields in a unified spatio-temporal description. Next, we use this framework to suggest possible improvements to our previous squeezed probe. In the second part of this thesis, we provide new theoretical and experimental tools to analyze the high gain regime of pulsed spontaneous parametric down-conversion (SPDC). We study a waveguided source capable of generating twin-beams with tens of photons in a single spatio-temporal mode. We develop a framework to efficiently simulate SPDC for an arbitrary nonlinear gain, including the effect of parasitic nonlinearities such as self-phase modulation (SPM) of the pump and cross-phase modulation (XPM) between pump and twin-beams. We experimentally characterize our source using a new technique based on stimulated difference-frequency generation (DFG). In a type-II down-conversion process, we measure the frequency generation produced not only in the orthogonal polarization to the seeding beam, but also in its same polarization, which we interpret as cascaded difference-frequency generation. We argue that the additional information obtained in this measurement allows for a self-referenced estimation of the squeezing gain. Using these measurements, we accurately fit our theoretical model, revealing that, in the high gain regime, parasitic nonlinearities strongly affect the spectral structure of the twin-beams. We propose a simple strategy to reduce the impact of these nonlinearities on the modal structure of SPDC.

•Jan 1, 2019•0 citations

TOWARDS PRACTICAL APPLICATIONS OF TWO MODE SQUEEZED STATES

Umang Jain

Quantum metrology leverages quantum resources to surpass classical limits in measurement sensitivity, enabling new capabilities across fields ranging from fundamental physics to sensing, imaging, and navigation. As these techniques mature, an increasing emphasis is being placed on translating quantum-enhanced performance into practical, robust systems that can operate outside controlled laboratory environments. The overarching objective of the work presented in this dissertation is to develop sensing platforms that achieve improved performance by leveraging quantum resources in realistic, noisy environments. In particular, this work focuses on the use of squeezed states of light, and investigates how two-mode squeezed states generated through four-wave mixing can be developed into compact sources and integrated with practical fiber-optic and plasmonic sensing platforms. Squeezed states of light, and in particular two-mode squeezed states (twin beams), constitute a powerful resource in quantum metrology. Their reduced quantum noise enables measurements below the noise level that can be achieved with classical resources, know as the shot-noise limit, offering genuine quantum advantages in precision sensing and measurement. Beyond their fundamental interest, such states provide a pathway toward practical quantum technologies capable of outperforming classical approaches in real-world applications. For many practical implementations, it is therefore highly advantageous to demonstrate squeezed light sources that are compact, stable, and compatible with existing photonic infrastructures. This is needed to lower the barrier to incorporate quantum resources into experiments and sensing platforms, particularly in environments where bulky or delicate optical setups are impractical. To demonstrate a pathway toward practical quantum sensing with squeezed light, this dissertation presents experimental studies spanning both the development of deployable squeezed-light sources and their application in practical or real-world sensing platforms. We present the development of a compact, narrowband, fiber-coupled source of squeezed light based on four-wave mixing in hot Rb 85 vapor. The system achieves more than 4 dB of intensity-difference squeezing after propagation through polarization-maintaining fibers, demonstrating that strong quantum correlations can be preserved even when fiber coupled. This platform serves as a standalone proof-of-principle demonstration of a deployable, low–size, weight, and power (low-SWaP) squeezed-light source that is well suited for applications where fiber delivery of quantum-correlated light can be readily integrated into existing experimental and sensing platforms. In addition to this source development, the dissertation investigates two distinct applications of twin-beam for quantum-enhanced sensing. The first one focuses on fiber Bragg grating (FBG) sensors, which are widely used to monitor strain, vibration, and temperature in applications ranging from civil infrastructure and aerospace systems to oil and gas pipeline monitoring. By coupling the squeezed light into separate FBGs and employing differential detection, common-mode noise is suppressed while localized perturbations are retained. This work provides a feasibility study for using twin-beams to enhance the sensitivity of FBG-based sensors beyond classical limits while providing robustness against environmental noise. The second application examines plasmonic sensors based on surface plasmon resonances in metallic nanostructures, which enable highly sensitive detection of small changes in refractive index. Such plasmonic sensors are particularly useful for applications in chemical and biological sensing, environmental monitoring, and lab-on-chip platforms, where compactness and high sensitivity to refractive index changes are critical. A dual-probing scheme is introduced in which both beams of a two-mode squeezed state interact with a polarization-dependent plasmonic nanostructure. By exploiting opposite spectral response for orthogonal polarizations, this approach improves measurement sensitivity relative to our previous technique of using one beam to probe the plasmonic sensor and the other to serve as a reference. This new technique takes advantage of transducing information into both the beams while preserving the benefits of differential detection for noise cancellation. Taken together, these studies illustrate complementary approaches for leveraging quantum correlations for practical sensing problems. Through the development of a compact, fiber-compatible squeezed-light source and independent demonstrations of enhanced performance in both fiber-optic and plasmonic sensors, this dissertation advances pathways for translating quantum sensing approaches based on quantum states of light from laboratory demonstrations into deployable metrology tools.

•Jan 1, 2026•0 citations
This thesis presents the first experimental demonstration of two-dimensional spatial squeezing. A dual squeezer was used to produce two beams of temporally squeezed light. Specially designed wave-plates were required to generate the necessary spatially orthogonal modes. These modes were mixed on an optical cavity to form a multi-mode superposition that converted the original temporal correlations into the desired spatial correlations. We used this light to improve the sensitivity of a two-dimensional beam displacement measurement to below the quantum noise limit. Our setup was also configured to generate a one-dimensional spatially squeezed state of light that did not require either of the two input modes to suffer substantial loss. This was the first experimental demonstration of a proper spatial squeezing measurement.
In this thesis we study three aspects of squeezed light. First, we investigate the generation of pulsed, near‑pure, degenerate, single‑temporal‑mode squeezed light produced by dual‑pump spontaneous four wave mixing in integrated silicon‑nitride coupled‑ring resonators. We show that parasitic spontaneous four wave mixing processes inherent to the dual‑pump configuration can substantially degrade the amount of generated squeezing and state purity. To mitigate these effects we explore pump detuning, engineered dispersion, and an auxiliary‑ring structure as suppression strategies. We then optimize the incident pump amplitude and phase, demonstrating that longer pump pulses can yield highly squeezed, temporally separable states and that an appropriate pre‑chirp tracks the effects of self‑ and cross‑phase modulation, increasing intracavity pump amplitudes and the amount of generated squeezing. Next, we analyze the spectral–temporal structure and photon statistics of strongly correlated squeezed light. We develop a general formalism based on the Whittaker–Shannon interpolation of the joint‑temporal amplitude that is particularly useful in the long‑pulse and continuous‑wave limits, where the instantaneous photon density is low but the total photon number may be large. This packet‑based description provides a local, physically transparent account of the state and its photon statistics that complements the Schmidt decomposition, and extends to nonclassical states for which a Schmidt decomposition is not available. Finally, we examine whether or not squeezed illumination can enhance two‑photon excitation relative to classical light, and whether any enhancement is experimentally detectable. We construct a model including radiative and nonradiative broadening to compute scattered and absorbed energy, and apply it to fluorescence from cesium atoms in a magneto‑optical trap driven by classical and squeezed light in both continuous‑wave and pulsed regimes. Under ideal conditions squeezed light can produce a measurable enhancement in both limits, but the gains are moderate and smaller than some recent molecular reports; additional broadening or loss would further reduce detectability.
As the generation of squeezed states of light has become a standard technique in laboratories, attention is increasingly directed towards adapting the optical parameters of squeezed beams to the specific requirements of individual applications. It is known that imaging, metrology, and quantum information may benefit from using squeezed light with a tailored transverse spatial mode. However, experiments have so far been limited to generating only a few squeezed spatial modes within a given setup. Here, we present the generation of single-mode squeezing in Laguerre-Gauss and Bessel-Gauss modes, as well as an arbitrary intensity pattern, all from a single setup using a spatial light modulator (SLM). The degree of squeezing obtained is limited mainly by the initial squeezing and diffractive losses introduced by the SLM, while no excess noise from the SLM is detectable at the measured sideband. The experiment illustrates the single-mode concept in quantum optics and demonstrates the viability of current SLMs as flexible tools for the spatial reshaping of squeezed light.
The measurement sensitivity of the pointing direction of a laser beam is ultimately limited by the quantum nature of light. To reduce this limit, we have experimentally produced a quantum laser pointer, a beam of light whose direction is measured with a precision greater than that possible for a usual laser beam. The laser pointer is generated by combining three different beams in three orthogonal transverse modes, two of them in a squeezed-vacuum state and one in an intense coherent field. The result provides a demonstration of multichannel spatial squeezing, along with its application to the improvement of beam positioning sensitivity and, more generally, to imaging.
Squeezed light is expected to enable new quantum metrology and quantum computation applications, but the very high degree of experimental control required in practice places severe demands on the physical devices used to generate it. As ultrafast squeezed light sources are reaching an unprecedented degree of brightness and modal control, there is a strong interest in developing methods for their experimental characterization and theoretical understanding. In this thesis, we demonstrate both a new application and a new characterization technique for pulsed squeezed light. In the first part of the thesis, we present a new metrological application of pulsed squeezed light: quantum-enhanced label-free nonlinear microscopy. Stimulated emission microscopy (SEM) is a state-of-the-art pump-probe microscopy technique whose sensitivity is ultimately limited by shot noise in the probe beam. We propose to overcome this fundamental limitation by using a sub-Poissonian probe generated via optical parametric amplification. We demonstrate an intensity-squeezed sub-picosecond pulsed probe, and a simple stimulated emission microscope. Using this squeezed probe, sub-Poissonian statistics are observed in the SEM signal. After this proof-of-principle experiment, we aim to provide an improved design for a source of intensity-squeezed light. First, we develop a theoretical framework to simulate the photon statistics of a general sub-Poissonian source, considering pulsed and focused pump and seed fields in a unified spatio-temporal description. Next, we use this framework to suggest possible improvements to our previous squeezed probe. In the second part of this thesis, we provide new theoretical and experimental tools to analyze the high gain regime of pulsed spontaneous parametric down-conversion (SPDC). We study a waveguided source capable of generating twin-beams with tens of photons in a single spatio-temporal mode. We develop a framework to efficiently simulate SPDC for an arbitrary nonlinear gain, including the effect of parasitic nonlinearities such as self-phase modulation (SPM) of the pump and cross-phase modulation (XPM) between pump and twin-beams. We experimentally characterize our source using a new technique based on stimulated difference-frequency generation (DFG). In a type-II down-conversion process, we measure the frequency generation produced not only in the orthogonal polarization to the seeding beam, but also in its same polarization, which we interpret as cascaded difference-frequency generation. We argue that the additional information obtained in this measurement allows for a self-referenced estimation of the squeezing gain. Using these measurements, we accurately fit our theoretical model, revealing that, in the high gain regime, parasitic nonlinearities strongly affect the spectral structure of the twin-beams. We propose a simple strategy to reduce the impact of these nonlinearities on the modal structure of SPDC.
Quantum metrology leverages quantum resources to surpass classical limits in measurement sensitivity, enabling new capabilities across fields ranging from fundamental physics to sensing, imaging, and navigation. As these techniques mature, an increasing emphasis is being placed on translating quantum-enhanced performance into practical, robust systems that can operate outside controlled laboratory environments. The overarching objective of the work presented in this dissertation is to develop sensing platforms that achieve improved performance by leveraging quantum resources in realistic, noisy environments. In particular, this work focuses on the use of squeezed states of light, and investigates how two-mode squeezed states generated through four-wave mixing can be developed into compact sources and integrated with practical fiber-optic and plasmonic sensing platforms. Squeezed states of light, and in particular two-mode squeezed states (twin beams), constitute a powerful resource in quantum metrology. Their reduced quantum noise enables measurements below the noise level that can be achieved with classical resources, know as the shot-noise limit, offering genuine quantum advantages in precision sensing and measurement. Beyond their fundamental interest, such states provide a pathway toward practical quantum technologies capable of outperforming classical approaches in real-world applications. For many practical implementations, it is therefore highly advantageous to demonstrate squeezed light sources that are compact, stable, and compatible with existing photonic infrastructures. This is needed to lower the barrier to incorporate quantum resources into experiments and sensing platforms, particularly in environments where bulky or delicate optical setups are impractical. To demonstrate a pathway toward practical quantum sensing with squeezed light, this dissertation presents experimental studies spanning both the development of deployable squeezed-light sources and their application in practical or real-world sensing platforms. We present the development of a compact, narrowband, fiber-coupled source of squeezed light based on four-wave mixing in hot Rb 85 vapor. The system achieves more than 4 dB of intensity-difference squeezing after propagation through polarization-maintaining fibers, demonstrating that strong quantum correlations can be preserved even when fiber coupled. This platform serves as a standalone proof-of-principle demonstration of a deployable, low–size, weight, and power (low-SWaP) squeezed-light source that is well suited for applications where fiber delivery of quantum-correlated light can be readily integrated into existing experimental and sensing platforms. In addition to this source development, the dissertation investigates two distinct applications of twin-beam for quantum-enhanced sensing. The first one focuses on fiber Bragg grating (FBG) sensors, which are widely used to monitor strain, vibration, and temperature in applications ranging from civil infrastructure and aerospace systems to oil and gas pipeline monitoring. By coupling the squeezed light into separate FBGs and employing differential detection, common-mode noise is suppressed while localized perturbations are retained. This work provides a feasibility study for using twin-beams to enhance the sensitivity of FBG-based sensors beyond classical limits while providing robustness against environmental noise. The second application examines plasmonic sensors based on surface plasmon resonances in metallic nanostructures, which enable highly sensitive detection of small changes in refractive index. Such plasmonic sensors are particularly useful for applications in chemical and biological sensing, environmental monitoring, and lab-on-chip platforms, where compactness and high sensitivity to refractive index changes are critical. A dual-probing scheme is introduced in which both beams of a two-mode squeezed state interact with a polarization-dependent plasmonic nanostructure. By exploiting opposite spectral response for orthogonal polarizations, this approach improves measurement sensitivity relative to our previous technique of using one beam to probe the plasmonic sensor and the other to serve as a reference. This new technique takes advantage of transducing information into both the beams while preserving the benefits of differential detection for noise cancellation. Taken together, these studies illustrate complementary approaches for leveraging quantum correlations for practical sensing problems. Through the development of a compact, fiber-compatible squeezed-light source and independent demonstrations of enhanced performance in both fiber-optic and plasmonic sensors, this dissertation advances pathways for translating quantum sensing approaches based on quantum states of light from laboratory demonstrations into deployable metrology tools.