Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Annual Review of Physical Chemistry

Hole-Burning Spectroscopy

Silvia Volker

Published Jan 1, 1989• 230 citations
Publisher

Abstract

The study of optical relaxation processes in solids at low temperature has progressed tremendously in the last 20 years due to the development of coherent optical techniques. The latter would not have been possible without the advent of narrow-band tunable lasers, on the one hand, and lasers with very short pulses (picoseconds, femtosecoods) on the other hand. Such coherent techniques are necessary because spectral line shapes of solids doped with guest molecules are seldom determined by dynamical interactions but principally by strain or structural disorder. This gives rise to inhomogeneous broadening, rlOh, which in crystalline hosts at low temperature varies between ' 0.1 and 10 cm -I, whereas in glasses it may amount to � 100-500 em-I. One of the techniques to achieve narrowing of spectral lines is site­ selection spectroscopy (1-3). A sub-ensemble of molecules within thc inhomogeneously broadened absorption band is selectively excited by mcans of a narrow-band laser, and the fluorescence or phosphoresccnce signal is detected with a high-resolution monochromator and/or a Fabry­ Perot interferometer. Fluorescence line-narrowing ( I) is a special case of this technique (for a review see 3). The intrinsic or homogeneous spectral linewidth, r hom, which yields information on the relaxation processes of the excited state, is given by the effective optical dephasing time, T2:

DOI
10.1146/annurev.pc.40.100189.002435

Related papers

Structure and Dynamics in Solids As Probed by Optical Spectroscopy

James L. Skinner, W. E. Moerner

Optical spectroscopy provides a useful tool for probing the structure and dynamics of solids. Over the years, optical methods have evolved from absorption spectroscopy to more complex methods such as spectral hole burning, photon echoes, and luminescence line narrowing. The absorption spectrum provides information about inhomogeneous broadening, while the latter approaches provide information about the systematics of the homogeneous line shape information that is often obscured by inhomogeneous broadening. When external perturbations such as strain or electric fields are applied, details of the local site can be obtained. Recently, the ultimate limit of optical spectroscopy has been attained, in which the spectral properties of individual single impurity molecules in a solid can be measured, with all ensemble averaging removed. This novel regime has provided additional, previously unobtainable, information on a highly local scale, such as the direct observation of the spectral shifting of a single molecule produced by configurational transitions of the host. It is to be expected that further surprises await us in this new frontier of single-molecule spectroscopy in solids.

The Journal of Physical Chemistry•Jan 1, 1996•124 citations

Spectral Hole Burning: Data Storage and Processing

Urs P. Wild, Eric S. Maniloff, Stefan Bernet +1 more

At very low temperatures, the spread in the different environments of matrix embedded dye molecules results in an inhomogeneously broadened S1 ← S0 band. Spectroscopic techniques based on the appearence of optical zero phonon lines, such as fluorescence line narrowing, spectral hole-burning, and single molecule spectroscopy provide an experimental resolution limited by the homogeneous linewidth. From the investigation of the homogeneous line width as a function of different parameters (time, temperature) information on the guest host interactions responsible for the observed linewidth is obtained. Spectrally narrow features are extremely sensitive probes for external perturbations, such as electric fields, magnetic fields, or hydrostatic pressure.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1994•0 citations

Materials for spectral hole-burning storage

W. E. Moerner

One very exciting application of laser spectroscopy would be to use the high-resolution capabilities of today’s lasers and the phenomenon of persistent spectral hole-burning to form a frequency domain optical storage system.1 In such a system, bits of information would be stored by locally modifying (in the frequency domain) the shape of an inhomogeneously broadened absorption line of an absorber in a solid at low temperatures. Because typical homogeneous widths are 1000X (or more) narrower than typical inhomogeneous widths, as many as 1000 bits could be written in one diffraction-limited 1-μm spot In a sample, yielding the impressive storage density of 1011 bits/cm2.

Conference on Lasers and Electro-Optics•Jan 1, 1983•1 citation

Laser Hole Burning Spectroscopy: A High Resolution Probe of Molecular Environments.

R. M. Macfarlane, Robert M. Shelby

Laser induced hole burning in optical absorption bands of low temperature solids has been investigated with emphasis on mechanisms for population hole burning, the interactions with the environment which limit the hole widths and the use of hole burning for ultra high resolution spectroscopy. Hole burning was observed in a wide range of solids including organic and organometallic molecules in crystals and rare earth ions in crystals and glasses. The mechanisms for hole burning also varied widely and a new mechanism involving optically induced nuclear spin flips of near neighbor nuclei was discovered. Examples of hole burning in new classes of materials are presented here for the first time, namely inorganic glasses (silicate glasses containing Nd(3+), Pr(3+) or Eu(3+)) and undoped stoichiometric compounds (e.g., EuP5O14). Hole recovery was used to determine nuclear spin lattice relaxation rates in praseodymium doped crystals. For allowed optical transitions (e.g., singlet states of zinc porphyrin, dibromoindigo and color centers in alkali halides) the hole widths at 2K are limited by population decay to approximately 50 MHz. For longer lived optical levels in crystalline materials, e.g., those containing rare earth ions, the hole widths are narrower (less than 10 MHz) and are limited by dynamical interactions with surrounding nuclei. In amorphous materials such as europium doped silicate glass, hole widths are much broader, being limited by low frequency tunneling motions. Hole burning measurements were complemented by time domain coherent transient (photon echo, and optical free decay) measurements of homogeneous linewidths which enabled us to measure optical resonances as narrow as 760 Hz in Eu(3+):Y2O3.

Final Report•Jun 1, 1981•0 citations

Molecular Computing

Urs P. Wild, Alois Renn

Each dye molecule embedded in an amorphous material such as a a polymer host experiences a specific molecular environment which strongly influences its electronic transition energies. At low temperatures the different microenvironments result in an inhomogeneously broadened absorption band. The invention of the laser brought new spectroscopic techniques based on energy selection, such as fluorescence line narrowing and spectral hole-burning [1]. These techniques enable convenient addressing of thousands of molecular subsets selected by their transition energy.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1991•0 citations

Optical spectroscopy using a solid as a single-molecule trap

W. E. Moerner, Th. Basché, Michel Orrit

As was recently demonstrated1 by using highly efficient fluorescence excitation spcctroscopy with N.A. = 0.98 collection optics, single impurity molecules in both crystals and polymers may now be detected with single-to-noiseratios (SNRs) as high as 30 in a 1 Hz bandwidth at low temperatures. In essence, the solid may be regarded as a trap for the single molecule, which effectively quenches rotation. Our measurements include precise determination of the lifetime limited linewidth and the temperature dependence of the optical dephasing, as well as spectral diffusion (wandering in frequency space due to perturbations by lattice degrees of freedom). For the polymeric host, light-induced changes in resonant frequency of a single molecule can be produced, a process that is normally termed spectral hole-burning when large ensembles of molecules are probed. In recent studies, nonclassical light emission from a single molecule (photon antibunching) has been observed in a fashion analogous to that reported earlier for a single atom in a trap.

Annual Meeting Optical Society of America•Jan 1, 1992•0 citations
The study of optical relaxation processes in solids at low temperature has progressed tremendously in the last 20 years due to the development of coherent optical techniques. The latter would not have been possible without the advent of narrow-band tunable lasers, on the one hand, and lasers with very short pulses (picoseconds, femtosecoods) on the other hand. Such coherent techniques are necessary because spectral line shapes of solids doped with guest molecules are seldom determined by dynamical interactions but principally by strain or structural disorder. This gives rise to inhomogeneous broadening, rlOh, which in crystalline hosts at low temperature varies between ' 0.1 and 10 cm -I, whereas in glasses it may amount to � 100-500 em-I. One of the techniques to achieve narrowing of spectral lines is site­ selection spectroscopy (1-3). A sub-ensemble of molecules within thc inhomogeneously broadened absorption band is selectively excited by mcans of a narrow-band laser, and the fluorescence or phosphoresccnce signal is detected with a high-resolution monochromator and/or a Fabry­ Perot interferometer. Fluorescence line-narrowing ( I) is a special case of this technique (for a review see 3). The intrinsic or homogeneous spectral linewidth, r hom, which yields information on the relaxation processes of the excited state, is given by the effective optical dephasing time, T2:
Optical spectroscopy provides a useful tool for probing the structure and dynamics of solids. Over the years, optical methods have evolved from absorption spectroscopy to more complex methods such as spectral hole burning, photon echoes, and luminescence line narrowing. The absorption spectrum provides information about inhomogeneous broadening, while the latter approaches provide information about the systematics of the homogeneous line shape information that is often obscured by inhomogeneous broadening. When external perturbations such as strain or electric fields are applied, details of the local site can be obtained. Recently, the ultimate limit of optical spectroscopy has been attained, in which the spectral properties of individual single impurity molecules in a solid can be measured, with all ensemble averaging removed. This novel regime has provided additional, previously unobtainable, information on a highly local scale, such as the direct observation of the spectral shifting of a single molecule produced by configurational transitions of the host. It is to be expected that further surprises await us in this new frontier of single-molecule spectroscopy in solids.
At very low temperatures, the spread in the different environments of matrix embedded dye molecules results in an inhomogeneously broadened S1 ← S0 band. Spectroscopic techniques based on the appearence of optical zero phonon lines, such as fluorescence line narrowing, spectral hole-burning, and single molecule spectroscopy provide an experimental resolution limited by the homogeneous linewidth. From the investigation of the homogeneous line width as a function of different parameters (time, temperature) information on the guest host interactions responsible for the observed linewidth is obtained. Spectrally narrow features are extremely sensitive probes for external perturbations, such as electric fields, magnetic fields, or hydrostatic pressure.
One very exciting application of laser spectroscopy would be to use the high-resolution capabilities of today’s lasers and the phenomenon of persistent spectral hole-burning to form a frequency domain optical storage system.1 In such a system, bits of information would be stored by locally modifying (in the frequency domain) the shape of an inhomogeneously broadened absorption line of an absorber in a solid at low temperatures. Because typical homogeneous widths are 1000X (or more) narrower than typical inhomogeneous widths, as many as 1000 bits could be written in one diffraction-limited 1-μm spot In a sample, yielding the impressive storage density of 1011 bits/cm2.
Laser induced hole burning in optical absorption bands of low temperature solids has been investigated with emphasis on mechanisms for population hole burning, the interactions with the environment which limit the hole widths and the use of hole burning for ultra high resolution spectroscopy. Hole burning was observed in a wide range of solids including organic and organometallic molecules in crystals and rare earth ions in crystals and glasses. The mechanisms for hole burning also varied widely and a new mechanism involving optically induced nuclear spin flips of near neighbor nuclei was discovered. Examples of hole burning in new classes of materials are presented here for the first time, namely inorganic glasses (silicate glasses containing Nd(3+), Pr(3+) or Eu(3+)) and undoped stoichiometric compounds (e.g., EuP5O14). Hole recovery was used to determine nuclear spin lattice relaxation rates in praseodymium doped crystals. For allowed optical transitions (e.g., singlet states of zinc porphyrin, dibromoindigo and color centers in alkali halides) the hole widths at 2K are limited by population decay to approximately 50 MHz. For longer lived optical levels in crystalline materials, e.g., those containing rare earth ions, the hole widths are narrower (less than 10 MHz) and are limited by dynamical interactions with surrounding nuclei. In amorphous materials such as europium doped silicate glass, hole widths are much broader, being limited by low frequency tunneling motions. Hole burning measurements were complemented by time domain coherent transient (photon echo, and optical free decay) measurements of homogeneous linewidths which enabled us to measure optical resonances as narrow as 760 Hz in Eu(3+):Y2O3.
Each dye molecule embedded in an amorphous material such as a a polymer host experiences a specific molecular environment which strongly influences its electronic transition energies. At low temperatures the different microenvironments result in an inhomogeneously broadened absorption band. The invention of the laser brought new spectroscopic techniques based on energy selection, such as fluorescence line narrowing and spectral hole-burning [1]. These techniques enable convenient addressing of thousands of molecular subsets selected by their transition energy.
As was recently demonstrated1 by using highly efficient fluorescence excitation spcctroscopy with N.A. = 0.98 collection optics, single impurity molecules in both crystals and polymers may now be detected with single-to-noiseratios (SNRs) as high as 30 in a 1 Hz bandwidth at low temperatures. In essence, the solid may be regarded as a trap for the single molecule, which effectively quenches rotation. Our measurements include precise determination of the lifetime limited linewidth and the temperature dependence of the optical dephasing, as well as spectral diffusion (wandering in frequency space due to perturbations by lattice degrees of freedom). For the polymeric host, light-induced changes in resonant frequency of a single molecule can be produced, a process that is normally termed spectral hole-burning when large ensembles of molecules are probed. In recent studies, nonclassical light emission from a single molecule (photon antibunching) has been observed in a fashion analogous to that reported earlier for a single atom in a trap.