In this thesis we use optimal control theory to control a BoseEinstein condensate. We focus on an experiment conducted at the Vienna University of Technology where a Bose-Einstein condensate is produced and trapped on an atom chip, and two entangled matter waves are produced. Such a twin atom beam has many technical applications and is necessary for matter wave interferometry, for example. One critical step in this experiment is the excitation of the condensate, which is achieved by displacing the minimum of the confinement potential (“shaking”). In order to find a time dependent potential that excites the condensate, optimal control theory is necessary and able to produce satisfying results. However, theoretical predictions and experimental data do not match perfectly. This is mainly due to the impulse response filter, causing a difference between the calculated and the experimentally accessible control field. To solve this problem in this thesis, we incorporate the effect of this impulse response filter in the optimal control algorithm. The new system is then not local in time anymore and there are new boundary conditions to meet. These problems are overcome and the obtained control fields are much closer to the experiment than without considering the effects of the impulse response filter. It is even possible to find working control fields with a transition time of only two milliseconds or to transfer the condensate in a higher excited state.
In this thesis we use optimal control theory to control a BoseEinstein condensate. We focus on an experiment conducted at the Vienna University of Technology where a Bose-Einstein condensate is produced and trapped on an atom chip, and two entangled matter waves are produced. Such a twin atom beam has many technical applications and is necessary for matter wave interferometry, for example. One critical step in this experiment is the excitation of the condensate, which is achieved by displacing the minimum of the confinement potential (“shaking”). In order to find a time dependent potential that excites the condensate, optimal control theory is necessary and able to produce satisfying results. However, theoretical predictions and experimental data do not match perfectly. This is mainly due to the impulse response filter, causing a difference between the calculated and the experimentally accessible control field. To solve this problem in this thesis, we incorporate the effect of this impulse response filter in the optimal control algorithm. The new system is then not local in time anymore and there are new boundary conditions to meet. These problems are overcome and the obtained control fields are much closer to the experiment than without considering the effects of the impulse response filter. It is even possible to find working control fields with a transition time of only two milliseconds or to transfer the condensate in a higher excited state.
This thesis develops a numerical optimal-control framework for investigating the manipulation of one-dimensional Bose–Einstein condensates governed by the Gross–Pitaevskii equation. The control problem is formulated as a constrained optimization problem in which time-dependent external potentials are optimized to steer condensate dynamics while minimizing unwanted excitations.The first part considers the compression of a condensate containing a darksoliton confined in a box potential. Optimal trajectories of the trap boundaries are obtained that preserve the solitonic structure while strongly reducing den-sity and phase excitations compared with conventional linear protocols. Thesecond part addresses the opposite problem of soliton absorption. By optimizing the motion of the trapping boundaries, moving gray solitons can be efficiently removed and the condensate driven toward its ground state. The third part investigates the merging of two condensates separated by a potential barrier. Optimal barrier-removal protocols are computed for different initialphase differences between the condensates. The dependence of the optimal control strategy on the phase mismatch is analyzed, including the formation of adark soliton in the case of a PI phase difference and the construction of robustprotocols applicable when the phase difference is unknown.Finally, the optimal-control framework is extended to tunnel-coupled con-densates. The coupled Gross–Pitaevskii equations are formulated as a con-strained optimization problem, and the corresponding adjoint equations arederived. This framework provides the foundation for future investigations of optimal control in coupled condensate systems.Together, these results demonstrate how optimal control can be used both to preserve and to manipulate nonlinear excitations and phase structures in Bose–Einstein condensates, providing tools for quantum-state engineering inultracold atomic systems.
In this paper we study the fast adiabatic-like expansion of a one-dimensional Bose-Einstein condensate (BEC) confined in a harmonic potential, using the theory of time-optimal control. We find that under reasonable assumptions suggested by the experimental setup, the minimum-time expansion occurs when the frequency of the potential changes in a bang-bang form between the permitted values. We calculate the necessary expansion time and show that it scales logarithmically with large values of the expansion factor. This work is expected to find applications in areas where the efficient manipulations of BEC is of utmost importance. As an example we present the field of atom interferometry with BEC, where the wavelike properties of atoms are used to perform interference experiments that measure with unprecedented precision small shifts induced by phenomena like rotation, acceleration, and gravity gradients.
Bose-Einstein condensates (BECs), a quantum state of matter formed when bosonic atoms are cooled close to absolute zero, have become the premier platform for investigating fundamental physics with atomic vapours. Experiments on Bose-Einstein condensates now achieve exquisite control over many aspects of the system, including interactions, trapping potential, and dynamics. This has precipitated a new wave of research into many-body quantum phenomena and, in particular, solitons. These structures are fundamental excitations of an interacting non-linear medium, of interest to a multitude of scientific disciplines from non-linear optics to financial markets. The highly controllable environment of BECs form an attractive playground for the study of solitons allowing the non-linearity to be dynamically tuned, facilitating deeper investigations into these structures. Consistently generating and analysing solitons in BEC experiments continues to be problematic. In particular, the non-linear dynamics of BECs, though required for the generation of solitons, produce particularly challenging control and optimization problems. These control problems must be solved before further investigations into the fundamental physics of soliton dynamics can be answered. This thesis makes three important advances in the control and measurement of BECs that will lead to better generation and observation of solitons. (1) a theoretical model for a control scheme capable of highly precise wavefunction engineering, (2) the experimental implementation of a machine learning algorithm for online optimisation, and (3) a continuous non-destructive imaging system capable of directly observing soliton dynamics in real-time. Together, these advances provide a suite of tools for manipulating and exploiting solitons in Bose-Einstein condensates. A novel technique was developed theoretically, offering control of the macroscopic wavefunction of a Bose-Einstein condensate with unprecedented spatial resolution and speed. The ability to control the atomic wavefunction at the fundamental length scale is key to the advancement of many quantum technologies such as quantum simulators. The magnetic resonance control scheme is demonstrated through simulation of a 87Rb condensate with the exemplar model generating a single dark soliton with corresponding π phase kink. The soliton represents a structure at the fundamental length scale of the system, and demonstrates the potential of the scheme for precision state engineering. The scheme is extended to generate higher-order soliton modes which are yet to be experimentally realised. A machine learning algorithm based on Gaussian processes was developed and implemented on the evaporative cooling stage of the production of a 87Rb Bose-Einstein condensate, successfully demonstrating fast optimisation to condensation. The Gaussian process develops a statistical model based on the data that enables the characterisation of the relationship between the experimental controls and resultant quality of the BEC. This relationship is often obfuscated through technical details of the apparatus, frustrating the use of theoretical models to design optimal evaporation ramps. These models often only consider ergodic dynamics with two-body s-wave interactions and no other loss rates with better ramps likely exploiting more complex interactions. The internal model generated from the Gaussian process utilised uncertainty in measured data, making the optimisation more robust to experimental noise than alternate methods. The algorithm is shown to produce high quality Bose-Einstein condensates in 10 times fewer experimental iterations than previously used online optimisation techniques. By exploiting information on the sensitivity of each control, the model can be used to aid experimental design. The convergence of the optimisation is further improved by eliminating a superfluous parameter identified by the model. The general usefulness of machine learning compared with bespoke optimisation algorithms has seen machine learning approach ubiquity. Finally, an experimentally straightforward technique for continuous non-destructive imaging of matter-wave solitons was developed and implemented, facilitating measurements of stochastic phenomena. The technique is readily practicable on any ultracold atom experiment with an existing absorption imaging system, simply requiring the probe laser be far-detuned from resonance. With a signal-to-noise of ∼ 33 at 1.25 GHz detuning, the technique is capable of producing 100 images with no observable heating or atom loss. Coupled with a fast optical phase locked loop, the technique can be used in conjunction with absorption imaging to generate a series of non-destructive images followed by a final high signal-to-noise absorption image solely through moving the laser on resonance for the final image. The high performance and utility of this imaging setup make it a powerful tool for ultra-cold atom experiments.
The control of the transport of Bose–Einstein condensates in magnetic microtraps is formulated within the framework of optimal control theory and solved by multigrid optimization schemes. The time evolution of the wave function of Bose–Einstein condensates is governed by the Gross–Pitaevskii equation and can be manipulated through variation of a controllable magnetic confinement potential. In order to define an optimal control strategy, an appropriate cost functional is introduced that must be minimized under the constraint given by the dynamic equation. The resulting optimality system consists of two nonlinear Schrödinger-type equations with opposite time orientation coupled with an elliptic equation for the control function. These equations are approximated by using a time-splitting pseudospectral method and finite differences. To solve the resulting problem a cascadic nonlinear conjugate gradient scheme and a multigrid optimization scheme are considered. The convergence properties of these two schemes are investigated theoretically, and their computational performance is discussed based on results of numerical experiments. It appears that the multigrid optimization scheme provides a robust optimization strategy.
In this thesis a number of aspects on possible manipulation of Bose-Einstein condensate in trapped atomic gases is investigated. First, a model for atom optical experiments involving Bose condensates is proposed and numerical simulations are presented to illustrate its characteristics. We demonstrate ways of focusing and splitting the condensate by modifying experimentally adjustable parameters. We show that there are at least two ways of implementing atom optical elements: one may modulate the interatomic scattering length in space, or alternatively, use a sinusoidal, externally applied potential. The temporal evolution of quasiparticle excitations is studied via the Gross-Pitaevskii Equation. Nonlinear mode mixing of quasiparticles is introduced, and is observed using a quasiparticle projection method. This is used as a basis of time-dependent finite temperature simulations, which we argue to be valid under regimes of high occupation number. An illustration via a closely related evaporative cooling simulation is provided. A phenomenological damping formalism for superfluidity near the λ point is adopted to describe the damping of excitations in a Bose-Einstein condensate. An estimate for the damping parameter is found. The damping formalism as a numerical tool to calculate the ground eigenstate of the condensate is explored. A novel, experimentally realisable interferometry for Bose-Einstein condensates using near-field diffraction is proposed. The scheme is based on the phenomenon of intermode traces or quantum carpets; we demonstrate the structured spatio-temporal pattern for the dilute, atomic Bose-Einstein condensate. The pattern is found to change with temperature, which allows us to perform interferometric temperature measurements. Finally, an output coupler for Bose-Einstein Condensates based on stimulated Raman transition is investigated. The spectrum and coherence are calculated for an atomic beam slowly coupled out of a trap containing a partially condensed Bose gas at finite temperatures. A number conserving Hartree-Fock-Bogliubov formalism has been used to incorporate finite temperature effects. Various different processes are found to become dominant for a suitable choice of the coupling parameters.
An atom interferometer is a sensitive device that has potential for many useful applications. Atoms are sensitive to electromagnetic fields due to their electric and magnetic moments and their mass allows them to be deflected in a gravitational field, thereby making them attractive for measuring inertial forces. The narrow momentum distribution of Bose-Einstein condensate (BEC) is a great asset in realizing portable atom interferometers. An example is a guided-wave atom interferometer that uses a confining potential to guide the motion of the condensate. Despite the promise of guided-wave atom interferometry with BEC, spatial phase and phase diffusion limit the contrast of the interference fringes. The control of these phases is required for successful development of a BEC-based guided-wave atom interferometer. This thesis analyses the guided-wave atom interferometer, where an atomic BEC cloud at the center of a confining potential is split into two clouds that move along different arms of the interferometer. The clouds accumulate relative phase due to the environment, spatially inhomogeneous trapping potential and atom-atom interactions within the condensate. At the end of the interferometric cycle, the clouds are recombined producing a cloud at rest and moving clouds. The number of atoms in the clouds that emerge depends on the relative phase accumulated by the clouds during propagation. This is investigated by deriving an expression for the probability of finding any given number of atoms in the clouds that emerge after recombination. Characteristic features like mean, standard deviation and cross-correlation function of the probability density distribution are calculated and the contrast of the interference fringes is optimized. This thesis found that optimum contrast is achieved through the control of total population of atoms in the condensate, trap frequencies, s-wave scattering length, and the duration of the interferometric cycle.