Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum Electronics and Laser Science Conference

Temperature dependence of the adsorption time of cesium atoms on a glass surface

H.N. de Freitas, P. Chaves de Souza Segundo, Orlando Di Lorenzo, Daniel Bloch, Martine Chevrollier, Marcos Oriá

Published Nov 13, 2002• 0 citations
Publisher

Abstract

Summary form only given. Reflection spectroscopy at a dielectric/atomic vapor interface allows one to study the properties of atoms close to a surface, within a depth of the order of the optical wavelength. We report on the use of evanescent wave spectroscopy to determine the temperature dependence of the adsorption time of Cs atoms on the pyrex window of an ordinary optical cell. Saturated absorption (SA) spectroscopy in a vapor is known to be a velocity selective technique, yielding Doppler-free spectra. In the presence of velocity changing collisions, SA spectroscopy can also provide information on the velocity redistribution (the collision kernel) provided that the pumping effect has not been totally washed out in the course of the collisional process.

DOI
10.1109/qels.2001.962042

Related papers

Nonlinear Doppler-free spectroscopy of atoms near a surface

Pierre Simoneau, S. Le Boiteux, C. De Araujo +2 more

Up to now, Doppler-free nonlinear spectroscopy has been applied to atoms inside a gas medium (volume spectroscopy). We have extended these methods to atoms in the vicinity of a surface. The basic principle consists of monitoring reflectivity changes produced when a laser beam, incident on a glass–vapor interface, is brought into resonance with an atomic transition. For Doppler-free spectroscopy, two counterpropagating beams are used to operate velocity selection. If these two beams are under normal incidence in the glass—velocity selection perpendicular to the surface—one observes saturated dispersion (selective reflection sensitive to the real index). For incidence angles in the glass (prism) larger than the critical angle (total internal reflection), a standing evanescent wave is produced in the gas (velocity selection along the surface), and saturated absorption is detected. Experimental demonstration was performed on the Na resonance line; high sensitivity (10−4 relative reflectivity change) and spectral resolution as good as 20 MHz were obtained. The main limitation to better resolution comes from the short atomic transit time in the evanescent wave (typical extension ~λ). Relevant applications of these techniques should also concern the diagnostics of optically thick media, as analysis of interaction between gas-phase atoms and the surface, notably atom–wall collisions, and modification of the spontaneous emission characteristics.

International Laser Science Conference•Jan 1, 1986•0 citations

Laser-controlled adsorption of Na atoms in evanescent wave spectroscopy

Vladimir G Bordo, Horst‐Günter Rubahn

A new spectroscopic technique for studying adsorption of atoms at a transparent dielectric surface is exploited. A quantitative comparison of the Autler-Townes splitting in measured and calculated, surface temperature-dependent two-photon evanescent wave spectra provides values of the adsorption energy, the preexponential factor for the rate of desorption and the polarizability of alkali atoms, adsorbed on a glass surface. It is speculated that this technique could form the basis for future two-photon control of atoms close to dielectric surfaces.

Optics Express•Jan 18, 1999•8 citations

High resolution selective reflection spectroscopy as a probe of long-range surface interaction : measurement of the surface van der Waals attraction exerted on excited Cs atoms

Martine Chevrollier, Mich�le Fichet, Marcos Oriá +3 more

Selective reflection spectroscopy at an interface with a low-density resonant vapor, especially when combined with a frequency modulation technique, is a high-resolution Doppler-free tool for probing atoms interacting with a surface. We analyze different types of relevant surface interaction, emphasizing the spectral consequences of a van der Waals surface attraction associated to a $z^{-3}$ potential dependence ($z$: distance to the wall). We present detailed results of two series of experiments at a Cs vapor/dielectric window interface on the 6S$_{1/2}$-6P$_{3/2}$ ($\lambda = 852$ nm) resonance line and on the 6S$_{1/2}$-7P second resonance line ($\lambda = 455$ nm and 459 nm). Lineshape analysis at various pressures consistently shows that a van der Waals-type surface attraction has to be considered to interpret strong lineshape distortions and resonance shift. The attractive strengths are found to be equal respectively to $\approx 2$ kHz $\mu$m$^3$ and $\approx 20$ kHz $\mu$m$^3$, independently of the considered hyperfine component, within the experimental accuracy. It yields also typical parameters of pressure broadening and shift, which are shown to originate in collisional processes, at densities where the medium is opaque. Theoretical expectations for the VW strength are discussed on the basis of the results of atomic theory. The predicted values are smaller, by a typical factor of 2, than those deduced from the experiments. The validity of the theory, when applied to a dielectric interface, is discussed and seems questionable when the frequency of virtual atomic transitions involved in the van der Waals attraction potential lies in the dielectric window absorption range.

Journal de Physique II•Apr 1, 1992•94 citations

Selective reflection Casimir-Polder spectroscopy in vapor cells: The influence of the thermal velocity distribution

B. Dutta, Chris Boldt, G. Garcia‐Arellano +4 more

Selective reflection is a high-resolution spectroscopic method that allows the probing of atomic and molecular gases in the near field of dielectric cell windows. It is a sensitive technique for measuring interactions between excited atoms and surfaces, thus providing a unique tool to probe resonant effects in Casimir-Polder physics. The theoretical modelling of selective reflection spectra has thus far employed the infinite Doppler approximation which assumes that the Doppler shift dominates over the atom-surface interactions as well as the homogeneous transition linewidth. Here we extend the theoretical treatment of selective reflection spectra to include the effects of finite Doppler width. This allows us to analyse the regime of very large Casimir-Polder interactions, relevant for Rydberg atom spectroscopy, and revisit previous analyses of experiments with low-lying excited states. Further, this will aid in determining the signatures of quantum friction in vapor cell spectroscopy.

arXiv:2507.05925•Physical Review A•Jun 23, 2025•1 citation

Selective reflection spectroscopy of a resonant vapor at the interface with a metallic layer

Martine Chevrollier, Marcos Oriá, Janete Gouveia de Souza +3 more

We discuss the properties of selective reflection spectroscopy at the interface between a resonant vapor and a complex dense medium, such as a metallic film layered on a dielectric substrate. We show that in the approximation of a low-density vapor, the signal mixes up the absorptive and dispersive components of the "effective resonant susceptibility" of the vapor, with the mixture amount governed by simple laws of linear optics. Preliminary experiments performed at the interface between Cs vapor (D2, 852-nm line) and a silver-coated glass window are reported, that show qualitatively the effect of the atom-surface van der Waals interaction.

Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics•Mar 27, 2001•21 citations

Direct detection of evanescent electromagnetic waves at a planar dielectric surface by laser atomic spectroscopy

Tatsuo Matsudo, Hirokazu Hori, Tetsuya Inoue +3 more

The penetration depth and pseudomomentum (wave vector) of evanescent electromagnetic waves are measured at a planar dielectric surface by means of laser spectroscopy using the Cs ${\mathrm{D}}_{2}$ line with a wavelength of 852.1 nm. The same experimental setup is employed in all the experiments. The first result shows a sharp, asymmetric absorption profile, which is explained in terms of the thin penetration depth, and the second shows an actual transfer of the pseudomomentum of the surface electromagnetic mode to atoms via a resonance interaction. The measured penetration depth and pseudomomentum agree with the natural interpretation of the complex wave number characterizing evanescent waves at a planar dielectric-vapor interface. Direct excitation of evanescent waves by excited Cs atoms has also been observed as atomic fluorescence emitted into the dielectric material at the angle of total internal reflection. The results are in good agreement with the theoretical predictions and exhibit the characteristics of excitation transfer or tunneling from Cs atoms into the surface mode.

Physical Review A•Mar 1, 1997•44 citations
Summary form only given. Reflection spectroscopy at a dielectric/atomic vapor interface allows one to study the properties of atoms close to a surface, within a depth of the order of the optical wavelength. We report on the use of evanescent wave spectroscopy to determine the temperature dependence of the adsorption time of Cs atoms on the pyrex window of an ordinary optical cell. Saturated absorption (SA) spectroscopy in a vapor is known to be a velocity selective technique, yielding Doppler-free spectra. In the presence of velocity changing collisions, SA spectroscopy can also provide information on the velocity redistribution (the collision kernel) provided that the pumping effect has not been totally washed out in the course of the collisional process.
Up to now, Doppler-free nonlinear spectroscopy has been applied to atoms inside a gas medium (volume spectroscopy). We have extended these methods to atoms in the vicinity of a surface. The basic principle consists of monitoring reflectivity changes produced when a laser beam, incident on a glass–vapor interface, is brought into resonance with an atomic transition. For Doppler-free spectroscopy, two counterpropagating beams are used to operate velocity selection. If these two beams are under normal incidence in the glass—velocity selection perpendicular to the surface—one observes saturated dispersion (selective reflection sensitive to the real index). For incidence angles in the glass (prism) larger than the critical angle (total internal reflection), a standing evanescent wave is produced in the gas (velocity selection along the surface), and saturated absorption is detected. Experimental demonstration was performed on the Na resonance line; high sensitivity (10−4 relative reflectivity change) and spectral resolution as good as 20 MHz were obtained. The main limitation to better resolution comes from the short atomic transit time in the evanescent wave (typical extension ~λ). Relevant applications of these techniques should also concern the diagnostics of optically thick media, as analysis of interaction between gas-phase atoms and the surface, notably atom–wall collisions, and modification of the spontaneous emission characteristics.
A new spectroscopic technique for studying adsorption of atoms at a transparent dielectric surface is exploited. A quantitative comparison of the Autler-Townes splitting in measured and calculated, surface temperature-dependent two-photon evanescent wave spectra provides values of the adsorption energy, the preexponential factor for the rate of desorption and the polarizability of alkali atoms, adsorbed on a glass surface. It is speculated that this technique could form the basis for future two-photon control of atoms close to dielectric surfaces.
Selective reflection spectroscopy at an interface with a low-density resonant vapor, especially when combined with a frequency modulation technique, is a high-resolution Doppler-free tool for probing atoms interacting with a surface. We analyze different types of relevant surface interaction, emphasizing the spectral consequences of a van der Waals surface attraction associated to a z−3z^{-3}z−3 potential dependence (zzz: distance to the wall). We present detailed results of two series of experiments at a Cs vapor/dielectric window interface on the 6S1/2_{1/2}1/2​-6P3/2_{3/2}3/2​ (λ=852\lambda = 852λ=852 nm) resonance line and on the 6S1/2_{1/2}1/2​-7P second resonance line (λ=455\lambda = 455λ=455 nm and 459 nm). Lineshape analysis at various pressures consistently shows that a van der Waals-type surface attraction has to be considered to interpret strong lineshape distortions and resonance shift. The attractive strengths are found to be equal respectively to ≈2\approx 2≈2 kHz μ\muμm3^33 and ≈20\approx 20≈20 kHz μ\muμm3^33, independently of the considered hyperfine component, within the experimental accuracy. It yields also typical parameters of pressure broadening and shift, which are shown to originate in collisional processes, at densities where the medium is opaque. Theoretical expectations for the VW strength are discussed on the basis of the results of atomic theory. The predicted values are smaller, by a typical factor of 2, than those deduced from the experiments. The validity of the theory, when applied to a dielectric interface, is discussed and seems questionable when the frequency of virtual atomic transitions involved in the van der Waals attraction potential lies in the dielectric window absorption range.
Selective reflection is a high-resolution spectroscopic method that allows the probing of atomic and molecular gases in the near field of dielectric cell windows. It is a sensitive technique for measuring interactions between excited atoms and surfaces, thus providing a unique tool to probe resonant effects in Casimir-Polder physics. The theoretical modelling of selective reflection spectra has thus far employed the infinite Doppler approximation which assumes that the Doppler shift dominates over the atom-surface interactions as well as the homogeneous transition linewidth. Here we extend the theoretical treatment of selective reflection spectra to include the effects of finite Doppler width. This allows us to analyse the regime of very large Casimir-Polder interactions, relevant for Rydberg atom spectroscopy, and revisit previous analyses of experiments with low-lying excited states. Further, this will aid in determining the signatures of quantum friction in vapor cell spectroscopy.
We discuss the properties of selective reflection spectroscopy at the interface between a resonant vapor and a complex dense medium, such as a metallic film layered on a dielectric substrate. We show that in the approximation of a low-density vapor, the signal mixes up the absorptive and dispersive components of the "effective resonant susceptibility" of the vapor, with the mixture amount governed by simple laws of linear optics. Preliminary experiments performed at the interface between Cs vapor (D2, 852-nm line) and a silver-coated glass window are reported, that show qualitatively the effect of the atom-surface van der Waals interaction.
The penetration depth and pseudomomentum (wave vector) of evanescent electromagnetic waves are measured at a planar dielectric surface by means of laser spectroscopy using the Cs D2{\mathrm{D}}_{2}D2​ line with a wavelength of 852.1 nm. The same experimental setup is employed in all the experiments. The first result shows a sharp, asymmetric absorption profile, which is explained in terms of the thin penetration depth, and the second shows an actual transfer of the pseudomomentum of the surface electromagnetic mode to atoms via a resonance interaction. The measured penetration depth and pseudomomentum agree with the natural interpretation of the complex wave number characterizing evanescent waves at a planar dielectric-vapor interface. Direct excitation of evanescent waves by excited Cs atoms has also been observed as atomic fluorescence emitted into the dielectric material at the angle of total internal reflection. The results are in good agreement with the theoretical predictions and exhibit the characteristics of excitation transfer or tunneling from Cs atoms into the surface mode.