Advances in semiconductor single photon avalanche diode detectors have enabled expanding application areas in the near-infrared. This presentation will discuss their performance, potential and their use in applications such as quantum key distribution
Single-photon detectors play an increasing role in emerging application areas in quantum communication and low-light level depth imaging. The single-photon detector characteristics have a telling impact in system performance, and this presentation will examine the role of single-photon detectors in these important application areas. We will discuss the experimental system performance of GHz-clocked quantum key distribution systems focusing on issues of quantum bit error rate, net bit rate and transmission distance with different detector structures, concentrating on single-photon avalanche diode detectors, but also examining superconducting nanowire-based structures. The quantum key distribution system is designed to be environmentally robust and an examination of long-term system operation will be presented. The role of detector performance in photon-counting time-of-flight three-dimensional imaging will also be discussed. We will describe an existing experimental test bed system designed for kilometer ranging, and recent experimental results from field trials. The presentation will investigate the key trade-offs in data acquisition time, optical power levels and maximum range. In both examples, experimental demonstrations will be presented to explore future perspectives and design goals.
InGaAs/InP single-photon avalanche diodes (SPADs) are widely used in practical applications requiring near-infrared photon counting such as quantum key distribution (QKD). Photon detection efficiency and dark count rate are the intrinsic parameters of InGaAs/InP SPADs, due to the fact that their performances cannot be improved using different quenching electronics given the same operation conditions. After modeling these parameters and developing a simulation platform for InGaAs/InP SPADs, we investigate the semiconductor structure design and optimization. The parameters of photon detection efficiency and dark count rate highly depend on the variables of absorption layer thickness, multiplication layer thickness, excess bias voltage, and temperature. By evaluating the decoy-state QKD performance, the variables for SPAD design and operation can be globally optimized. Such optimization from the perspective of specific applications can provide an effective approach to design high-performance InGaAs/InP SPADs.
In the last decade,more and more quantum information applications such as quantum key distribution have been extensively demonstrated.These emerging applications place rigorous demands on detector performance such as detection efficiency,intrinsic photon number resolving ability etc.that go beyond the capabilities of traditional single-photon detectors composed of either photomultiplier tubes(PMTs) or avalanche photodiodes(APDs).Fortunately,several new types of cryogenic detectors such as superconducting transition edge sensor(TES),superconducting nanowire single photon detector(SNSPD),and quantum-dot based single photon detector(QD SPD)have been realized recently.Here we review all kinds of single photon detector technologies at the present time. Advantages,disadvantages,and potential improvement of these techniques for quantum information applications are also discussed.
Single-photon detectors (SPDs) are the most sensitive instruments for light detection. In the near-infrared range, SPDs based on III–V compound semiconductor avalanche photodiodes have been extensively used during the past two decades for diverse applications due to their advantages in practicality including small size, low cost and easy operation. In the past decade, the rapid developments and increasing demands in quantum information science have served as key drivers to improve the device performance of single-photon avalanche diodes and to invent new avalanche quenching techniques. This Review aims to introduce the technology advances of InGaAs/InP single-photon detector systems in the telecom wavelengths and the relevant quantum communication applications, and particularly to highlight recent emerging techniques such as high-frequency gating at GHz rates and free-running operation using negative-feedback avalanche diodes. Future perspectives of both the devices and quenching techniques are summarized. Recent progress in single-photon detectors for quantum communication based on III–V compound semiconductor avalanche photodiodes is reviewed. Specifically, Jun Zhang and Jian-Wei Pan at the University of Science and Technology of China and their colleagues in the USA and Switzerland introduce technological advances for InGaAs/InP single-photon detector systems in the telecommunication band along with their associated applications in quantum communication. III–V single-photon avalanche diodes are the most practical tools available for detecting ultraweak near-infrared light. The scientists overview important parameters for evaluating the performance of detector systems based on single-photon avalanche diodes and describe the experimental characterization of these parameters. They also consider emerging techniques, including high-frequency gating at gigahertz rates and free-running operation using negative-feedback avalanche diodes. Finally, the future prospects of these devices are considered.