Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Transverse effects in optical bistability and superfluorescence

Edward Watson

Published Jan 1, 1982• 1 citation
OpenAlex

Abstract

Abstract : The interaction of a light beam with matter has varying degrees of dependence on the transverse profile of the beam. Two topics are considered here. The first topic, superfluorescence, involves the coherent emission generated by an initially inverted two-level medium. Calculations in the past have included either quantum fluctuations in the initial conditions or transverse effects, but never both. The calculations presented here include both transverse effects and quantum fluctuations. The results of the theoretical calculations are in good agreement with previous experimental results, both quantitatively in terms of time delay averages and distributions and also qualitatively in terms of pulse shapes. The second topic considered, optical bistability, involves devices which exhibit two stable output light intensities (a high and a low branch) over a limited range of input light intensities. Simulations performed here show the effect of diffraction, measured in terms of the Fresnel number, on how much of the device becomes bistable. It was found that for small Fresnel number cases, the entire device become bistable. For high Fresnel number cases, only part of the device becomes bistable while the rest of the device remains low transmitting. The results of an experiment performed are consistent with the simulations. (Author)

Related papers

Transverse and quantum effects in light control by light; (A) parallel beams: Pump dynamics for three level superfluorescence; and (B) counterflow beams: An algorithm for transverse, full transient effects in optical bi-stability in a Fabryperot cavity

F. P. Mattar

Abstract : Computational methodologies were developed to treat rigorously (1) transverse boundary in an inverted (amplifying) media; (2) to treat quantum fluctuations in an initial boundary condition in the light-matter interactions problem; (3) construct a two-laser three-level code to study light control by light effect; (4) construction of a data base that (a) would manage the production of different types of laser calcualtions: cylindrical, cylindrical with atomic frequency broadening, cartesian geometry; (all of the above with quantum mechanical initiation), (b) allow parametric comparison within the same type of calculations, by establishing a unifying protocol of software storage, of the various refinements of the model could be contrasted among themselves and with experiment; (5) construct an algorithm for counterbeam transient studies for optical bistability and optical oscillator studies. (A) Transverse propagation effects in an inverted medium were studied. Special care had to be taken to treat the boundary reflection conditions. If ill-posed, they can obscure the emergence of any new physical results. The two transverse effects considered are (1) the 'spatial averaging' associated with the inial atomic inversion density being radially dependent (since the pump which inverts the sample has typically a Gaussian-like profile); and (2) the 'diffraction coupling' (which permits the various parts of the cylindrical cross-section to communicate, interact and emit at the same time). The first effect is important for large Fresnel numbers, whereas the second predominant for small Fresnel numbers.

Final Report•Jan 1, 1983•0 citations

Quantum fluctuations and transverse effects in superfluorescence

E. A. Watson, H. M. Gibbs, F. P. Mattar +4 more

Superfluorescence emission profiles are computed using one-way coupled Maxwell-Bloch equations. Transverse effects are included in the full three-spatial-dimension case as well as in the cylindrical-symmetry case. Initiating quantum fluctuations are approximated by a random polarization source with a completely random phase and root-mean-square tipping angle of $\frac{2}{\sqrt{N}}$, where $N$ is the number of atoms in each volume element. These fluctuations reduce the tail of the output obtained with transverse effects alone. In fact, the fluctuations in output pulse shapes encompass the Cs data of Gibbs, Vrehen, and Hikspoors. The standard deviation for the delay time is found to be (12.5\ifmmode\pm\else\textpm\fi{}4)% for Fresnel number of 0.8 compared with the value (10\ifmmode\pm\else\textpm\fi{}2)% recently measured by Vrehen and der Weduwe, also for Cs. Inhomogeneous-broadening effects are also included in some simulations.

Physical Review A•Mar 1, 1983•49 citations

Transverse effects in intrinsic optical bistability

Michael Scalora, Joseph W. Haus

Electromagnetic wave propagation with one transverse dimension is investigated in a medium whose response is modeled by a nonlinear oscillator. We report results with transverse effects due to diffraction, which are controlled by varying the Fresnel number. We find that diffraction does not significantly reduce the bistable intensity characteristics either for the center of the beam intensity or in the intensity integrated across the transverse coordinate, although in the latter case the contrast is reduced; bistable behavior is found to persist even for a Fresnel number of order unity, and the switching intensity is not affected by the Fresnel number. These results are explained by simple physical arguments.

Journal of the Optical Society of America B•Sep 1, 1989•12 citations

Coherent pump dynamics, propagation, transverse, and diffraction effects in three-level superfluorescence and control of light by light

F. P. Mattar, C. M. Bowden

A model is presented for the dynamical evolution of superfluorescence from an optically pumped three-level system. The full propagation, transverse, and diffraction effects are taken into account. With the use of a previously developed algorithm, a computational simulation was constructed from this model and results are presented and discussed. In particular, it is shown that the injected coherent pump-pulse initial characteristics, such as on-axis area, temporal and radial width and shape, can have significant deterministic effects on the superfluorescent pulse delay time, peak intensity, temporal width, and shape. Thus, by specifying certain initial properties of the injected pump pulse, the superfluorescent pulse can be shaped and altered. The results predict the conditions under which an injected light pulse of a given frequency can be used to generate, shape, and control a second light pulse of a different frequency via a nonlinear medium, thus demonstrating a new aspect of the phenomenon of light control by light.

Physical Review A•Jan 1, 1983•26 citations

Transverse effects in intrinsic optical bistability

Michael Scalora, Joseph W. Haus, C. M. Bowden

A nonlinear oscillator model is used as a prototypical medium for intrinsic optical bistability.1 The phenomenon of intrinsic optical bistability is so named because the medium does not require the optical feedback of a cavity. In this model we retain dispersive effects and introduce a diffractive coupling of the electromagnetic field amplitude. The threshold of the optical bistable device is insensitive to the Fresnel number, which determines the coupling between field amplitudes at different transverse positions.2 This is useful for obtaining reproducible operating characteristics of an array of devices. The medium can be introduced inside a cavity to understand the role of dispersive and diffractive effects in a more fundamental way. The threshold intensity is again insensitive to the Fresnel number. Furthermore, we observe instabilities in the cavity configuration, but no chaotic solutions were found. The periodic instabilities are sensitive functions of the Fresnel number.

Annual Meeting Optical Society of America•Jan 1, 1989•0 citations

Transverse optical bistabilities and instabilities

Martine Le Berre, Elisabeth Ressayre, Andree A. Tallet +2 more

A transverse optical bistability is defined here as a bistability that would not occur with a plane-wave input, i.e., it depends crucially upon the radial variations in the input. Such bistabilities are characterized by much more pronounced changes in transverse profiles than in total transmission. An optical cavity is not required, making such systems good candidates for continuous wave studies of delayed-feedback instabilities which require a round-trip time longer than the medium response time. Trapping bistability and diffraction-free-encoding bistability are two limiting cases of transverse optical bistabilities. Trapping bistability occurs only for a long self-focusing nonlinear medium and arises from self-trapping of a single beam with a single feedback mirror or from cross trapping of two counterpropagating beams. In the diffraction-free-encoding case, diffraction is negligible through the portion of the nonlinear medium performing the encoding, but it is significant through any remaining medium and in the free-space propagation to the mirror and back. This paper is organized as follows: The physics of transverse optical bistabilities is summarized in Section I. Theoretical models are presented in Section II. A thin-sample-encoding (TSE) rings model is defined and shown not only to predict transverse bistability but also to account for the interference rings observed to accompany TSE bistability; it also yields delayed-feedback instabilities with a rich bifurcation sequence. Transverse bistability using a short length of sodium vapor is reported under TSE and DFE conditions in Section III. Recently it was discovered that TSE bistability has been seen only when the feedback beam is displaced from the input by about one beam diameter at the sodium. It remains to be determined just how much the nonconcentric feedback assists the concentric bistability predicted by the TSE rings model. A delayed-feedback instability with a period of twice the round-trip time is also seen.

IEEE Journal of Quantum Electronics•Sep 1, 1985•18 citations
Abstract : The interaction of a light beam with matter has varying degrees of dependence on the transverse profile of the beam. Two topics are considered here. The first topic, superfluorescence, involves the coherent emission generated by an initially inverted two-level medium. Calculations in the past have included either quantum fluctuations in the initial conditions or transverse effects, but never both. The calculations presented here include both transverse effects and quantum fluctuations. The results of the theoretical calculations are in good agreement with previous experimental results, both quantitatively in terms of time delay averages and distributions and also qualitatively in terms of pulse shapes. The second topic considered, optical bistability, involves devices which exhibit two stable output light intensities (a high and a low branch) over a limited range of input light intensities. Simulations performed here show the effect of diffraction, measured in terms of the Fresnel number, on how much of the device becomes bistable. It was found that for small Fresnel number cases, the entire device become bistable. For high Fresnel number cases, only part of the device becomes bistable while the rest of the device remains low transmitting. The results of an experiment performed are consistent with the simulations. (Author)
Abstract : Computational methodologies were developed to treat rigorously (1) transverse boundary in an inverted (amplifying) media; (2) to treat quantum fluctuations in an initial boundary condition in the light-matter interactions problem; (3) construct a two-laser three-level code to study light control by light effect; (4) construction of a data base that (a) would manage the production of different types of laser calcualtions: cylindrical, cylindrical with atomic frequency broadening, cartesian geometry; (all of the above with quantum mechanical initiation), (b) allow parametric comparison within the same type of calculations, by establishing a unifying protocol of software storage, of the various refinements of the model could be contrasted among themselves and with experiment; (5) construct an algorithm for counterbeam transient studies for optical bistability and optical oscillator studies. (A) Transverse propagation effects in an inverted medium were studied. Special care had to be taken to treat the boundary reflection conditions. If ill-posed, they can obscure the emergence of any new physical results. The two transverse effects considered are (1) the 'spatial averaging' associated with the inial atomic inversion density being radially dependent (since the pump which inverts the sample has typically a Gaussian-like profile); and (2) the 'diffraction coupling' (which permits the various parts of the cylindrical cross-section to communicate, interact and emit at the same time). The first effect is important for large Fresnel numbers, whereas the second predominant for small Fresnel numbers.
Superfluorescence emission profiles are computed using one-way coupled Maxwell-Bloch equations. Transverse effects are included in the full three-spatial-dimension case as well as in the cylindrical-symmetry case. Initiating quantum fluctuations are approximated by a random polarization source with a completely random phase and root-mean-square tipping angle of 2N\frac{2}{\sqrt{N}}N​2​, where NNN is the number of atoms in each volume element. These fluctuations reduce the tail of the output obtained with transverse effects alone. In fact, the fluctuations in output pulse shapes encompass the Cs data of Gibbs, Vrehen, and Hikspoors. The standard deviation for the delay time is found to be (12.5\ifmmode\pm\else\textpm\fi{}4)% for Fresnel number of 0.8 compared with the value (10\ifmmode\pm\else\textpm\fi{}2)% recently measured by Vrehen and der Weduwe, also for Cs. Inhomogeneous-broadening effects are also included in some simulations.
Electromagnetic wave propagation with one transverse dimension is investigated in a medium whose response is modeled by a nonlinear oscillator. We report results with transverse effects due to diffraction, which are controlled by varying the Fresnel number. We find that diffraction does not significantly reduce the bistable intensity characteristics either for the center of the beam intensity or in the intensity integrated across the transverse coordinate, although in the latter case the contrast is reduced; bistable behavior is found to persist even for a Fresnel number of order unity, and the switching intensity is not affected by the Fresnel number. These results are explained by simple physical arguments.
A model is presented for the dynamical evolution of superfluorescence from an optically pumped three-level system. The full propagation, transverse, and diffraction effects are taken into account. With the use of a previously developed algorithm, a computational simulation was constructed from this model and results are presented and discussed. In particular, it is shown that the injected coherent pump-pulse initial characteristics, such as on-axis area, temporal and radial width and shape, can have significant deterministic effects on the superfluorescent pulse delay time, peak intensity, temporal width, and shape. Thus, by specifying certain initial properties of the injected pump pulse, the superfluorescent pulse can be shaped and altered. The results predict the conditions under which an injected light pulse of a given frequency can be used to generate, shape, and control a second light pulse of a different frequency via a nonlinear medium, thus demonstrating a new aspect of the phenomenon of light control by light.
A nonlinear oscillator model is used as a prototypical medium for intrinsic optical bistability.1 The phenomenon of intrinsic optical bistability is so named because the medium does not require the optical feedback of a cavity. In this model we retain dispersive effects and introduce a diffractive coupling of the electromagnetic field amplitude. The threshold of the optical bistable device is insensitive to the Fresnel number, which determines the coupling between field amplitudes at different transverse positions.2 This is useful for obtaining reproducible operating characteristics of an array of devices. The medium can be introduced inside a cavity to understand the role of dispersive and diffractive effects in a more fundamental way. The threshold intensity is again insensitive to the Fresnel number. Furthermore, we observe instabilities in the cavity configuration, but no chaotic solutions were found. The periodic instabilities are sensitive functions of the Fresnel number.
A transverse optical bistability is defined here as a bistability that would not occur with a plane-wave input, i.e., it depends crucially upon the radial variations in the input. Such bistabilities are characterized by much more pronounced changes in transverse profiles than in total transmission. An optical cavity is not required, making such systems good candidates for continuous wave studies of delayed-feedback instabilities which require a round-trip time longer than the medium response time. Trapping bistability and diffraction-free-encoding bistability are two limiting cases of transverse optical bistabilities. Trapping bistability occurs only for a long self-focusing nonlinear medium and arises from self-trapping of a single beam with a single feedback mirror or from cross trapping of two counterpropagating beams. In the diffraction-free-encoding case, diffraction is negligible through the portion of the nonlinear medium performing the encoding, but it is significant through any remaining medium and in the free-space propagation to the mirror and back. This paper is organized as follows: The physics of transverse optical bistabilities is summarized in Section I. Theoretical models are presented in Section II. A thin-sample-encoding (TSE) rings model is defined and shown not only to predict transverse bistability but also to account for the interference rings observed to accompany TSE bistability; it also yields delayed-feedback instabilities with a rich bifurcation sequence. Transverse bistability using a short length of sodium vapor is reported under TSE and DFE conditions in Section III. Recently it was discovered that TSE bistability has been seen only when the feedback beam is displaced from the input by about one beam diameter at the sodium. It remains to be determined just how much the nonconcentric feedback assists the concentric bistability predicted by the TSE rings model. A delayed-feedback instability with a period of twice the round-trip time is also seen.