Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Conference on Nanotechnology (IEEE NANO)

Steps Towards Fabricating Cryogenic CMOS Compatible Single Electron Devices

Kevin Eng, Gregory A. Ten Eyck, Lisa Tracy, Eric P. Nordberg, K. D. Childs, Jeffery Stevens, J. R. Wendt, Michael P Lilly, M. S. Carroll

Published Aug 1, 2008• 5 citations
Publisher

Abstract

We describe the development of a novel silicon quantum bit (qubit) device architecture that involves using materials that are compatible with a Sandia National Laboratories (SNL) 0.35 mum complementary metal oxide semiconductor (CMOS) process intended to operate at 100 mK. We describe how the qubit structure can be integrated with CMOS electronics, which is believed to have advantages for critical functions like fast single electron electrometry for readout compared to current approaches using radio frequency techniques. Critical materials properties are reviewed and preliminary characterization of the SNL CMOS devices at 4.2 K is presented.

DOI
10.1109/nano.2008.149

Related papers

Cryogenic CMOS Integrated Circuits for Scalable Readout of Silicon Quantum Computers

Andrea Ruffino

Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.

•Jan 1, 2021•0 citations

CMOS-compatible processing and room-temperature characterization at the wafer level for scalable quantum computing

Simon Lang, T. Mayer, Johannes Weber +10 more

We report on an industry-grade complementary metal-oxide semiconductor (CMOS)-compatible qubit fabrication approach using a CMOS pilot line, enabling a yield of functional devices that reaches 92.8%, with a resistance spread evaluated across the full wafer 200 mm in diameter of 12.4% and relaxation times ${T}_{1}$ approaching $80\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. Furthermore, we conducted a comprehensive analysis of wafer-scale room-temperature (RT) characteristics collected from multiple wafers and fabrication runs, focusing on RT measurements and their correlation to low-temperature qubit parameters. From defined test structures, an across-wafer Josephson junction (JJ) area variation of 10.1% and oxide barrier variation of 7.2% was calculated. Additionally, from the room-temperature JJ characterization the qubit frequency can be derived at the wafer level by applying the Ambegaokar-Baratoff model before making low-temperature measurements. This sets the stage for precooldown wafer-level JJ evaluation and sorting. In particular, such early device characterization and validation are crucial for increasing the fabrication yield and qubit frequency targeting, which currently represent major scaling challenges. Furthermore, this enables the fabrication of large multichip quantum systems in the future. Our analysis highlights the great potential of CMOS-compatible industry-style fabrication of superconducting qubits for scalable quantum computing in a foundry pilot line cleanroom.

arXiv:2504.18173•Physical Review Applied•Nov 18, 2025•5 citations

Cryo-CMOS Mixed-Signal Circuits for Scalable Quantum Computing: Challenges and Future Steps

Stavroula Kapoulea, Meraj Ahmad, Martin P. Weides +1 more

A systematic research on the development of cryogenic complementary metal-oxide semiconductor (cryo-CMOS) circuits, for implementing the required control electronics to manipulate the quantum bit (qubit) state, is performed over the last few years. Scalability constitutes a key term regarding the evolution of quantum computing from theory to practical application and CMOS technology has been proven to be a promising candidate for implementing the coveted scalable next-generation quantum computers (QCs). Mixed-signal blocks, used for uniting the analog and digital domains, play a key role in the efficient functionality of the qubit control/readout system, thus there is an ever-increasing interest in their high-performance circuit realization. The critical challenge in this venture is to achieve efficient cryogenic operation at low temperatures, i.e., close to the qubit around 4 K, simultaneously keeping power requirements at low values. An overview and comparison of the cryo-CMOS Digital-to-Analog converter (DAC) and Analog-to-Digital converter (ADC) circuit implementations for quantum computing applications that heretofore have been proposed in the literature is presented in this work. A discussion on the challenges and future strategic steps that are henceforth required to proceed toward the development of a functional scalable quantum computer is also conducted.

IEEE International Symposium on Circuits and Systems proceedings•May 21, 2023•6 citations

Partitioning Cryogenic Integrated Electronics for Scalable Spin Qubit Operation

Lotte Geck, Pau Dietz Romero, Lammert Duipmans +1 more

A systematic investigation of currently implemented cryogenic electronics for controlling and reading out spin qubits using complementary metal-oxide semiconductor (CMOS) technology is done. Scalability is the primary focus in developing these circuits, as enabling universal quantum computing requires increasing the number of qubits by several orders of magnitude. Low power dissipation is a main quality benchmark for cryogenic circuits that is being optimized. Next to that, the possibility of connecting multiple control signals to each qubit is a challenge for large qubit numbers. Depending on the placement of the electronics, different power budgets and connectivity options are available. These characteristics are used to discuss medium and long-term use-cases for existing designs and what future concepts and developments might be possible or necessary for full scalability on the example of spin qubit operation electronics.

IEEE International Conference on Quantum Computing and Engineering (QCE)•Aug 30, 2025•0 citations

Spin-based Quantum Computing in Silicon: Scaling with CMOS

M. Fernando González-Zalba

As quantum processors grow in complexity, the focus is shifting towards the scaling of the entire quantum computing system, including the quantum hardware but as well the classical support electronics. Silicon-based quantum computing offers the enticing possibility that the quantum processor, the quantum-classical interface, and the classical layer can all, in principle, be manufactured using complementary metal-oxide semiconductor (CMOS) technology, creating an opportunity to move from distributed quantum-classical systems to integrated quantum computing solutions. Here, we review the state-of-the-art in spin-based quantum computing in silicon and present different approaches to help scale the technology using CMOS technology. We discuss the use of industry-manufactured silicon devices as the basic qubit element and present radio-frequency reflectometry techniques for fast high-fidelity spin readout. Finally, we show how quantum-classical co-integration can enable large-scale control and readout via frequency- and time-domain multiplexing.

IEEE International Conference on Electronics, Circuits and Systems (ICECS)•Oct 24, 2022•2 citations

Transistors to transmons: large-scale cryogenic CMOS control of superconducting qubits

Devin Underwood

Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.

•Jul 3, 2026•0 citations
We describe the development of a novel silicon quantum bit (qubit) device architecture that involves using materials that are compatible with a Sandia National Laboratories (SNL) 0.35 mum complementary metal oxide semiconductor (CMOS) process intended to operate at 100 mK. We describe how the qubit structure can be integrated with CMOS electronics, which is believed to have advantages for critical functions like fast single electron electrometry for readout compared to current approaches using radio frequency techniques. Critical materials properties are reviewed and preliminary characterization of the SNL CMOS devices at 4.2 K is presented.
Quantum computing promises to revolutionize our lives, achieving unprecedented computational powers and unlocking new possibilities in drug discovery, chemical simulations and cryptography. The fundamental unit of computation of a quantum computer is the quantum bit (qubit). It can be implemented in a number of technologies, such as superconducting qubits, spin qubits, photonic systems, trapped ions and NV-centers. Solid-state superconducting qubits and spin qubits seem to be the most promising ones, as shown by the recent demonstration of quantum supremacy with a superconducting qubit processor. Such quantum processors, to operate in the quantum regime, require very low temperatures around 10 mK, and they are hence kept inside dilution fridges. The electronics required to read out and control such processors is typically realized by discrete components or bulky scientific instruments at room temperature wired into the dilution fridge. Such approach is only feasible until few (< 100) qubits are handled, but it is not scalable for million-qubit processors required for fault-tolerant operation. In this thesis, readout and control electronics is proposed to be integrated and operated directly at cryogenic temperatures, in close proximity with the qubits and potentially even co-integrated. CMOS technology is advocated for its scalability, compactness and low prototyping cost, to create a comprehensive cryo-CMOS class of fully-integrated transceivers to read out and control solid-state qubits. In particular, the thesis focuses on cryo-CMOS radio-frequency integrated circuits for the readout of silicon quantum computers, looking to integrate the whole readout system, from the quantum layer to the room temperature user interface. Cryogenic CMOS devices are explored first, to lay the foundations of integrated circuit design. The realization of quantum dots in standard CMOS technology is explored as a platform to realize solid-state qubit arrays, demonstrating functionality at 50 mK and good reproducibility. Moreover, the operation of integrated transistors at 50 mK and 4.2 K is explored to understand their basic cryogenic functionality, through characterization and modeling. Then also integrated passives, such as capacitors, inductors and transformers, are studied and modeled at cryogenic temperatures. Then, a fully-integrated readout platform spanning across all the blocks needed for dispersive readout is proposed. A fully-integrated matrix of quantum dots with radio-frequency gate-based readout capabilities is demonstrated along with time- and frequency-multiplexing. This quantum-classical circuit shows all the features for a scalable approach and is the core of the platform following it. A cryogenic CMOS circulator based on a new all-pass filter architecture is demonstrated, to be used as integrated replacement for current bulky counterparts; it allows power reduction, insertion loss and bandwidth enhancement with respect to state-of-the-art integrated circulators. The rest of the front-end is also explored with dedicated test multiplexers, a low noise-amplifier and an oscillator, that are finally merged in a single fully-integrated low-noise receiver with frequency synthesizer operating at 3.5 K for scalable multiplexed readout of silicon qubits. The platform presented in this thesis, across temperature boundaries, carries all the features required for future scalable silicon quantum computing platforms and could therefore form their core.
We report on an industry-grade complementary metal-oxide semiconductor (CMOS)-compatible qubit fabrication approach using a CMOS pilot line, enabling a yield of functional devices that reaches 92.8%, with a resistance spread evaluated across the full wafer 200 mm in diameter of 12.4% and relaxation times T1{T}_{1}T1​ approaching $80\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\mathrm{s}$. Furthermore, we conducted a comprehensive analysis of wafer-scale room-temperature (RT) characteristics collected from multiple wafers and fabrication runs, focusing on RT measurements and their correlation to low-temperature qubit parameters. From defined test structures, an across-wafer Josephson junction (JJ) area variation of 10.1% and oxide barrier variation of 7.2% was calculated. Additionally, from the room-temperature JJ characterization the qubit frequency can be derived at the wafer level by applying the Ambegaokar-Baratoff model before making low-temperature measurements. This sets the stage for precooldown wafer-level JJ evaluation and sorting. In particular, such early device characterization and validation are crucial for increasing the fabrication yield and qubit frequency targeting, which currently represent major scaling challenges. Furthermore, this enables the fabrication of large multichip quantum systems in the future. Our analysis highlights the great potential of CMOS-compatible industry-style fabrication of superconducting qubits for scalable quantum computing in a foundry pilot line cleanroom.
A systematic research on the development of cryogenic complementary metal-oxide semiconductor (cryo-CMOS) circuits, for implementing the required control electronics to manipulate the quantum bit (qubit) state, is performed over the last few years. Scalability constitutes a key term regarding the evolution of quantum computing from theory to practical application and CMOS technology has been proven to be a promising candidate for implementing the coveted scalable next-generation quantum computers (QCs). Mixed-signal blocks, used for uniting the analog and digital domains, play a key role in the efficient functionality of the qubit control/readout system, thus there is an ever-increasing interest in their high-performance circuit realization. The critical challenge in this venture is to achieve efficient cryogenic operation at low temperatures, i.e., close to the qubit around 4 K, simultaneously keeping power requirements at low values. An overview and comparison of the cryo-CMOS Digital-to-Analog converter (DAC) and Analog-to-Digital converter (ADC) circuit implementations for quantum computing applications that heretofore have been proposed in the literature is presented in this work. A discussion on the challenges and future strategic steps that are henceforth required to proceed toward the development of a functional scalable quantum computer is also conducted.
A systematic investigation of currently implemented cryogenic electronics for controlling and reading out spin qubits using complementary metal-oxide semiconductor (CMOS) technology is done. Scalability is the primary focus in developing these circuits, as enabling universal quantum computing requires increasing the number of qubits by several orders of magnitude. Low power dissipation is a main quality benchmark for cryogenic circuits that is being optimized. Next to that, the possibility of connecting multiple control signals to each qubit is a challenge for large qubit numbers. Depending on the placement of the electronics, different power budgets and connectivity options are available. These characteristics are used to discuss medium and long-term use-cases for existing designs and what future concepts and developments might be possible or necessary for full scalability on the example of spin qubit operation electronics.
As quantum processors grow in complexity, the focus is shifting towards the scaling of the entire quantum computing system, including the quantum hardware but as well the classical support electronics. Silicon-based quantum computing offers the enticing possibility that the quantum processor, the quantum-classical interface, and the classical layer can all, in principle, be manufactured using complementary metal-oxide semiconductor (CMOS) technology, creating an opportunity to move from distributed quantum-classical systems to integrated quantum computing solutions. Here, we review the state-of-the-art in spin-based quantum computing in silicon and present different approaches to help scale the technology using CMOS technology. We discuss the use of industry-manufactured silicon devices as the basic qubit element and present radio-frequency reflectometry techniques for fast high-fidelity spin readout. Finally, we show how quantum-classical co-integration can enable large-scale control and readout via frequency- and time-domain multiplexing.
Abstract Realizing a practically useful superconducting quantum computer will require a dramatic scale-up of quantum control electronics to meet the growth in required qubit counts. Conventional rack-based room-temperature control electronics impose severe constraints on wiring density, cost, and system footprint, creating a barrier to large-scale and fault-tolerant quantum computing. Here we demonstrate a hybrid quantum control architecture that combines cryogenic complementary metal-oxide semiconductor (cryo‑CMOS) application-specific integrated circuits (ASICs) for two‑qubit flux control with room‑temperature radio‑frequency electronics for single‑qubit control and readout. The resulting system achieves high density and scalable quantum control without compromising two‑qubit gate fidelity. Deployed on a 156‑qubit quantum processor, the cryo-CMOS subsystem achieves two‑qubit gate errors at the {10}^{-3} level, with a best randomized benchmarking error per gate of 8.4\times{10}^{-4}, stable operation over multi‑day timescales, and no measurable performance degradation as we increase the temperature of the cryo-CMOS ASICs from 7 to 20 K. Thermal analysis identifies cryo-CMOS chip operation near 20 K as a favorable regime, enabling efficient cooling of a large number of channels per cryostat. Compared against rack‑based flux-control, the cryo-CMOS subsystem achieves statistically indistinguishable two-qubit gate fidelities under matched gate settings and enables a tenfold improvement in system spatial footprint. These results establish cryo‑CMOS flux control as a practical and scalable foundation for large‑scale and fault-tolerant superconducting quantum systems.