We propose an experimental procedure, based on homodyne tomography, for measuring the matrix elements of the Liouvillian of optical devices. After describing the proposed experimental setup, we give a numerical Monte-Carlo simulation of the measurement for a laser amplifier.
We describe a novel tool for the quantum characterization of optical devices. The experimental set-up involves a stable reference state that undergoes an unknown quantum transformation and is then revealed by balanced homodyne detection. Through tomographic analysis of the homodyne data we are able to characterize the signal and to estimate parameters of the interaction, such as the loss of an optical component or the gain of an amplifier. We present experimental results for coherent signals, with application to the estimation of losses introduced by simple optical components, and show how these results can be extended to the characterization of more general optical devices.
We propose to test Bell’s inequality through homodyrie tomography. The experimental perimental apparatus is mainly composed of a nondegenerate optical parametric amplifier and four photodiodes. The experimental data are gathered through a self-homodyne scheme and are processed by quantum tomography. Our procedure does not introduce supplementary hypotheses (fair sampling assumption), since we do not need to collect auxiliary data to normalize probabilities. Moreover in the proposed experiment, the minimum value of detector quantum efficiency ηis virtually reduced down to η=.5 (in practice to η∼65∶70%). The feasibility of the experiment is shown by some numerical results based on Monte-Carlo simulations.
Quantum operations describe any state change allowed in quantum mechanics, including the evolution of an open system or the state change due to a measurement. We present a general method based on quantum tomography for measuring experimentally the matrix elements of an arbitrary quantum operation. As input the method needs only a single entangled state. The feasibility of the technique for the electromagnetic field is shown, and the experimental setup is illustrated based on homodyne tomography of a twin beam.
We suggest and demonstrate a tomographic method to characterise homodyne detectors at the quantum level.The positive operator measure associated with the detector is expanded in a quadrature basis and probed with a set of coherent states.The coefficients of the expansion are then retrieved using a least squares algorithm.Our model is general enough to describe different implementations of the homodyne setup, and it has proven capable of effectively describing the detector response to different tomographic sets.We validate the reconstructed operator measure on nonclassical states and exploit results to estimate the overall quantum efficiency of the detector.