Spectral analysis over an instantaneous bandwidth of 2.4 GHz has been demonstrated utilizing superconductive dispersive delay lines in a chirp-transform configuration. Two-tone resolution of 43 MHz and ±1.2-dB amplitude uniformity were achieved.
Exploiting the high-temperature superconductor YBa/sub 2/Cu/sub 3/O/sub 7-x/ (YBCO), we have extended chirp-transform processing to instantaneously analyze the spectrum of an incoming signal over greater bandwidth than any competing technology. A compact receiver has been developed that can analyze a 3 GHz bandwidth in 120 ns with 110 MHz resolution. The cryogenic YBCO chirp filter and ambient-temperature semiconductor electronics have been space qualified for flight on the US Navy's High-Temperature Superconductivity Space Experiment, a package to be launched on the US Air Force ARGOS scientific satellite.>
We demonstrate the first 10-GHz instantaneous bandwidth radio-frequency spectrum analyzer based on spectral hole burning in Tm/sup 3+/:YAG. It exhibits 10 000 frequency channels and a resolution better than 1 MHz. Thanks to the fast and linear chirping capabilities of the laser used, it has a potential 100% probability of interception and a response time in the millisecond range. Its linear dynamic range of 16 dB is presently essentially limited by the modest amount of optical power available and can be further improved.
A five-bit high-temperature-superconductive digital instantaneous frequency-measurement (DIFM) subsystem has been constructed for the determination of the frequency of unknown signals over a 500 MHz bandwidth, centered on 4 GHz, with a resolution of +/- 7.8 MHz. The subsystem contains a cryogenic section with five discriminator modules utilizing superconductive delay lines, GaAs mixers, and power dividers. With a single-tone cw input between -40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values. This system demonstrates the potential system-level application of high-temperature superconductive electronics in instrumentation, communication, radar, and electronic warfare.
A 5-b high-temperature-superconductive digital instantaneous frequency-measurement (DIFM) subsystem has been constructed for the determination of the frequency of unknown signals over a 500-MHz bandwidth, centered on 4 GHz, with a resolution of +or-7.8 MHz. The subsystem contains a cryogenic section with five discriminator modules using superconductive delay lines, GaAs mixers, and power dividers. The subsystem also has a room-temperature GaAs limiting amplifier and a silicon postprocessor. With a single-tone CW (continuous-wave) input between -40 dBm and +10 dBm, the frequency quantization boundaries of the subsystem are, on average, 3.1 MHz from their design values.>