One-dimensional conductors are a long-standing topic of research with direct applications to organic conductors and mesoscopic rings. The discovery of the ceramic high-temperature superconductors has revitalized the interest in low-dimensional charge and spin fluctuations of highly correlated electron systems. Several mechanisms proposed to explain the high-T c superconductors invoke properties of the two-dimensional Hubbard model, but probably also some one-dimensional aspects are relevant. Numerous one-dimensional models for correlated electrons have been studied with various approximate, asymptotically exact and exact methods. These results lead to the concept of Luttinger liquid for interacting electron gases without excitation gaps (metallic systems). Characteristic of Luttinger liquids are the charge and spin separation, marginal Fermi liquid properties, e.g. the absence of quasiparticles in the vicinity of the Fermi surface, nonuniversal power-law singularities in the one-particle spectral function and the related absence of a discontinuity in the momentum distribution at the Fermi level, the power-law decay of correlation functions for long times and large distances, persistent currents in finite rings, etc. Due to the peculiarities of the phase space in one dimension some of the models have sufficient conserved currents to be completely integrable. We review exact results derived within the framework of Bethe's ansatz for integrable one-dimensional models of correlated electrons. The Bethe-ansatz method is presented by explicitly showing the steps leading to the solution of the N-component electron gas interacting via a δ-function potential (repulsive and attractive interaction), which is probably the simplest model of correlated electrons. Emphasis is given to the procedure to extract the groundstate properties, the classification of states, the excitation spectrum, the thermodynamics and finite size effects, such as critical exponents of correlation functions and persistent currents. The method is then applied to numerous other models, e.g. (i) a two-band model involving attractive and repulsive potentials and crystalline fields splitting the bands, (ii) the traditional Hubbard chain with attractive and repulsive U, (iii) the degenerate Hubbard model with repulsive U, which displays a metal–insulator transition at a finite U, (iv) a two-band Hubbard model with repulsive U, (v) the traditional supersymmetric t–J model (vi) a two-band supersymmetric t–J model with band-splitting and (vii) the N-component supersymmetric t–J model. Finally, results for models with long-range interactions, in particular r-2 and sinh -2(r) potentials, are briefly reviewed.
An exact description is given of the long-distance behaviour of the one-dimensional t-J model at t=J. The authors employ the Bathe ansatz method and the finite-size scaling technique in conformal field theory. The charge and spin degrees of freedom are separated, and described by two independent c=1 conformal theories. The critical exponents for the charge, spin, electron and superconducting correlation functions are obtained for arbitrary band filling. The authors then make detailed comparison of the t-J model with the repulsive Hubbard model with emphasis on the Luttinger liquid properties. Analysing the electron filling dependence they observe the enhancement of the superconducting correlations compared with the highly correlated Hubbard model. The effect of the external magnetic field at and near half-filling is also discussed.
Abstract We present analytical results of the fundamental properties of the one-dimensional (1D) Hubbard model with a repulsive interaction. The new model results with arbitrary external fields include: (I) using the exact solutions of the Bethe ansatz equations of the Hubbard model, we first rigorously calculate the gapless spin and charge excitations, exhibiting exotic features of fractionalized spinons and holons. We then investigate the gapped excitations in terms of the spin string and the k − Λ string bound states at arbitrary driving fields, showing subtle differences in spin magnons and charge η -pair excitations. (II) For a high-density and high spin magnetization region, i.e. near the quadruple critical point, we further analytically obtain the thermodynamic properties, dimensionless ratios and scaling functions near quantum phase transitions. (III) Importantly, we give the general scaling functions at quantum criticality for arbitrary filling and interaction strength. These can directly apply to other integrable models. (IV) Based on the fractional excitations and the scaling laws, the spin-incoherent Luttinger liquid (SILL) with only the charge propagation mode is elucidated by the asymptotic of the two-point correlation functions with the help of conformal field theory. We also, for the first time, obtain the analytical results of the thermodynamics for the SILL. (V) Finally, to capture deeper insights into the Mott insulator and interaction-driven criticality, we further study the double occupancy and propose its associated contact and contact susceptibilities, through which an adiabatic cooling scheme based upon quantum criticality is proposed. In this scenario, we build up general relations among arbitrary external- and internal-potential-driven quantum phase transitions, providing a comprehensive understanding of quantum criticality. Our methods offer rich perspectives of quantum integrability and offer promising guidance for future experiments with interacting electrons and ultracold atoms, both with and without a lattice.
Since the advent of high-
Tc cuprate superconductors in 1986, strongly correlated electron systems have attracted much attention. Since the cuprates are essentially two-dimensional, low-dimensional systems have moved into the focus of condensed-matter theory. From a theoretical point of view, one-dimensional systems are of particular interest because there are exact numerical and analytical methods which permit detailed studies and deep insights into the many-body problem. In the first part of this thesis, using the numerically exact methods Exact Diagonalization and the Density-Matrix Renormalization Group (DMRG), we investigate the properties of the Tomonaga–Luttinger liquid which is the generic metallic state of matter in one dimension. In particular, we concentrate on the investigation of the so-called Tomonaga–Luttinger liquid parameter which determines the critical exponent
α for the density of states near the Fermi energy. Experimental results for some quasi one-dimensional materials report
α≳1, which would imply
Kρ≲0.17, a value which cannot be reconciled with the bare Hubbard model where
KρH≥0.5, i.e.,
αH≲1/8. We develop new accurate numerical methods to obtain
Kρ and investigate how to obtain such small values for
Kρ for slightly doped charge-density-wave insulators. In the second part of this thesis, using the Thermodynamic Bethe Ansatz (TBA) as exact analytical method, we investigate the one-dimensional Hubbard model in the spindisordered regime, which is characterized by the temperature being much larger than the magnetic energy scale but small compared to the Mott–Hubbard gap. Our study is motivated by the controversy about the Mott–Hubbard insulator in infinite dimensions whose ground state is also spin-disordered. In this system the determination of the precise value of the critical interaction strength Uc where the Mott–Hubbard gap closes is still unsolved. Therefore, we provide an example of a Hubbard-type model with a disordered spin background which can be solved exactly. The thermodynamics of our model can be understood in terms of gapped charged excitations with an effective dispersion which are decoupled form the spin degrees of freedom; the latter contribute only entropically. An interpretation of this regime in terms of a putative interacting-electron system at zero temperature leads to a metal-insulator transition at a finite interaction strength above which the gap opens linearly. Our exact results indicate that the strong-coupling expansion of the ground-state energy cannot be used to locate
Uc. However, the strong-coupling expansion of the gap permits a reliable extrapolation of the critical interaction strength.
An exact description is given of the long-distance behaviour of the one-dimensional t-J model at t=J. The authors employ the Bathe ansatz method and the finite-size scaling technique in conformal field theory. The charge and spin degrees of freedom are separated, and described by two independent c=1 conformal theories. The critical exponents for the charge, spin, electron and superconducting correlation functions are obtained for arbitrary band filling. The authors then make detailed comparison of the t-J model with the repulsive Hubbard model with emphasis on the Luttinger liquid properties. Analysing the electron filling dependence they observe the enhancement of the superconducting correlations compared with the highly correlated Hubbard model. The effect of the external magnetic field at and near half-filling is also discussed.
Theoretical studies suggest that an interacting one-dimensional electron system does not behave as a Fermi liquid. Instead, it is predicted to form a Luttinger liquid characterized e.g. by the absence of fermionic quasiparticles and interaction-dependent power-laws for transport quantities. So far, however, only a limited number of experiments have provided evidence for Luttinger liquid behavior. In this thesis we consider alternative methods to detect electronic correlations in one-dimensional electron systems based on our calculations of persistent currents and quantization of charge in ballistic single channel rings. The persistent current in an isolated impurity-free Luttinger liquid ring is found to be the same as for a system of non-interacting electrons. In contrast, a Luttinger liquid behavior is revealed if the ring is weakly connected to an electron reservoir and capacitively coupled to a gate electrode. The persistent current and the average charge in the ring are shown to change in a stepwise manner with the gate voltage at low temperatures. Both the step positions and the crossover temperatures are determined by the Luttinger liquid correlation parameter .alpha.(.alpha.c) which therefore can be measured. When a potential barrier is incorporated into the ring, the presence of strong interactions between electrons leads to a suppression of the persistent current and a change in its temperature dependence. A sharp maximum of the current is predicted to occur as a function of temperature. When two barriers are introduced into the ring, the possibility of resonant tunneling for the persistent current opens up. Two kinds of resonant behavior are discovered in the closed geometry: a current independent of the barrier transparency and a current analogous to the one with a single potential barrier. The persistent current in a ring containing a gas of fractionally charged excitations obeying fractional exclusion statistics is also studied. At finite temperatures, anomalous oscillations of the current are predicted as a manifestation of the statistics of the quasiparticles.
This PhD thesis is concerned with the investigation of Extended Hubbard Models on one-dimensional lattices (chains); the approach used to such investigation is that of determining exact results. The extended Hubbard models are models of correlated electrons on lattices; they are the extensions of a model proposed by Hubbard in \\cite{HUB} to explain the metal-insulator transition in
d-transition compounds as the effect of electronic correlations, usually neglected in band theories. Later on, a need for extensions of such model was first felt within the context of high-temperature superconductivity; indeed, the different behaviour of doped cuprates with respect to conventional superconductors suggested that a microscopic theory of this phenomenon could be formulated in terms of electron-electron interaction, without explicitly invoking the phonon coupling, like in BCS theory. Although an exhaustive microscopic formulation for cuprate superconductivity has not been achieved yet, the Extended Hubbard Models have been in the meanwhile applied to other problems in condensed matter; they are actually considered the reference paradigm for treating all those systems in which electronic correlations cannot be neglected. \\\\As observed above, this thesis focuses in particular on 1-D chains: indeed in last years the progress in technological synthesization and small-scale observations has shown that there are many classes of materials exhibiting a strong one-dimensional character, such as organic (super)conductors, linear-chain polymers, quantum wires, quantum-dot chains, one-dimensional cuprates. Many experimental results confirm that such materials exhibit a quite rich behaviour, with different phases, charge-spin separation, as well as a strong electronic correlations. However, a sufficient understanding of these phenomena on a theoretical point of view has not been reached yet. This is due to the fact the usual theoretical methods can be shown to fail in D=1, and theoreticians are thus forced to develop new schemes for approaching the problem of many interacting fermions in such dimension. The latter therefore represents a fascinating challenge. Some progress has been made and many aspects are nowadays more clear; nevertheless, due to the lack of traditional techniques, the need for a comparison with exact results is perhaps more urgent in D=1 than in higher dimensions. The aim of this thesis is to provide some results to the research in this field. The present work is organized as follows: the two first chapters are introductory, while chapters 3 and 4 mostly contain the author's original contribution. More explicitly, {\\bf chapter 1} is an introduction to the Hubbard models (both the ordinary and the Extended) and is meant for the reader who is non-familiar with these models. We tried to emphasize the motivation that historically led to their introduction and the physical contexts in which they are applied, not necessarily in one-dimension. \\\\{\\bf Chapter 2} is instead devoted to general problematics of one dimensional physics. We have tried to stress that there is a number of physically interesting materials that can be regarded as actual 1-D systems; we give a brief account of the difficulties leading the usual theoretical approaches, such as mean-field and Fermi Liquid, to fail in D=1. While briefly describing the important results of the proposed alternative formulations (Luttinger Liquid, Renormalization Group), we also point out the points that are still unsatisfactory, and emphasize the importance that exactly integrable models have in this field. \\\\Matching the subjects of chapter 1 and 2, the subsequent ones contain the results of our investigation of exactly solvable Extended Hubbard model on 1-D chains. \\\\We wish to emphasize to the reader non familiar with integrable systems that the literature on this subject is often strongly concerned with the mathematical aspects of the involved methods, leaving the determination of the physical features of the derived integrable models as a secondary issue. On the contrary, we believe that both aspects of the research deserve a relevant role in the study. For these reasons, while chapter 3 contains new results about the general formulation of integrability for fermionic systems, chapter 4 is devoted to the investigation of the physical features for some models whose integrability has been proved in the previous chapter. \\\\More explicitly, in {\\bf chapter 3} (apart from a preliminary introduction of sec.3.1) the theory of integrable {\\it fermionic} systems has been developed within the frame of the Quantum Inverse Scattering Method (QISM). The latter is a technique for obtaining integrable models, traditionally formulated with success for spin systems; its more recent application to electron systems was leaving many unsatisfactory aspects. To overcome this weaknesses, in sec.3.2 we both clarify the theory of matrix representation for fermionic operators, and describe a method for obtaining integrable models of fermions (straightforwardly readable in terms of fermion operators), starting from the the solutions of a
mathbbC-number equation (known as Yang-Baxter Equation). In sec.3.3 we first work out a general method of search for solutions of such equation; secondly we explicitly find 96 solutions, corresponding to 96 integrable Extended Hubbard models (most of which are new) for which a set of mutually commuting operators is proved to exist. In sec.3.4 we formulate a general theorem concerning the symmetries of the integrable models in QISM, and widely discuss the symmetries and supersymmetries for the class of extended Hubbard Models.\\\\ {\\bf Chapter 4} is devoted to the investigation of the physical properties of the integrable Extended Hubbard models found in chapter 3. We introduce a technique, called Sutherland's species technique, that, when applicable, yields an effective reduction of the Hilbert space and considerably simplifies the problem of diagonalizing the Hamiltonian. In fact, such technique is proved to be applicable to all the 96 models found above, and is used to determine the exact ground state phase diagram and the thermodynamics of the models. In particular we both recover in a quite straightforward way the phase diagram of a known model, and that of two new models (Model 2 and Model 3) that were not known before. \\\\The phase diagram exhibit structured forms with respect to the filling (density of electrons) and the on-site Coulomb repulsion (
U); the pressure and the compressibility in the ground state are also calculated. Model 2 exhibits a superconducting phase particularly enhanced towards positive values of
U, as well as a band-controlled insulator-superconductor transition at half filling; model 3 is the first example of exactly solved model with an asymmetric shape with respect to half-filling, due to the absence of particle-hole invariance of the Hamiltonian; a filling controlled metal-insulator transition is found to occur for this model. Generalizations to the other cases are also discussed. \\\\As to the thermodynamics, we compute the exact partition function of Model 3, which we believe to be particular worth of interest due to the above asymmetry. We then derive the exact specific heat of the model as a function of the temperature, which exhibits an interesting two-peak behaviour as well as a nearly universal crossing point. These results are discussed and compared with similar ones present in the literature. The chapters are of course linked each to another according to the above scheme; nevertheless, it has been a purpose of the author to make them as independently readable as possible. In particular, the reader who is more interested in the physical aspects of the models rather than in the general formalism of fermionic QISM can skip chapter 3 (at least in a first-sight reading) and pass directly to chapter 4; apart from some references to previous formulas the understanding should not be affected.\\\\{\\it \\noindent \\underline{Notational Remark:}} The customary symbol to denote the electron filling is
n; this has in fact been used throughout the two first introductory chapters. Nevertheless, in order to avoid possible misunderstanding with other extensive quantities, in chapter 3~and~4~the~symbol~has been changed into
rho