Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Globecom

Lowering LDPC Error Floors by Postprocessing

Zhengya Zhang, Lara Dolecek, Borivoje Nikolić, Venkat Anantharam, Martin J. Wainwright

Published Jan 1, 2008• 82 citations
Publisher

Abstract

A class of combinatorial structures, called absorbing sets, strongly influences the performance of low-density parity-check (LDPC) decoders at low error rates. Past experiments have shown that a class of (8,8) absorbing sets determines the error floor performance of the (2048,1723) Reed-Solomon based LDPC code (RS-LDPC). A postprocessing approach is formulated to exploit the structure of the absorbing set by biasing the reliabilities of selected messages in a message-passing decoder. The approach converges quickly and can be efficiently implemented with minimal overhead. Hardware emulation of the decoder with postprocessing shows more than two orders of magnitude improvement in the very low bit error rate performance and error- floor-free operation below a BER of 10-12.

DOI
10.1109/glocom.2008.ecp.590

Related papers

Design of LDPC decoders for improved low error rate performance: quantization and algorithm choices

Zhengya Zhang, Lara Dolecek, Borivoje Nikolić +2 more

Abstract—Many classes of high-performance low-density parity-check (LDPC) codes are based on parity check matrices composed of permutation submatrices. We describe the design of a parallel-serial decoder architecture that can be used to map any LDPC code with such a structure to a hardware emulation platform. High-throughput emulation allows for the exploration of the low bit-error rate (BER) region and provides statistics of the error traces, which illuminate the causes of the error floors of the (2048, 1723) Reed-Solomon based LDPC (RS-LDPC) code and the (2209, 1978) array-based LDPC code. Two classes of error events are observed: oscillatory behavior and convergence to a class of non-codewords, termed absorbing sets. The influence of absorbing sets can be exacerbated by message quantization and decoder implementation. In particular, quantization and the log-tanh function approximation in sum-product decoders

IEEE Transactions on Communications•Nov 1, 2009•110 citations

Quantization Effects in Low-Density Parity-Check Decoders

Zhengya Zhang, Lara Dolecek, Martin J. Wainwright +2 more

A. class of combinatorial structures, called absorbing sets, strongly influences the performance of low-density parity- check (LDPC) decoders. In particular, the quantization scheme strongly affects which absorbing sets dominate in the error-floor region. Absorbing sets may be characterized as weak or strong. They are a characteristic of the parity check matrix of a code. Conventional quantization schemes applied to a (2209,1978) array-based LDPC code can induce low-weight weak absorbing sets and, as a result, elevate the error floor. Adaptive quantization schemes alleviate the effects of weak absorbing sets, and, as a result, only the strong ones dominate the error floor of an optimized decoder implementation. Another benefit of an adaptive quantization scheme is that it performs well even in very few iterations.

International Conference on Communications•Jun 1, 2007•46 citations

Analysis of Absorbing Sets and Fully Absorbing Sets of Array-Based LDPC Codes

Lara Dolecek, Zhengya Zhang, Venkat Anantharam +2 more

The class of low-density parity-check (LDPC) codes is attractive, since such codes can be decoded using practical message-passing algorithms, and their performance is known to approach the Shannon limits for suitably large block lengths. For the intermediate block lengths relevant in applications, however, many LDPC codes exhibit a so-called “error floor,” corresponding to a significant flattening in the curve that relates signal-to-noise ratio (SNR) to the bit-error rate (BER) level. Previous work has linked this behavior to combinatorial substructures within the Tanner graph associated with an LDPC code, known as (fully) absorbing sets. These fully absorbing sets correspond to a particular type of near-codewords or trapping sets that are stable under bit-flipping operations, and exert the dominant effect on the low BER behavior of structured LDPC codes. This paper provides a detailed theoretical analysis of these (fully) absorbing sets for the class of$C_{p, \gamma}$array-based LDPC codes, including the characterization of all minimal (fully) absorbing sets for the array-based LDPC codes for$\gamma = 2,3,4$, and moreover, it provides the development of techniques to enumerate them exactly. Theoretical results of this type provide a foundation for predicting and extrapolating the error floor behavior of LDPC codes.

IEEE Transactions on Information Theory•Jan 1, 2010•204 citations

Design and Implementation of Low Bit Error Rate of LDPC Decoder

Ashlesha P. Kshirsagar, Sandeep Kakde, Manish Devendra Chawhan +1 more

Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.

International Conference on Communication Systems and Network Technologies•Apr 1, 2015•1 citation

On absorbing sets of structured sparse graph codes

Lara Dolecek

In contrast to the capacity approaching performance of iteratively decoded low-density parity check (LDPC) codes, many practical finite-length LDPC codes exhibit performance degradation, manifested in a so-called error floor. Previous work has linked this phenomenon to the presence of certain combinatorial structures within the Tanner graph representation of the code, termed absorbing sets. Absorbing sets are stable under the bit-flipping operations and have been shown to act as fixed points (¿absorbers¿) for a wider class of iterative decoding algorithms. Codes often possess absorbing sets whose size is smaller than the minimum distance: the smallest absorbing sets are deemed most detrimental culprits behind the error floor. This paper focuses on the elementary combinatorial bounds of the smallest (candidate) absorbing sets. For certain classes of practical codes we demonstrate the tightness of these bounds and show how can the structure of the code and the structure of the absorbing sets be utilized to increase the size of the smallest absorbing sets without compromising other code properties such as the node degrees and the girth. As such, this work provides a step towards a better code design by taking into account the combinatorial nature of fixed points of iterative decoding algorithms.

Information Theory and Applications Workshop (ITA)•Jan 1, 2010•21 citations

Improving the Error Floor Performance of LDCP Codes with Better Codes and Better Decoders

Dung Viet Nguyen

Error correcting codes are used in virtually all communication systems to ensure reliable transmission of information. In 1948, Shannon established an upper-bound on the maximum rate at which information can be transmitted reliably over a noisy channel. Reliably transmitting information with a rate close to this theoretical limit, known as the channel capacity, has been the goal of channel coding scientists for the last five decades. The rediscovery of low-density parity-check (LDPC) codes in the 1990s added much-renewed excitement in the coding community. LDPC codes are interesting because they can approach channel capacity under sub-optimum decoding algorithms whose complexity is linear in the code length. Unsurprisingly, LDPC codes quickly attained their popularity in practical applications such as magnetic storage, wireless and optical communications. One, if not the most, important and challenging problem in LDPC code research is the study and analysis of the error floor phenomenon. This phenomenon is described as an abrupt degradation in the frame error rate performance of LDPC codes in the high signal-to-noise ratio region. Error floor is harmful because its presence prevents the LDPC decoder from reaching very low probability of decoding failure, an important requirement for many applications. Not long after the rediscovery of LDPC codes, scientists established that error floor is caused by certain harmful structures, most commonly known as trapping sets, in the Tanner representation of a code. Since then, the study of error floor mostly consists of three major problems: 1) estimating error floor; 2) constructing LDPC codes with low error floor and 3) designing decoders that are less susceptible to error floor. Although some parts of this dissertation can be used as important elements in error floor estimation, our main contributions are a novel method for constructing LDPC codes with low error floor and a novel class of low complexity decoding algorithms that can collectively alleviate error floor. These contributions are summarized as follows. A method to construct LDPC codes with low error floors on the binary symmetric channel is presented. Codes are constructed so that their Tanner graphs are free of certain small trapping sets. These trapping sets are selected from the Trapping Set Ontology for the Gallager A/B decoder. They are selected based on their relative harmfulness for a given decoding algorithm. We evaluate the relative harmfulness of different trapping sets for the sum-product algorithm by using the topological relations among them and by analyzing the decoding failures on one trapping set in the presence or absence of other trapping sets. We apply this method to construct structured LDPC codes. To facilitate the discussion, we give a new description of structured LDPC codes whose parity-check matrices are arrays of permutation matrices. This description uses Latin squares to define a set of permutation matrices that have disjoint support and to derive a simple necessary and sufficient condition for the Tanner graph of a code to be free of four-cycles. A new class of bit flipping algorithms for LDPC codes over the binary symmetric channel is proposed. Compared to the regular (parallel or serial) bit flipping algorithms, the proposed algorithms employ one additional bit at a variable node to represent its "strength." The introduction of this additional bit allows an increase in the guaranteed error correction capability. An additional bit is also employed at a check node to capture information which is beneficial to decoding. A framework for failure analysis and selection of two-bit bit flipping algorithms is provided. The main component of this framework is the (re)definition of trapping sets, which are the most "compact" Tanner graphs that cause decoding failures of an algorithm. A recursive procedure to enumerate trapping sets is described. This procedure is the basis for selecting a collection of algorithms that work well together. It is demonstrated that decoders which employ a properly selected group of the proposed algorithms operating in parallel can offer high speed and low error floor decoding.

•Jan 1, 2012•1 citation
A class of combinatorial structures, called absorbing sets, strongly influences the performance of low-density parity-check (LDPC) decoders at low error rates. Past experiments have shown that a class of (8,8) absorbing sets determines the error floor performance of the (2048,1723) Reed-Solomon based LDPC code (RS-LDPC). A postprocessing approach is formulated to exploit the structure of the absorbing set by biasing the reliabilities of selected messages in a message-passing decoder. The approach converges quickly and can be efficiently implemented with minimal overhead. Hardware emulation of the decoder with postprocessing shows more than two orders of magnitude improvement in the very low bit error rate performance and error- floor-free operation below a BER of 10-12.
Abstract—Many classes of high-performance low-density parity-check (LDPC) codes are based on parity check matrices composed of permutation submatrices. We describe the design of a parallel-serial decoder architecture that can be used to map any LDPC code with such a structure to a hardware emulation platform. High-throughput emulation allows for the exploration of the low bit-error rate (BER) region and provides statistics of the error traces, which illuminate the causes of the error floors of the (2048, 1723) Reed-Solomon based LDPC (RS-LDPC) code and the (2209, 1978) array-based LDPC code. Two classes of error events are observed: oscillatory behavior and convergence to a class of non-codewords, termed absorbing sets. The influence of absorbing sets can be exacerbated by message quantization and decoder implementation. In particular, quantization and the log-tanh function approximation in sum-product decoders
A. class of combinatorial structures, called absorbing sets, strongly influences the performance of low-density parity- check (LDPC) decoders. In particular, the quantization scheme strongly affects which absorbing sets dominate in the error-floor region. Absorbing sets may be characterized as weak or strong. They are a characteristic of the parity check matrix of a code. Conventional quantization schemes applied to a (2209,1978) array-based LDPC code can induce low-weight weak absorbing sets and, as a result, elevate the error floor. Adaptive quantization schemes alleviate the effects of weak absorbing sets, and, as a result, only the strong ones dominate the error floor of an optimized decoder implementation. Another benefit of an adaptive quantization scheme is that it performs well even in very few iterations.
The class of low-density parity-check (LDPC) codes is attractive, since such codes can be decoded using practical message-passing algorithms, and their performance is known to approach the Shannon limits for suitably large block lengths. For the intermediate block lengths relevant in applications, however, many LDPC codes exhibit a so-called “error floor,” corresponding to a significant flattening in the curve that relates signal-to-noise ratio (SNR) to the bit-error rate (BER) level. Previous work has linked this behavior to combinatorial substructures within the Tanner graph associated with an LDPC code, known as (fully) absorbing sets. These fully absorbing sets correspond to a particular type of near-codewords or trapping sets that are stable under bit-flipping operations, and exert the dominant effect on the low BER behavior of structured LDPC codes. This paper provides a detailed theoretical analysis of these (fully) absorbing sets for the class ofCp,γC_{p, \gamma}Cp,γ​array-based LDPC codes, including the characterization of all minimal (fully) absorbing sets for the array-based LDPC codes forγ=2,3,4\gamma = 2,3,4γ=2,3,4, and moreover, it provides the development of techniques to enumerate them exactly. Theoretical results of this type provide a foundation for predicting and extrapolating the error floor behavior of LDPC codes.
Many classes of high-performance Low-density parity check codes are based on parity check matrices composed of permutation sub matrices. The emulation-simulation framework further allows the algorithm and implementation to be iteratively redefined to improve the error floor performance of message passing decoder. Log-Like hood-Ratio (LLR) based Belief-Propagation (BP) algorithm is presented for Low Density Parity Check codes. Numerically accurate representation of check node update computation used in LLR-BP decoding is described. The implementation of Sum-Product algorithm (SPA) within Low Density Parity Check Code (LDPC) decoder is described in this paper and the correction term is used to improve the decoding performance of min-sum algorithm (MSA). Quantization and log-tanh function approximation in sum-product decoder strongly affect which absorbing set dominates in error floor region. For LDPC decoder, bit error rate (BER) decreases with increase in the signal to noise ratio.
In contrast to the capacity approaching performance of iteratively decoded low-density parity check (LDPC) codes, many practical finite-length LDPC codes exhibit performance degradation, manifested in a so-called error floor. Previous work has linked this phenomenon to the presence of certain combinatorial structures within the Tanner graph representation of the code, termed absorbing sets. Absorbing sets are stable under the bit-flipping operations and have been shown to act as fixed points (¿absorbers¿) for a wider class of iterative decoding algorithms. Codes often possess absorbing sets whose size is smaller than the minimum distance: the smallest absorbing sets are deemed most detrimental culprits behind the error floor. This paper focuses on the elementary combinatorial bounds of the smallest (candidate) absorbing sets. For certain classes of practical codes we demonstrate the tightness of these bounds and show how can the structure of the code and the structure of the absorbing sets be utilized to increase the size of the smallest absorbing sets without compromising other code properties such as the node degrees and the girth. As such, this work provides a step towards a better code design by taking into account the combinatorial nature of fixed points of iterative decoding algorithms.
Error correcting codes are used in virtually all communication systems to ensure reliable transmission of information. In 1948, Shannon established an upper-bound on the maximum rate at which information can be transmitted reliably over a noisy channel. Reliably transmitting information with a rate close to this theoretical limit, known as the channel capacity, has been the goal of channel coding scientists for the last five decades. The rediscovery of low-density parity-check (LDPC) codes in the 1990s added much-renewed excitement in the coding community. LDPC codes are interesting because they can approach channel capacity under sub-optimum decoding algorithms whose complexity is linear in the code length. Unsurprisingly, LDPC codes quickly attained their popularity in practical applications such as magnetic storage, wireless and optical communications. One, if not the most, important and challenging problem in LDPC code research is the study and analysis of the error floor phenomenon. This phenomenon is described as an abrupt degradation in the frame error rate performance of LDPC codes in the high signal-to-noise ratio region. Error floor is harmful because its presence prevents the LDPC decoder from reaching very low probability of decoding failure, an important requirement for many applications. Not long after the rediscovery of LDPC codes, scientists established that error floor is caused by certain harmful structures, most commonly known as trapping sets, in the Tanner representation of a code. Since then, the study of error floor mostly consists of three major problems: 1) estimating error floor; 2) constructing LDPC codes with low error floor and 3) designing decoders that are less susceptible to error floor. Although some parts of this dissertation can be used as important elements in error floor estimation, our main contributions are a novel method for constructing LDPC codes with low error floor and a novel class of low complexity decoding algorithms that can collectively alleviate error floor. These contributions are summarized as follows. A method to construct LDPC codes with low error floors on the binary symmetric channel is presented. Codes are constructed so that their Tanner graphs are free of certain small trapping sets. These trapping sets are selected from the Trapping Set Ontology for the Gallager A/B decoder. They are selected based on their relative harmfulness for a given decoding algorithm. We evaluate the relative harmfulness of different trapping sets for the sum-product algorithm by using the topological relations among them and by analyzing the decoding failures on one trapping set in the presence or absence of other trapping sets. We apply this method to construct structured LDPC codes. To facilitate the discussion, we give a new description of structured LDPC codes whose parity-check matrices are arrays of permutation matrices. This description uses Latin squares to define a set of permutation matrices that have disjoint support and to derive a simple necessary and sufficient condition for the Tanner graph of a code to be free of four-cycles. A new class of bit flipping algorithms for LDPC codes over the binary symmetric channel is proposed. Compared to the regular (parallel or serial) bit flipping algorithms, the proposed algorithms employ one additional bit at a variable node to represent its "strength." The introduction of this additional bit allows an increase in the guaranteed error correction capability. An additional bit is also employed at a check node to capture information which is beneficial to decoding. A framework for failure analysis and selection of two-bit bit flipping algorithms is provided. The main component of this framework is the (re)definition of trapping sets, which are the most "compact" Tanner graphs that cause decoding failures of an algorithm. A recursive procedure to enumerate trapping sets is described. This procedure is the basis for selecting a collection of algorithms that work well together. It is demonstrated that decoders which employ a properly selected group of the proposed algorithms operating in parallel can offer high speed and low error floor decoding.