Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Journal of Electronics

An analysis of the inflexion point structure of Josephson absorption effect current steps

Ranko Mutabžija

Published Mar 1, 1977• 0 citations
Publisher

Abstract

The inner structure of the Josephson absorption effect IV characteristic in the vicinity of the inflexion points is analysed for stationary finite bandwidth irradiation. The zero crossings and the slopes of the higher-order derivatives of the IV characteristic offer further possibilities for more precise Josephon voltage determination. The results of the analysis indicate that the properties of the inner structure of the IV characteristic affect applications such as frequency multiplication and frequency mixing.

DOI
10.1080/00207217708900637

Related papers

Enhancement of Josephson Phase Diffusion by Microwaves

Yuri Koval, M. V. Fistul, Alexey Vladimirovich Ustinov

We report an experimental and theoretical study of the phase diffusion in small Josephson junctions under microwave irradiation. A peculiar enhancement of the phase diffusion by microwaves is observed. The enhancement manifests itself by a pronounced current peak in the current-voltage characteristics. The voltage position V(top) of the peak increases with the power P of microwave radiation as V(top) proportional to sqrt[P], while its current amplitude weakly decreases with P. As the microwave frequency increases, the peak feature evolves into Shapiro steps with a finite slope. Our theoretical analysis, taking into account the enhancement of incoherent superconducting current by multiphoton absorption, is in good agreement with experimental data.

arXiv:cond-mat/0406710•Physical Review Letters•Aug 19, 2004•32 citations

I-V Characteristics of NbN-NbN Josephson Point Contacts

Yuji Ohno, Yukinobu Miki, Toshinari Goto +1 more

Current-voltage characteristics of NbN-NbN Josephson point contacts have been examined. The point contacts were formed by NbN thin films deposited on Nb or W whiskers and Nb posts. The current-voltage characteristics of those contacts were investigated with and without irradiation of microwaves and far-infrared light. High values of the I c R n product and the energy gap structure were observed, which corresponded to the high-energy gap of NbN. Shapiro steps for far-infrared light up to 170 µm were observed and the possibility of replacing Nb Josephson point contacts with NbN ones is indicated.

Japanese Journal of Applied Physics•Apr 1, 1988•0 citations

Electrical properties of stacks of many long Josephson junctions

Alexandr Grib, Руслан Володимирович Вовк, S. V. Savich +1 more

We investigated numerically IV-characteristics and power of emission from stacks with various quantities of long Josephson junctions (up to 6 junctions) which interacted inductively with each other. Parameters of junctions were chosen close to those for MoRe-Si(W)-MoRe heterostructures. We set Gaussian spread of about 0.01% of critical currents along junctions. Electrical properties of a stack consisted of three junctions was investigated in details. Zero-fi eld steps at voltages corresponding to frequencies of various modes of electromagnetic waves in the stack were found in the IV-characteristic. We showed that positions of zero-fi eld steps in IV-curves were in good agreement with predictions of the theory. The highest maximum of power of emission corresponded to the so-called in-phase mode at which all voltages over junctions in the stack oscillate in-phase. Considering stacks with many junctions, we showed that power of emission at the voltage of the resonance which corresponds to the in-phase mode is proportional to the square of quantity of long junctions in the stack that is the characteristic of coherent emission.

The Journal of V N Karazin Kharkiv National University Series Physics•Jan 1, 2018•0 citations

Perturbation treatment of mixing in Josephson junctions

Mogens T. Levinsen, B. T. Ulrich

We consider a current biased, resistively shunted josephson junction irradiated at two frequencies. The perturbation technique introduced by Aslamasov and Larkin is used in the calculations. Both signals are treated as perturbations. The second order calculation yields the size of the mixing steps atV_{\pm}=h(\omega_{1}\pm\omega_{2})/2e. As in the case of a single frequency we show that subharmonic mixing steps are absent. The amplitude of the voltage oscillation at the difference and sum frequencies is shown to be non-zero at all voltages. We calculate the microwave resistance for one frequency ω2to third order in the perturbation. There are negative resistance regions nearV\pm(as well as nearV_{2}= h\omega_{2}/2e). Near V, the negative resistance region appears for bias voltage V just aboveV_{-}, while near V the region appears for V just belowV_{+}. This means that when an incident frequency mixes with a cavity mode the mixing step atV_{-}will be inverted compared to the cavity step itself.

IEEE Transactions on Magnetics•Mar 1, 1975•4 citations

Development and investigation of Nb-Al-oxide-Nb Josephson Junction arrays

A.F. Bochanov, V.D. Gelikonova, Alexander M. Klushin

An array of 3072 Josephson junctions Nb - AlO{sub x} - Nb is developed at IEM {open_quotes}KVARZ{close_quotes}. Some preliminary results of an investigation of IV curves under microwave irradiation in the 70 GHz frequency band are given. Zero current quantized voltage steps are displayed up to 450 mV with an amplitude > 100 {mu}A. An improvement of the fabrication process, which is in progress, will enable to increase quantized voltage steps region up to IV.

•Dec 31, 1994•0 citations

High-Frequency Response of Josephson Point Contacts

Helmut Kanter, F. L. Vernon

For a current-driven Josephson junction shunted by an Ohmic resistance, the dc voltage response and impedance to external high-frequency currents is calculated with a second-order perturbation method based on the unperturbed solution for the time evolution of the voltage as given by Aslamazov and Larkin. The response is proportional to signal power and has three characteristic-frequency regions depending on whether the internal self-generated Josephson frequency, ω0, is larger than, equal to, or smaller than the signal frequency, ω. For ω0< or >ω the response could be expressed by easily observable parameters of the dc voltage-current characteristics. This permits comparison of the predictions with experimental results obtained on point-contact junctions whose dc characteristics were only approximately represented by the simple model chosen for analysis. For ω0≪ω the response is found to be proportional to (i) the slope of the dc characteristic, (ii) the inverse square of the applied frequency, (iii) the inverse battery current in terms of the critical current, and (iv) the voltage amplitude of the inherent Josephson oscillations. For ω0≫ω ``classical'' detection proportional to curvature is obtained. For ω0∼ω resonance detection occurs, which depends to a considerable degree on fluctuations of the average contact voltage. These predictions are in reasonable agreement with experiments in which point-contact junctions were illuminated with klystron radiation at 10 and 90 GHz. Evidence is presented that the voltage fluctuations limiting the resonance response are the result of noise generated in the junction. Comparison of the noise-equivalent power expected from the simple model with measured results suggests that parasitic elements, such as shunt capacity, are not negligible at 90 GHz.

Journal of Applied Physics•Jul 1, 1972•101 citations
The inner structure of the Josephson absorption effect IV characteristic in the vicinity of the inflexion points is analysed for stationary finite bandwidth irradiation. The zero crossings and the slopes of the higher-order derivatives of the IV characteristic offer further possibilities for more precise Josephon voltage determination. The results of the analysis indicate that the properties of the inner structure of the IV characteristic affect applications such as frequency multiplication and frequency mixing.
We report an experimental and theoretical study of the phase diffusion in small Josephson junctions under microwave irradiation. A peculiar enhancement of the phase diffusion by microwaves is observed. The enhancement manifests itself by a pronounced current peak in the current-voltage characteristics. The voltage position V(top) of the peak increases with the power P of microwave radiation as V(top) proportional to sqrt[P], while its current amplitude weakly decreases with P. As the microwave frequency increases, the peak feature evolves into Shapiro steps with a finite slope. Our theoretical analysis, taking into account the enhancement of incoherent superconducting current by multiphoton absorption, is in good agreement with experimental data.
Current-voltage characteristics of NbN-NbN Josephson point contacts have been examined. The point contacts were formed by NbN thin films deposited on Nb or W whiskers and Nb posts. The current-voltage characteristics of those contacts were investigated with and without irradiation of microwaves and far-infrared light. High values of the I c R n product and the energy gap structure were observed, which corresponded to the high-energy gap of NbN. Shapiro steps for far-infrared light up to 170 µm were observed and the possibility of replacing Nb Josephson point contacts with NbN ones is indicated.
We investigated numerically IV-characteristics and power of emission from stacks with various quantities of long Josephson junctions (up to 6 junctions) which interacted inductively with each other. Parameters of junctions were chosen close to those for MoRe-Si(W)-MoRe heterostructures. We set Gaussian spread of about 0.01% of critical currents along junctions. Electrical properties of a stack consisted of three junctions was investigated in details. Zero-fi eld steps at voltages corresponding to frequencies of various modes of electromagnetic waves in the stack were found in the IV-characteristic. We showed that positions of zero-fi eld steps in IV-curves were in good agreement with predictions of the theory. The highest maximum of power of emission corresponded to the so-called in-phase mode at which all voltages over junctions in the stack oscillate in-phase. Considering stacks with many junctions, we showed that power of emission at the voltage of the resonance which corresponds to the in-phase mode is proportional to the square of quantity of long junctions in the stack that is the characteristic of coherent emission.
We consider a current biased, resistively shunted josephson junction irradiated at two frequencies. The perturbation technique introduced by Aslamasov and Larkin is used in the calculations. Both signals are treated as perturbations. The second order calculation yields the size of the mixing steps atV_{\pm}=h(\omega_{1}\pm\omega_{2})/2e. As in the case of a single frequency we show that subharmonic mixing steps are absent. The amplitude of the voltage oscillation at the difference and sum frequencies is shown to be non-zero at all voltages. We calculate the microwave resistance for one frequency ω2to third order in the perturbation. There are negative resistance regions nearV\pm(as well as nearV_{2}= h\omega_{2}/2e). Near V, the negative resistance region appears for bias voltage V just aboveV_{-}, while near V the region appears for V just belowV_{+}. This means that when an incident frequency mixes with a cavity mode the mixing step atV_{-}will be inverted compared to the cavity step itself.
For a current-driven Josephson junction shunted by an Ohmic resistance, the dc voltage response and impedance to external high-frequency currents is calculated with a second-order perturbation method based on the unperturbed solution for the time evolution of the voltage as given by Aslamazov and Larkin. The response is proportional to signal power and has three characteristic-frequency regions depending on whether the internal self-generated Josephson frequency, ω0, is larger than, equal to, or smaller than the signal frequency, ω. For ω0< or >ω the response could be expressed by easily observable parameters of the dc voltage-current characteristics. This permits comparison of the predictions with experimental results obtained on point-contact junctions whose dc characteristics were only approximately represented by the simple model chosen for analysis. For ω0≪ω the response is found to be proportional to (i) the slope of the dc characteristic, (ii) the inverse square of the applied frequency, (iii) the inverse battery current in terms of the critical current, and (iv) the voltage amplitude of the inherent Josephson oscillations. For ω0≫ω ``classical'' detection proportional to curvature is obtained. For ω0∼ω resonance detection occurs, which depends to a considerable degree on fluctuations of the average contact voltage. These predictions are in reasonable agreement with experiments in which point-contact junctions were illuminated with klystron radiation at 10 and 90 GHz. Evidence is presented that the voltage fluctuations limiting the resonance response are the result of noise generated in the junction. Comparison of the noise-equivalent power expected from the simple model with measured results suggests that parasitic elements, such as shunt capacity, are not negligible at 90 GHz.