Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Margins and yields of SFQ circuits in HTS materials

Donald L. Miller, John X. Przybysz, J.H. Kang

Published Mar 1, 1993• 33 citations
Publisher

Abstract

An analytical model has been developed to project the yield of superconductive integrated circuit chips as a function of circuit operating margins, fabrication process control, and component count. For Gaussian distributed deviations of critical component values from design specifications, chip yield was a highly nonlinear (threshold) function of the ratio of circuit margin to process standard deviation. Computer simulations of single-flux-quantum (SFQ) logic gates with model high-temperature superconductor (HTS) superconductor-normal-metal-superconductor (SNS) junctions operating at GHz clock rates showed at least 50-70% of the margins of similar Nb-Al/sub 2/O/sub 3/-Nb based circuits. Margins and maximum clock rate improved as I/sub c/R/sub n/ (critical-current-normal-resistance product) was increased from 200 to 500 mV.>

DOI
10.1109/77.233991

Related papers

Logic Operation of HTS SFQ Logic Family

Koji Tsubone, Y. Tarutani, H. Wakana +2 more

A high-Tcsuperconducting (HTS) single-flux-quantum (SFQ) logic family including an and gate, an or gate, and an inverter was designed. The circuit parameters were optimized for a Josephson junction's critical current density, which may change due to a temperature change or insufficient run-to-run reproducibility of the fabrication process. New circuit design layout rules were implemented to improve Icx uniformity. As a result, all circuits were successfully tested and show at least plusmn40% critical current density operational margins. An effect of the parasitic capacitance formed by a junction electrode and a ground plane on the operating margins of the and gate was investigated by numerical simulation. Test circuits were fabricated using YBa2Cu3O7-deltaramp-edge junction technology and were operated at temperatures higher than 30 K. Bias current margins were also measured, and they found to be close to the simulated ones.

IEEE Transactions on Applied Superconductivity•Jul 15, 2009•2 citations

Limitations on HTS single flux quantum logic

J.S. Satchell

There is widespread interest in transferring Single Flux Quantum (SFQ) logic from niobium technology to a suitable HTS technology. The higher operating temperature results in increased noise and associated errors. We have developed numerical methods to study noise induced errors and how they depend on circuit parameters. A simple picture holds for all the circuits studied to date. The error probability shows an error function (integrated Gaussian) distribution. The width of the distribution is circuit dependent, but is 1 to 4 times the noise contribution of a single junction, and the noise free (deterministic) margin corresponds to the point where the error probability is 0.5. The distributions are frequently asymmetric, and minimum error rate does not occur for a design centered between the deterministic margins. A stochastic optimizer has been developed that allows us reoptimize circuits for conditions when noise induced margin narrowing is important. We have used this to study the influence of layout induced stray inductance on the feasibility of HTS circuits using the T flip-flop as an example. Stray inductance appears to be as important as junction reproducibility, and significant improvements are needed to allow high operating temperatures.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•23 citations

SFQ-to-level logic conversion by HTS Josephson drivers for output interface

Tsunehiro Hato, Yoshihiro Ishimaru, N. Harada +5 more

Latching-type driver circuits integrated with high-temperature superconductivity (HTS) junctions and two types of resistor were fabricated. These circuits could successfully perform latching operation by means of a single-flux-quantum (SFQ) signal input. Ramp-edge-type HTS junctions were fabricated by interface engineering and showed a hysteretic current-voltage characteristics under a temperature of 50 K. The critical current (I/sub c/) of these 5-micron-wide junctions was about 0.2 mA and the I/sub c/R/sub n/ product was about 1.7 mV at 4.2 K. The circuits included two types of resistors, which were made of RF-magnetron-sputtered indium-tin-oxide (ITO) and Au films. A driver with a parallel 2-junction-stack could convert an SFQ pulse, which was transformed through several Josephson transmission lines (JTL's) from a DC/SFQ circuit, to a 2.3-mV level signal.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•8 citations

Prospect of single flux quantum logic in superconducting digital electronics

J.H. Kang, John X. Przybysz, Donald L. Miller +2 more

This paper presents a study on the merits of single flux quantum (SFQ) logic in superconducting digital electronics. With no requirements for an external RF clock source, the speed of SFQ logic circuits can exceed 100 GHz, orders of magnitude higher than latching logic circuits. Use of overdamped junctions in SFQ circuits makes this logic available for already developed high-Tc junctions. Simulations show the operation of SFQ circuits at above 10 GHz with the junctions having characteristics similar to those of YBa2Cu3O7-x/Au/YBa2Cu3O7-x planar junctions. A similar concept is applied to NbN circuits operable above 10 K. A flip-flop counter using NbN junctions with Vm (1.5 mV)=3 mV and Delta =1.9 mV to model 12 K operation has been successfully simulated up to 5 GHz. Operating margins of only 26% on MVTL shift register were obtained by simulations, which is comparable to the margins for SFQ logic circuits. A counting SFQ analogue-to-digital converter can be improved by using an output buffered quantizer.

Superconductor Science and Technology•Nov 1, 1991•5 citations

Single-flux-quantum circuits utilizing self-shunted NbN/TaN/NbN Josephson junctions grown on silicon substrates

Yulong Zhong, Lu Zhang, Junjie Xie +9 more

Abstract We report on the electrical properties of NbN/TaN/NbN Josephson junctions grown on thermally oxidized silicon substrates, along with the design and fabrication of superconducting single-flux-quantum (SFQ) circuits based on these NbN superconductor/normal metal/superconductor (SNS) junctions. The critical current density ( J c ) of the junctions was found to be relatively sensitive to the barrier thickness, decreasing from 108.0 ± 8.1 kA cm −2 for a 15 nm barrier to 12.8 ± 1.9 kA cm −2 for a 30 nm barrier. For a J c of approximately 24.5 ± 2.1 kA cm −2 and a barrier thickness of 25 nm, the NbN SNS junctions are self-shunted and exhibit nonhysteretic current–voltage ( I – V ) characteristics. Especially for junctions with diameter ( φ ) ranging from 0.8 to 1.6 μ m, their critical current ( I c ) falls within the range of 110–450 μ A, making them suitable for SFQ circuits. By considering the impact of excess current and incorporating it as an additional term in the conventional resistively and capacitively shunted junction model, the I – V curves of NbN SNS junctions can be precisely described, successfully minimizing the deviation between simulations and test results. The DC-SFQ and SFQ-DC interface circuits can both operate normally, and the bias margins of cell circuits such as Josephson transmission line, confluence buffer, D flip-flop, and splitter are greater than 40%. Compared to Nb superconductor/insulator/superconductor junctions, their self-shunting characteristics and relatively thick 25 nm barriers can also enhance the integration of circuits and increase the yield to complex circuits.

Superconductor Science and Technology•Oct 6, 2024•7 citations

20 ${\hbox{kA/cm}}^{2}$ Process Development for Superconducting Integrated Circuits With 80 GHz Clock Frequency

Sergey K. Tolpygo, Daniel T. Yohannes, R. T. Hunt +4 more

Results of the development of an advanced fabrication process for superconductor integrated circuits (ICs) with 20 kA/cm2Nb/AlOx/Nb Josephson junctions is presented. The process has 4 niobium superconducting layers, one MoNxresistor layer with 4.0 Ohm per square sheet resistance for the junction shunting and circuit biasing, and employs circular Josephson junctions with the minimum diameter of 1 mum; total 11 photolithography levels. The goal of this process development is the demonstration of the feasibility of 80 GHz clock speeds in superconducting ICs for digital signal processing (DSP) and high performance computing. Basic components of rapid single flux quantum (RSFQ) logic such as DC/SFQ, SFQ/DC converters, Josephson transmission lines (JTLs), and simple digital circuits such as T-flip-flops and 4-bit digital counters have been fabricated and tested. The T-flip-flops were shown to operate up to 400 GHz with the widest margin of operation of plusmn13% at 325 GHz. Digital testing results on the 4-bit counters as well as the junctions, resistors, and other process parameters are also presented. Prospects for yet higher speeds and very large scale integration are discussed.

IEEE Transactions on Applied Superconductivity•Jun 1, 2007•73 citations
An analytical model has been developed to project the yield of superconductive integrated circuit chips as a function of circuit operating margins, fabrication process control, and component count. For Gaussian distributed deviations of critical component values from design specifications, chip yield was a highly nonlinear (threshold) function of the ratio of circuit margin to process standard deviation. Computer simulations of single-flux-quantum (SFQ) logic gates with model high-temperature superconductor (HTS) superconductor-normal-metal-superconductor (SNS) junctions operating at GHz clock rates showed at least 50-70% of the margins of similar Nb-Al/sub 2/O/sub 3/-Nb based circuits. Margins and maximum clock rate improved as I/sub c/R/sub n/ (critical-current-normal-resistance product) was increased from 200 to 500 mV.>
A high-Tcsuperconducting (HTS) single-flux-quantum (SFQ) logic family including an and gate, an or gate, and an inverter was designed. The circuit parameters were optimized for a Josephson junction's critical current density, which may change due to a temperature change or insufficient run-to-run reproducibility of the fabrication process. New circuit design layout rules were implemented to improve Icx uniformity. As a result, all circuits were successfully tested and show at least plusmn40% critical current density operational margins. An effect of the parasitic capacitance formed by a junction electrode and a ground plane on the operating margins of the and gate was investigated by numerical simulation. Test circuits were fabricated using YBa2Cu3O7-deltaramp-edge junction technology and were operated at temperatures higher than 30 K. Bias current margins were also measured, and they found to be close to the simulated ones.
There is widespread interest in transferring Single Flux Quantum (SFQ) logic from niobium technology to a suitable HTS technology. The higher operating temperature results in increased noise and associated errors. We have developed numerical methods to study noise induced errors and how they depend on circuit parameters. A simple picture holds for all the circuits studied to date. The error probability shows an error function (integrated Gaussian) distribution. The width of the distribution is circuit dependent, but is 1 to 4 times the noise contribution of a single junction, and the noise free (deterministic) margin corresponds to the point where the error probability is 0.5. The distributions are frequently asymmetric, and minimum error rate does not occur for a design centered between the deterministic margins. A stochastic optimizer has been developed that allows us reoptimize circuits for conditions when noise induced margin narrowing is important. We have used this to study the influence of layout induced stray inductance on the feasibility of HTS circuits using the T flip-flop as an example. Stray inductance appears to be as important as junction reproducibility, and significant improvements are needed to allow high operating temperatures.
Latching-type driver circuits integrated with high-temperature superconductivity (HTS) junctions and two types of resistor were fabricated. These circuits could successfully perform latching operation by means of a single-flux-quantum (SFQ) signal input. Ramp-edge-type HTS junctions were fabricated by interface engineering and showed a hysteretic current-voltage characteristics under a temperature of 50 K. The critical current (I/sub c/) of these 5-micron-wide junctions was about 0.2 mA and the I/sub c/R/sub n/ product was about 1.7 mV at 4.2 K. The circuits included two types of resistors, which were made of RF-magnetron-sputtered indium-tin-oxide (ITO) and Au films. A driver with a parallel 2-junction-stack could convert an SFQ pulse, which was transformed through several Josephson transmission lines (JTL's) from a DC/SFQ circuit, to a 2.3-mV level signal.
This paper presents a study on the merits of single flux quantum (SFQ) logic in superconducting digital electronics. With no requirements for an external RF clock source, the speed of SFQ logic circuits can exceed 100 GHz, orders of magnitude higher than latching logic circuits. Use of overdamped junctions in SFQ circuits makes this logic available for already developed high-Tc junctions. Simulations show the operation of SFQ circuits at above 10 GHz with the junctions having characteristics similar to those of YBa2Cu3O7-x/Au/YBa2Cu3O7-x planar junctions. A similar concept is applied to NbN circuits operable above 10 K. A flip-flop counter using NbN junctions with Vm (1.5 mV)=3 mV and Delta =1.9 mV to model 12 K operation has been successfully simulated up to 5 GHz. Operating margins of only 26% on MVTL shift register were obtained by simulations, which is comparable to the margins for SFQ logic circuits. A counting SFQ analogue-to-digital converter can be improved by using an output buffered quantizer.
Abstract We report on the electrical properties of NbN/TaN/NbN Josephson junctions grown on thermally oxidized silicon substrates, along with the design and fabrication of superconducting single-flux-quantum (SFQ) circuits based on these NbN superconductor/normal metal/superconductor (SNS) junctions. The critical current density ( J c ) of the junctions was found to be relatively sensitive to the barrier thickness, decreasing from 108.0 ± 8.1 kA cm −2 for a 15 nm barrier to 12.8 ± 1.9 kA cm −2 for a 30 nm barrier. For a J c of approximately 24.5 ± 2.1 kA cm −2 and a barrier thickness of 25 nm, the NbN SNS junctions are self-shunted and exhibit nonhysteretic current–voltage ( I – V ) characteristics. Especially for junctions with diameter ( φ ) ranging from 0.8 to 1.6 μ m, their critical current ( I c ) falls within the range of 110–450 μ A, making them suitable for SFQ circuits. By considering the impact of excess current and incorporating it as an additional term in the conventional resistively and capacitively shunted junction model, the I – V curves of NbN SNS junctions can be precisely described, successfully minimizing the deviation between simulations and test results. The DC-SFQ and SFQ-DC interface circuits can both operate normally, and the bias margins of cell circuits such as Josephson transmission line, confluence buffer, D flip-flop, and splitter are greater than 40%. Compared to Nb superconductor/insulator/superconductor junctions, their self-shunting characteristics and relatively thick 25 nm barriers can also enhance the integration of circuits and increase the yield to complex circuits.
20 kA/cm2{\hbox{kA/cm}}^{2}kA/cm2 Process Development for Superconducting Integrated Circuits With 80 GHz Clock Frequency
Results of the development of an advanced fabrication process for superconductor integrated circuits (ICs) with 20 kA/cm2Nb/AlOx/Nb Josephson junctions is presented. The process has 4 niobium superconducting layers, one MoNxresistor layer with 4.0 Ohm per square sheet resistance for the junction shunting and circuit biasing, and employs circular Josephson junctions with the minimum diameter of 1 mum; total 11 photolithography levels. The goal of this process development is the demonstration of the feasibility of 80 GHz clock speeds in superconducting ICs for digital signal processing (DSP) and high performance computing. Basic components of rapid single flux quantum (RSFQ) logic such as DC/SFQ, SFQ/DC converters, Josephson transmission lines (JTLs), and simple digital circuits such as T-flip-flops and 4-bit digital counters have been fabricated and tested. The T-flip-flops were shown to operate up to 400 GHz with the widest margin of operation of plusmn13% at 325 GHz. Digital testing results on the 4-bit counters as well as the junctions, resistors, and other process parameters are also presented. Prospects for yet higher speeds and very large scale integration are discussed.