Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Experimental demonstration of single flux quantum logic with resettable latch

Futoshi Furuta, A. Akahori, N. Mori, Tomoyuki Sato, Naoki Takeuchi, H. Hasegawa, Y. Suzuki, Akira Fujimaki, H. Hayakawa

Published Jun 1, 2000• 5 citations
Publisher

Abstract

We report experimental demonstrations of logic functions based on single flux quantum logic with resettable latch (SFQ-RL) logic. SFQ-RL has been proposed as new SFQ logic, which enables us to initialize the whole circuit. This initialization function is essential for the state machine into which conventional SFQ logic is classified, and makes SFQ logic more applicable to a large-scale logic system, such as a processor. In addition, the function can prevent circuits from performing the failed operation caused by a trapped flux in storage loops. The logic consists of three primitives, which can compose any logic function. We have experimentally demonstrated the operation of "half adder" based on SFQ-RL with the bias margin of /spl plusmn/16%. In order to examine the function of initialization, we designed and evaluated a pseudo random sequence generator by numerical simulation. In addition, we experimentally confirmed the initialization of the generator and "circular buffer" with the bias margin of /spl plusmn/20%.

DOI
10.1109/77.848310

Related papers

New logic circuits based on SFQ signals

Futoshi Furuta, Y. Suzuki, E Oya +5 more

We propose new logic circuits based on Single Flux Quantum logic with Resettable Latch (SFQ-RL). This new logic enables us to initialize the whole circuit and realize an inverter easily. This initialization function is needed for general state machines, in addition, suppressing the failed operation caused by a trapped flux in storage loops. SFQ-RL logic consists of three primitives of gates, "Latch (L)-gate", "Copy(C)-gate" and "OR (O)-gate". L-gate is a kind of flip-flop gate. The difference from a conventional RSFQ latch, "RS-FF" is that L-gate can be reset without emitting an output pulse using "Initialize" pulse. Our numerical simulation shows that the bias margin of L-gate is /spl plusmn/8%. C-gate and O-gate correspond to "Splitter" and "Confluence Buffer" in RSFQ logic, respectively. Every logic function can be realized by only the three primitives. We confirmed the operations, "AND" and "OR" with reasonable margins and speeds by the numerical calculation. We have experimentally demonstrated the logic function such as OR based on SFQ-RL logic. We confirmed the normal operation of the gate with the bias margin of /spl plusmn/25.9%.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•8 citations

Design and demonstration of fundamental logic circuits based on a single-flux-quantum gate with a resettable latch

Naoki Takeuchi, A. Akahori, N. Mori +4 more

We have confirmed the importance of the tolerance design for obtaining correct operation in larger-scale Single Flux Quantum (SFQ) logic circuit. Experimental results show that the bias margin of SFQ/dc converter is considerably enhanced by employing tolerance design. The primitives of Single-Flux-Quantum-logic with Ressettable Latch (SFQ-RL) are designed to have high tolerance. As a result, relatively complex circuits based on SFQ-RL including 4-bit Shift Register, 3-Input Majority circuits, binary counter operate correctly with sufficient bias margins. These circuits are fabricated in NEC's standard process using 2.5 kA/cm/sup 2/ Nb/AlOx/Nb junction technology.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•0 citations

Single flux, quantum B flip-flop and its possible applications

Stanislav V. Polonsky, Vasili K. Semenov, Alex F. Kirichenko

We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1994•76 citations

Demonstration of 17 GHz operation of M-code generator based on SFQ with resettable latch

A. Akahori, Naoki Takeuchi, N. Mori +4 more

We have experimentally demonstrated high-speed operation of a maximum code length (M-code) generator using the on-chip-testing system. M-code generator was designed by using Single Flux Quantum with Resettable Latch (SFQ-RL) proposed by us, and fabricated by the NEC standard process. The circuit operates up to 17 GHz correctly, while the bias margin decreases at higher frequencies due to the timing-related errors. This circuit based on SFQ-RL has an advantage that the initialization of the whole circuit can be realized easily. We have also confirmed the "flush" operation that the internal state is initialized simultaneously by one SFQ pulse in SFQ-RL.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•6 citations

Experimental results on single flux quantum logic

S. P. Benz, Charles J. Burroughs, C.A. Hamilton

The authors have optimized the design and calculated the margins for a number of single flux quantum (SFQ) logic elements, including AND, OR, XOR, splitter, DC-to-SFQ converter, and SFQ-to-DC converter. These are the fundamental building blocks necessary to construct more complex logic functions such as the half adder and full adder. Experimental tests of the primary gates, the AND, OR, XOR, and splitter, tests were made by imbedding each test gate between DC-to-SFQ converters at the inputs and SFQ-to-DC converters at the outputs. Automated testing of each circuit was used to determine functionality, optimum bias levels, and margins. The experimental bias current margins for each gate are consistent with the simulations.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•10 citations

Design Method of Single-Flux-Quantum Logic Circuits Using Dynamically Reconfigurable Logic Gates

Shohei Nishimoto, Yuki Yamanashi, Nobuyuki Yoshikawa

In this study, we designed and tested dynamically reconfigurable AND/OR and NAND/NOR single flux quantum (SFQ) logic gates. The measured dc bias margins at low frequency were 99%-126% and 121%-144% for AND/OR and NAND/NOR gates, respectively. The experimentally confirmed maximum operating frequencies of the AND/OR and NAND/NOR gates were 36 and 24 GHz, respectively. We investigated a circuit design method that enables the efficient design of SFQ logic circuits by using dynamically reconfigurable SFQ logic gates. The logic circuits were designed with a small number of gates using the input data pattern dependence of the Boolean function and reconfiguring the dynamically reconfigurable SFQ logic gates. As a case study, we designed and tested a bit-serial SFQ full adder using the investigated circuit design method. Compared with the conventional bit-serial SFQ full adder, the delay of the proposed full adder was reduced by 27%, assuming a clock frequency of 20 GHz. We confirmed correct operation of the adder with a low-speed test.

IEEE Transactions on Applied Superconductivity•Jan 1, 2015•10 citations
We report experimental demonstrations of logic functions based on single flux quantum logic with resettable latch (SFQ-RL) logic. SFQ-RL has been proposed as new SFQ logic, which enables us to initialize the whole circuit. This initialization function is essential for the state machine into which conventional SFQ logic is classified, and makes SFQ logic more applicable to a large-scale logic system, such as a processor. In addition, the function can prevent circuits from performing the failed operation caused by a trapped flux in storage loops. The logic consists of three primitives, which can compose any logic function. We have experimentally demonstrated the operation of "half adder" based on SFQ-RL with the bias margin of /spl plusmn/16%. In order to examine the function of initialization, we designed and evaluated a pseudo random sequence generator by numerical simulation. In addition, we experimentally confirmed the initialization of the generator and "circular buffer" with the bias margin of /spl plusmn/20%.
We propose new logic circuits based on Single Flux Quantum logic with Resettable Latch (SFQ-RL). This new logic enables us to initialize the whole circuit and realize an inverter easily. This initialization function is needed for general state machines, in addition, suppressing the failed operation caused by a trapped flux in storage loops. SFQ-RL logic consists of three primitives of gates, "Latch (L)-gate", "Copy(C)-gate" and "OR (O)-gate". L-gate is a kind of flip-flop gate. The difference from a conventional RSFQ latch, "RS-FF" is that L-gate can be reset without emitting an output pulse using "Initialize" pulse. Our numerical simulation shows that the bias margin of L-gate is /spl plusmn/8%. C-gate and O-gate correspond to "Splitter" and "Confluence Buffer" in RSFQ logic, respectively. Every logic function can be realized by only the three primitives. We confirmed the operations, "AND" and "OR" with reasonable margins and speeds by the numerical calculation. We have experimentally demonstrated the logic function such as OR based on SFQ-RL logic. We confirmed the normal operation of the gate with the bias margin of /spl plusmn/25.9%.
We have confirmed the importance of the tolerance design for obtaining correct operation in larger-scale Single Flux Quantum (SFQ) logic circuit. Experimental results show that the bias margin of SFQ/dc converter is considerably enhanced by employing tolerance design. The primitives of Single-Flux-Quantum-logic with Ressettable Latch (SFQ-RL) are designed to have high tolerance. As a result, relatively complex circuits based on SFQ-RL including 4-bit Shift Register, 3-Input Majority circuits, binary counter operate correctly with sufficient bias margins. These circuits are fabricated in NEC's standard process using 2.5 kA/cm/sup 2/ Nb/AlOx/Nb junction technology.
We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>
We have experimentally demonstrated high-speed operation of a maximum code length (M-code) generator using the on-chip-testing system. M-code generator was designed by using Single Flux Quantum with Resettable Latch (SFQ-RL) proposed by us, and fabricated by the NEC standard process. The circuit operates up to 17 GHz correctly, while the bias margin decreases at higher frequencies due to the timing-related errors. This circuit based on SFQ-RL has an advantage that the initialization of the whole circuit can be realized easily. We have also confirmed the "flush" operation that the internal state is initialized simultaneously by one SFQ pulse in SFQ-RL.
The authors have optimized the design and calculated the margins for a number of single flux quantum (SFQ) logic elements, including AND, OR, XOR, splitter, DC-to-SFQ converter, and SFQ-to-DC converter. These are the fundamental building blocks necessary to construct more complex logic functions such as the half adder and full adder. Experimental tests of the primary gates, the AND, OR, XOR, and splitter, tests were made by imbedding each test gate between DC-to-SFQ converters at the inputs and SFQ-to-DC converters at the outputs. Automated testing of each circuit was used to determine functionality, optimum bias levels, and margins. The experimental bias current margins for each gate are consistent with the simulations.>
In this study, we designed and tested dynamically reconfigurable AND/OR and NAND/NOR single flux quantum (SFQ) logic gates. The measured dc bias margins at low frequency were 99%-126% and 121%-144% for AND/OR and NAND/NOR gates, respectively. The experimentally confirmed maximum operating frequencies of the AND/OR and NAND/NOR gates were 36 and 24 GHz, respectively. We investigated a circuit design method that enables the efficient design of SFQ logic circuits by using dynamically reconfigurable SFQ logic gates. The logic circuits were designed with a small number of gates using the input data pattern dependence of the Boolean function and reconfiguring the dynamically reconfigurable SFQ logic gates. As a case study, we designed and tested a bit-serial SFQ full adder using the investigated circuit design method. Compared with the conventional bit-serial SFQ full adder, the delay of the proposed full adder was reduced by 27%, assuming a clock frequency of 20 GHz. We confirmed correct operation of the adder with a low-speed test.