Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Physics B Atomic Molecular and Optical Physics

Applications and implementation of Fourier multiport devices

S Zhang, Chao Lei, Apostol Vourdas, Jacob Dunningham

Published Mar 13, 2006• 10 citations
Publisher

Abstract

Fourier multiport devices in which the creation and annihilation operators at the output are related to those at the input through a finite Fourier transform are studied. A general method for the calculation of the output for arbitrary input states is presented. The case of a squeezed state at one of the inputs and vacua at all other inputs is discussed. In the case of thermal states at the input, the device can be used as a thermometer. A factorization technique inspired by the fast Fourier transform leads to a substantial reduction in the number of beam splitters that are required for the experimental implementation of these devices.

DOI
10.1088/0953-4075/39/7/006

Related papers

Fourier multiport devices

Apostol Vourdas, Jacob Dunningham

A formalism for multiport devices is developed in which the creation and annihilation operators at the output are related with those at the input through a finite Fourier transform. By considering two specific inputs of number states and coherent states, we show how these devices can be used to produce multimode Schr\"odinger cat states and can be combined to create multipath interferometers. We introduce uncertainty relations for the distributions of particles in the input modes and the correlations between the output modes. These allow us to determine how the phase resolution of the output state scales with the number of ports and particles. This scaling is of fundamental interest for schemes that seek to use multipath interferometers for enhanced measurement precision.

Physical Review A•Jan 13, 2005•27 citations

Quantum fast Fourier transform and quantum computation by linear optics

Ronen Barak, Y. Ben-Aryeh

Using the quantum fast Fourier transform in linear optics the input mode annihilation operators {â0,â1,...,âs−1} are transformed into output mode annihilation operators {b̂0,b̂1,...,b̂s−1}. We show how to implement experimentally such transformations based on the Cooley-Tukey algorithm, by the use of beam splitters and phase shifters in a linear optical system. Optical systems implementing 1,2, and 3 qubits discrete Fourier transform (DFT) are described, and a general method for implementing the n-qubit DFT is analyzed. These transformations are used on various input radiation states by which phase estimation and order finding can be computed.

Journal of the Optical Society of America B•Jan 26, 2007•70 citations

Arbitrary optical wave evolution with Fourier transforms and phase masks

Víctor López-Pastor, Jeff S. Lundeen, Florian Marquardt

A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)10.1103/PhysRevLett.73.58], it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the last decades. However, the design of Reck et al. is difficult to scale up to a large number of modes, which would be required for many applications. Here we present a deterministic algorithm that can find an exact and efficient implementation of any unitary transformation, using only Fourier transforms and phase masks. Since Fourier transforms and phase masks are routinely implemented in several optical setups and they do not suffer from some of the scalability issues associated with building extensive meshes of beam splitters, we believe that our design can be useful for many applications in photonics.

arXiv:1912.04721•Optics Express•Oct 20, 2021•57 citations

Quantum state transformations by multiport array beam splitters

Armando Pérez-Leija, Robert Keil, H. M. Moya-Cessa +2 more

We introduce a multiport waveguide array beam-splitter that emulates the action of the angular momentum matrix Jx. Quantum transformations carried out by such devices are discussed and pertinent examples are provided.

Conference on Lasers and Electro-Optics•Jan 1, 2012•0 citations

Fast Fourier transforms and fast Wigner and Weyl functions in large quantum systems

Chao Lei, Apostol Vourdas

Abstract Two methods for fast Fourier transforms are used in a quantum context. The first method is for systems with dimension of the Hilbert space $$D=d^n$$ D = d n with d an odd integer, and is inspired by the Cooley-Tukey formalism. The ‘large Fourier transform’ is expressed as a sequence of n ‘small Fourier transforms’ (together with some other transforms) in quantum systems with d-dimensional Hilbert space. Limitations of the method are discussed. In some special cases, the n Fourier transforms can be performed in parallel. The second method is for systems with dimension of the Hilbert space $$D=d_0...d_{n-1}$$ D = d 0 . . . d n - 1 with $$d_0,...,d_{n-1}$$ d 0 , . . . , d n - 1 odd integers coprime to each other. It is inspired by the Good formalism, which in turn is based on the Chinese reminder theorem. In this case also the ‘large Fourier transform’ is expressed as a sequence of n ‘small Fourier transforms’ (that involve some constants related to the number theory that describes the formalism). The ‘small Fourier transforms’ can be performed in a classical computer or in a quantum computer (in which case we have the additional well known advantages of quantum Fourier transform circuits). In the case that the small Fourier transforms are performed with a classical computer, complexity arguments for both methods show the reduction in computational time from $$\mathcal{O}(D^2)$$ O ( D 2 ) to $$\mathcal{O}(D\log D)$$ O ( D log D ) . The second method is also used for the fast calculation of Wigner and Weyl functions, in quantum systems with large finite dimension of the Hilbert space.

arXiv:2405.05163•The European Physical Journal Plus•May 8, 2024•1 citation

Integrated Multi-port Interferometers

J. Capmany, Daniel Pérez

Integrated multi-port interferometers are the second step in programmable photonics. Initially conceived and designed to implement fixed linear optics unitary transformations between N input and N output ports to support mode transformations in quantum optics, the rapid development of this field and the possibility of applying these structures to other areas stimulated development of devices capable of supporting arbitrary linear transformations by suitable programming and surpassing use in square matrix transformations and unitary operators. This chapter reviews some basic concepts on unitary N×N matrices and then describes in detail the basic design principles and integrated optics implementations of triangular and rectangular designs for multi-port interferometers. It then considers more specific interferometer designs, which do not provide possible implementation of general linear transformations but are optimised for performing important operations, e.g. the Fourier transform. Lastly, it covers the linear universal component, which integrates both universal beam couplers and integrated multi-port interferometers.

Oxford University Press eBooks•Mar 5, 2020•0 citations
Fourier multiport devices in which the creation and annihilation operators at the output are related to those at the input through a finite Fourier transform are studied. A general method for the calculation of the output for arbitrary input states is presented. The case of a squeezed state at one of the inputs and vacua at all other inputs is discussed. In the case of thermal states at the input, the device can be used as a thermometer. A factorization technique inspired by the fast Fourier transform leads to a substantial reduction in the number of beam splitters that are required for the experimental implementation of these devices.
A formalism for multiport devices is developed in which the creation and annihilation operators at the output are related with those at the input through a finite Fourier transform. By considering two specific inputs of number states and coherent states, we show how these devices can be used to produce multimode Schr\"odinger cat states and can be combined to create multipath interferometers. We introduce uncertainty relations for the distributions of particles in the input modes and the correlations between the output modes. These allow us to determine how the phase resolution of the output state scales with the number of ports and particles. This scaling is of fundamental interest for schemes that seek to use multipath interferometers for enhanced measurement precision.
Using the quantum fast Fourier transform in linear optics the input mode annihilation operators {â0,â1,...,âs−1} are transformed into output mode annihilation operators {b̂0,b̂1,...,b̂s−1}. We show how to implement experimentally such transformations based on the Cooley-Tukey algorithm, by the use of beam splitters and phase shifters in a linear optical system. Optical systems implementing 1,2, and 3 qubits discrete Fourier transform (DFT) are described, and a general method for implementing the n-qubit DFT is analyzed. These transformations are used on various input radiation states by which phase estimation and order finding can be computed.
A large number of applications in classical and quantum photonics require the capability of implementing arbitrary linear unitary transformations on a set of optical modes. In a seminal work by Reck et al. [Phys. Rev. Lett.73, 58 (1994)10.1103/PhysRevLett.73.58], it was shown how to build such multiport universal interferometers with a mesh of beam splitters and phase shifters, and this design became the basis for most experimental implementations in the last decades. However, the design of Reck et al. is difficult to scale up to a large number of modes, which would be required for many applications. Here we present a deterministic algorithm that can find an exact and efficient implementation of any unitary transformation, using only Fourier transforms and phase masks. Since Fourier transforms and phase masks are routinely implemented in several optical setups and they do not suffer from some of the scalability issues associated with building extensive meshes of beam splitters, we believe that our design can be useful for many applications in photonics.
Abstract Two methods for fast Fourier transforms are used in a quantum context. The first method is for systems with dimension of the Hilbert space D=dnD=d^nD=dn D = d n with d an odd integer, and is inspired by the Cooley-Tukey formalism. The ‘large Fourier transform’ is expressed as a sequence of n ‘small Fourier transforms’ (together with some other transforms) in quantum systems with d-dimensional Hilbert space. Limitations of the method are discussed. In some special cases, the n Fourier transforms can be performed in parallel. The second method is for systems with dimension of the Hilbert space D=d0...dn−1D=d_0...d_{n-1}D=d0​...dn−1​ D = d 0 . . . d n - 1 with d0,...,dn−1d_0,...,d_{n-1}d0​,...,dn−1​ d 0 , . . . , d n - 1 odd integers coprime to each other. It is inspired by the Good formalism, which in turn is based on the Chinese reminder theorem. In this case also the ‘large Fourier transform’ is expressed as a sequence of n ‘small Fourier transforms’ (that involve some constants related to the number theory that describes the formalism). The ‘small Fourier transforms’ can be performed in a classical computer or in a quantum computer (in which case we have the additional well known advantages of quantum Fourier transform circuits). In the case that the small Fourier transforms are performed with a classical computer, complexity arguments for both methods show the reduction in computational time from O(D2)\mathcal{O}(D^2)O(D2) O ( D 2 ) to O(Dlog⁡D)\mathcal{O}(D\log D)O(DlogD) O ( D log D ) . The second method is also used for the fast calculation of Wigner and Weyl functions, in quantum systems with large finite dimension of the Hilbert space.
Integrated multi-port interferometers are the second step in programmable photonics. Initially conceived and designed to implement fixed linear optics unitary transformations between N input and N output ports to support mode transformations in quantum optics, the rapid development of this field and the possibility of applying these structures to other areas stimulated development of devices capable of supporting arbitrary linear transformations by suitable programming and surpassing use in square matrix transformations and unitary operators. This chapter reviews some basic concepts on unitary N×N matrices and then describes in detail the basic design principles and integrated optics implementations of triangular and rectangular designs for multi-port interferometers. It then considers more specific interferometer designs, which do not provide possible implementation of general linear transformations but are optimised for performing important operations, e.g. the Fourier transform. Lastly, it covers the linear universal component, which integrates both universal beam couplers and integrated multi-port interferometers.