We report progress in our project on Integrated Atom Optics. We are exploring methods of producing surface-based microscopic atom optical elements that are made from permanent magnetic films and current-carrying microwires. We will discuss different configurations of microtraps, waveguides and couplers that can manipulate atomic de Broglie waves on the surface of a substrate. In particular we will describe the characteristics of a mirror magneto-optical trap that has allowed trapping of rubidium atoms in vicinity of a surface.
We have realized a scheme for continuous loading of a magnetic trap (MT).
52Cr atoms are continuously captured and cooled in a magneto-optical trap (MOT). Optical pumping to a metastable state decouples atoms from the cooling light. Due to their high magnetic moment $(6 {\ensuremath{\mu}}_{B}),$ low-field seeking metastable atoms are trapped in the magnetic quadrupole field provided by the MOT. Limited by inelastic collisions between atoms in the MOT and in the MT, we load
108 metastable atoms at a rate of
108 atoms/s below $100 \ensuremath{\mu}\mathrm{K}$ into the MT. Optical repumping after the loading allows us to realize a MT of ground-state chromium atoms.
Bose-Einstein condensation has been achieved in a magnetic surface microtrap with 4 x 10(5) (87)Rb atoms. The strongly anisotropic trapping potential is generated by a microstructure which consists of microfabricated linear copper conductor of widths ranging from 3 to 30 microm. After loading a high number of atoms from a pulsed thermal source directly into a magneto-optical trap the magnetically stored atoms are transferred into the microtrap by adiabatic transformation of the trapping potential. In the microtrap the atoms are cooled to condensation using forced rf-evaporation. The complete in vacuo trap design is compatible with ultrahigh vacuum below 2 x 10(-11) mbar.
A novel kind of magnetic microtrap is demonstrated for ultracold neutral atoms. It consists of two concentric loops of radii
r1 and
r2 having oppositely oriented currents. A magnetic field minimum is generated in three dimensions that can be used to trap the atoms with a trap depth of about 1 mK using a current of 2.6 A. The condition
r2/r1 = 2.2 maximizes the restoring force on the atoms toward the trap center. Unlike conventional magnetic microtraps, an external bias field is not required. Moreover, a one dimensional array of double-loop microtraps can be created by daisy chaining single microtrap circuits. \nA linear array of three microtraps having
r1 = 300
mum was fabricated as part of an atom chip. The following three techniques were developed to load the microtrap array: 1) atoms initially contained in a magneto-optical trap (MOT) were transported to the atom chip by a conventional magnetic trap, 2) atoms were first loaded into a mirror MOT and 3) atoms were initially loaded in a far off resonance optical dipole trap (FORT). Each technique loaded greater than
105 87Rb atoms into the microtrap array. The lowest temperature of 30
muK for the microtrapped atom cloud was achieved using FORT loading. The strength and the position of the microtrap could be precisely adjusted over a range from 300 to 50
mum above the atom chip surface by applying an external bias magnetic field. The lifetime of the atoms trapped in the microtrap array was measured to be 350 ms which was limited by the collisions with residual background gas.