Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Science

A 920-Kilometer Optical Fiber Link for Frequency Metrology at the 19th Decimal Place

Katharina Predehl, Gesine Grosche, S. M. F. Raupach, Stefan Droste, Osama Terra, Jānis Alnis, Thomas Legero, Theodor W. Hänsch, Thomas Udem, Ronald Holzwarth, H. Schnatz

Published Apr 26, 2012• 545 citations
Publisher

Abstract

Optical clocks show unprecedented accuracy, surpassing that of previously available clock systems by more than one order of magnitude. Precise intercomparisons will enable a variety of experiments, including tests of fundamental quantum physics and cosmology and applications in geodesy and navigation. Well-established, satellite-based techniques for microwave dissemination are not adequate to compare optical clocks. Here, we present phase-stabilized distribution of an optical frequency over 920 kilometers of telecommunication fiber. We used two antiparallel fiber links to determine their fractional frequency instability (modified Allan deviation) to 5 × 10(-15) in a 1-second integration time, reaching 10(-18) in less than 1000 seconds. For long integration times τ, the deviation from the expected frequency value has been constrained to within 4 × 10(-19). The link may serve as part of a Europe-wide optical frequency dissemination network.

DOI
10.1126/science.1218442

Related papers

Free-space dissemination of time and frequency with 10−19 instability over 113 km

Qi Shen, Jian-Yu Guan, Ji-Gang Ren +28 more

Abstract Optical clock networks play important roles in various fields, such as precise navigation, redefinition of “second” unit, and gravitational tests. To establish a global-scale optical clock network, it is essential to disseminate time and frequency with a stability of 10^−19 over a long-distance free-space link. However, such attempts were limited to dozens of kilometers in mirror-folded configuration. Here, we take a crucial step toward future satellite-based time-frequency disseminations. By developing the key technologies, including high-power frequency combs, high-stability and high-efficiency optical transceiver systems, and efficient linear optical sampling, we demonstrate free-space time-frequency dissemination over two independent links with femtosecond time deviation, 3 × 10−19 at 10,000 s residual instability and 1.6 × 10^−20 ± 4.3 × 10^−19 offset. This level of the stability retains for an increased channel loss up to 89 dB. Our work can not only be directly used in ground-based application, but also firmly laid the groundwork for future satellite time-frequency dissemination.

arXiv:2203.11272•Nature•Oct 5, 2022•149 citations

Optical fiber link for ultra-stable frequency dissemination and atomic clock comparisons

Anne Amy‐Klein, Nicolas Quintin, N. Chiodo +42 more

The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].

•Jan 1, 2017•0 citations

A 1800-km optical fiber link for metrology, geodesy, and clock comparison

Mario Siciliani de Cumis, Cecilia Clivati, Luigi Santamaria Amato +18 more

Nowadays, optical fiber links are key elements in optical metrology, spectroscopy, quantum communication and geodesy. In geodetic Very Long Baseline Interferometry, a local maser is responsible for providing time and frequency reference at radiotelescope. Here, we present our recent results on frequency dissemination using a coherent fiber link 1800 km long from Turin to Medicina and Matera, Italy. Metrological reference disseminated via fiber link improve the stability of about two order with respect to the local H-maser clocks. This kind of dissemination paves the way to VLBI observation using a remote clock reference on the Italian and European radio observatories.

Optical and Quantum Sensing and Precision Metrology II•Feb 25, 2020•0 citations

High-resolution optical frequency dissemination on a telecommunication network

Anne Amy‐Klein, Olivier Lopez, F. Kéfélian +3 more

We transferred the frequency of an ultrastable laser over a 108-km-long urban fiber link comprising 22 km of an optical communication network fiber simultaneously carrying Internet data traffic. The metrological signal and the digital data signal were transferred over two different frequency channels in a dense wavelength-division multiplexing scheme. The metrological signal was inserted in and extracted from the communication network using bidirectional off-the-shelf optical add-drop multiplexers. The link-induced phase noise was measured and canceled with a round-trip technique using an all-fiber-based interferometer. The compensated link showed an Allan deviation of a few 10−16at one second and below 10−19at 10,000 s This work paves the way to a wide dissemination of ultrastable optical clock signals between distant laboratories via the Internet network.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2009•3 citations

A clock network for geodesy and fundamental science

Christian Lisdat, Gesine Grosche, Nicolas Quintin +32 more

Leveraging the unrivalled performance of optical clocks as key tools for geo-science, for astronomy and for fundamental physics beyond the standard model requires comparing the frequency of distant optical clocks faithfully. Here, we report on the comparison and agreement of two strontium optical clocks at an uncertainty of 5 × 10(-17) via a newly established phase-coherent frequency link connecting Paris and Braunschweig using 1,415 km of telecom fibre. The remote comparison is limited only by the instability and uncertainty of the strontium lattice clocks themselves, with negligible contributions from the optical frequency transfer. A fractional precision of 3 × 10(-17) is reached after only 1,000 s averaging time, which is already 10 times better and more than four orders of magnitude faster than any previous long-distance clock comparison. The capability of performing high resolution international clock comparisons paves the way for a redefinition of the unit of time and an all-optical dissemination of the SI-second.

arXiv:1511.07735•Nature Communications•Aug 9, 2016•480 citations

SI-traceable frequency dissemination at 1572.06 nm in a stabilized fiber network with ring topology

Dominik Husmann, L.-G. Bernier, Mathieu Bertrand +18 more

Frequency dissemination in phase-stabilized optical fiber networks for metrological frequency comparisons and precision measurements are promising candidates to overcome the limitations imposed by satellite techniques. However, in an architecture shared with telecommunication data traffic, network constraints restrict the availability of dedicated channels in the commonly-used C-band. Here, we demonstrate the dissemination of an SI-traceable ultrastable optical frequency in the L-band over a 456 km fiber network with ring topology, in which data traffic occupies the full C-band. We characterize the optical phase noise and evaluate a link instability of 4.7 × 10-16 at 1 s and 3.8 × 10-19 at 2000 s integration time, and a link accuracy of 2 × 10-18. We demonstrate the application of the disseminated frequency by establishing the SI-traceability of a laser in a remote laboratory. Finally, we show that our metrological frequency does not interfere with data traffic in the telecommunication channels. Our approach combines an unconventional spectral choice in the telecommunication L-band with established frequency-stabilization techniques, providing a novel, cost-effective solution for ultrastable frequency-comparison and dissemination, and may contribute to a foundation of a world-wide metrological network.

arXiv:2104.09966•Optics Express•Jul 3, 2021•38 citations
Optical clocks show unprecedented accuracy, surpassing that of previously available clock systems by more than one order of magnitude. Precise intercomparisons will enable a variety of experiments, including tests of fundamental quantum physics and cosmology and applications in geodesy and navigation. Well-established, satellite-based techniques for microwave dissemination are not adequate to compare optical clocks. Here, we present phase-stabilized distribution of an optical frequency over 920 kilometers of telecommunication fiber. We used two antiparallel fiber links to determine their fractional frequency instability (modified Allan deviation) to 5 × 10(-15) in a 1-second integration time, reaching 10(-18) in less than 1000 seconds. For long integration times τ, the deviation from the expected frequency value has been constrained to within 4 × 10(-19). The link may serve as part of a Europe-wide optical frequency dissemination network.
Abstract Optical clock networks play important roles in various fields, such as precise navigation, redefinition of “second” unit, and gravitational tests. To establish a global-scale optical clock network, it is essential to disseminate time and frequency with a stability of 10^−19 over a long-distance free-space link. However, such attempts were limited to dozens of kilometers in mirror-folded configuration. Here, we take a crucial step toward future satellite-based time-frequency disseminations. By developing the key technologies, including high-power frequency combs, high-stability and high-efficiency optical transceiver systems, and efficient linear optical sampling, we demonstrate free-space time-frequency dissemination over two independent links with femtosecond time deviation, 3 × 10−19 at 10,000 s residual instability and 1.6 × 10^−20 ± 4.3 × 10^−19 offset. This level of the stability retains for an increased channel loss up to 89 dB. Our work can not only be directly used in ground-based application, but also firmly laid the groundwork for future satellite time-frequency dissemination.
The transfer of ultra-stable frequencies between distant laboratories is required by many applications from fundamental metrology to high-precision measurements. For that purpose, optical fibre links have been intensively studied over the last decade. They have demonstrated impressive results far beyond the GPS capabilities on distances up to 2000 km, thanks to an active compensation of the fiber propagation noise.Up to now, optical links has been mainly implemented between two labs, when future applications will require the development of metrological fiber networks. Towards this goal, we have developed a few techniques which allow us to distribute the ultrastable optical signal to many users simultaneously. We have designed repeater laser stations, which can be used to build a cascaded link or to distribute the ultrastable signal among two optical links [1]. These stations allow us also to compare the output end signals of two optical links. These versatile stations will be a key-component of the national metrological network currently being developed in France within the Refimeve+ project. To complete the network, we have demonstrated the extraction of the ultrastable signal from a main link and its seeding to a secondary link [2].Optical links are already been successfully used for clocks comparison. Recently we were able to compare the atomic clocks of the French and German National Metrology Institutes through two connected optical links of total length 1415-km [3]. We found that the two fully independent Sr lattice optical clocks at the two sites agreed to better than 5x10-17 limited only by the clocks uncertainties. A fractional statistical uncertainty of 3x10-17 was reached after only 1000 s averaging time, which is 10 times better, and more than four orders of magnitude faster than with any other existing frequency transfer method. The atomic fountain primary frequency standards from the two institutes were also compared and they were found to agree well within their combined uncertainties of a few 10-16 [4].
Nowadays, optical fiber links are key elements in optical metrology, spectroscopy, quantum communication and geodesy. In geodetic Very Long Baseline Interferometry, a local maser is responsible for providing time and frequency reference at radiotelescope. Here, we present our recent results on frequency dissemination using a coherent fiber link 1800 km long from Turin to Medicina and Matera, Italy. Metrological reference disseminated via fiber link improve the stability of about two order with respect to the local H-maser clocks. This kind of dissemination paves the way to VLBI observation using a remote clock reference on the Italian and European radio observatories.
We transferred the frequency of an ultrastable laser over a 108-km-long urban fiber link comprising 22 km of an optical communication network fiber simultaneously carrying Internet data traffic. The metrological signal and the digital data signal were transferred over two different frequency channels in a dense wavelength-division multiplexing scheme. The metrological signal was inserted in and extracted from the communication network using bidirectional off-the-shelf optical add-drop multiplexers. The link-induced phase noise was measured and canceled with a round-trip technique using an all-fiber-based interferometer. The compensated link showed an Allan deviation of a few 10−16at one second and below 10−19at 10,000 s This work paves the way to a wide dissemination of ultrastable optical clock signals between distant laboratories via the Internet network.
Leveraging the unrivalled performance of optical clocks as key tools for geo-science, for astronomy and for fundamental physics beyond the standard model requires comparing the frequency of distant optical clocks faithfully. Here, we report on the comparison and agreement of two strontium optical clocks at an uncertainty of 5 × 10(-17) via a newly established phase-coherent frequency link connecting Paris and Braunschweig using 1,415 km of telecom fibre. The remote comparison is limited only by the instability and uncertainty of the strontium lattice clocks themselves, with negligible contributions from the optical frequency transfer. A fractional precision of 3 × 10(-17) is reached after only 1,000 s averaging time, which is already 10 times better and more than four orders of magnitude faster than any previous long-distance clock comparison. The capability of performing high resolution international clock comparisons paves the way for a redefinition of the unit of time and an all-optical dissemination of the SI-second.
Frequency dissemination in phase-stabilized optical fiber networks for metrological frequency comparisons and precision measurements are promising candidates to overcome the limitations imposed by satellite techniques. However, in an architecture shared with telecommunication data traffic, network constraints restrict the availability of dedicated channels in the commonly-used C-band. Here, we demonstrate the dissemination of an SI-traceable ultrastable optical frequency in the L-band over a 456 km fiber network with ring topology, in which data traffic occupies the full C-band. We characterize the optical phase noise and evaluate a link instability of 4.7 × 10-16 at 1 s and 3.8 × 10-19 at 2000 s integration time, and a link accuracy of 2 × 10-18. We demonstrate the application of the disseminated frequency by establishing the SI-traceability of a laser in a remote laboratory. Finally, we show that our metrological frequency does not interfere with data traffic in the telecommunication channels. Our approach combines an unconventional spectral choice in the telecommunication L-band with established frequency-stabilization techniques, providing a novel, cost-effective solution for ultrastable frequency-comparison and dissemination, and may contribute to a foundation of a world-wide metrological network.