Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Phase and Amplitude Modulator for Microwave Pulse Generation

Gordie Brummer, Rizwan Rafique, Thomas Ohki

Published Dec 9, 2010• 7 citations
Publisher

Abstract

We present a microwave amplitude/phase modulation device based on superconducting resonator and synthetic transmission line technology. The primary benefits of this device are agile frequency response for modulation over a 2 GHz bandwidth, low power dissipation and potential for integration with superconducting qubits and high-speed SFQ logic. This device demonstrates phase modulation of$>90^{\circ}$, and amplitude modulation of$\approx 30\ {\rm dB}$in a 2 GHz local oscillator bandwidth. We also show modulation of a 3.5 GHz microwave signal by a Gaussian pulse with$\sigma\approx 4\ {\rm ns}$. The targeted application of this technology is for low power microwave pulse generation for qubit applications. In this paper we present results for the modulator and introduce potential applications in quantum computing.

DOI
10.1109/tasc.2010.2091485

Related papers

Pulse-Density-Modulated Microwave Generator Using Single-Flux-Quantum Circuits for Controlling Qubits

Akira Kunihiro, Yuki Yamanashi, Nobuyuki Yoshikawa

Superconducting qubits are generally controlled by irradiation with microwave pulses. We propose a 5-GHz-range microwave pulse generator based on pulse density modulation for controlling qubits using single-flux-quantum (SFQ) circuits. The proposed microwave pulse generator comprises a 100-GHz circular shift register and a band-pass filter (BPF). In this study, we investigated the relationship between the target envelope of the microwave amplitude and the SFQ pulse density based on the transfer function for the BPF and the frequency spectrum of an SFQ pulse. We implemented a 64-bit circular shift register and demonstrated its operation up to 68 GHz.

IEEE Transactions on Applied Superconductivity•Mar 10, 2023•3 citations

Josephson junction microwave modulators for qubit control

O. Naaman, J. A. Strong, D. G. Ferguson +3 more

We demonstrate Josephson junction based double-balanced mixer and phase shifter circuits operating at 6–10 GHz and integrate these components to implement both a monolithic amplitude/phase vector modulator and an I/Q quadrature mixer. The devices are actuated by flux signals, dissipate no power on chip, exhibit input saturation powers in excess of 1 nW, and provide cryogenic microwave modulation solutions for integrated control of superconducting qubits.

arXiv:1610.07987•Journal of Applied Physics•Feb 21, 2017•35 citations

Amplitude-controllable microwave pulse generator using single-flux-quantum pulse pairs for qubit control

Hongxiang Shen, Naoki Takeuchi, Yuki Yamanashi +1 more

Abstract To achieve large-scale quantum processors, cryogenic quantum-bit (qubit) interface circuits that can control qubits inside a dilution refrigerator are indispensable. Superconducting single-flux quantum (SFQ) circuits are a promising building block for qubit interface circuits because SFQ circuits can operate with high clock frequencies and low power dissipation. In the present study, we developed an SFQ-based qubit interface circuit that we refer to as a pulse-pair microwave pulse generator (PP-MPG). The PP-MPG can generate microwave pulses for qubit control, with the microwave amplitude controlled based on the delay between paired SFQ pulses. By finely adjusting the delay with delay controlling circuits, the microwave amplitude can be controlled over a wide range. We fabricated a PP-MPG chip and tested it at 4.2 K, showing that the microwave amplitude can be controlled over a range of approximately 30 dB. Our results show that the PP-MPG has the potential for use in future large-scale quantum processors.

Superconductor Science and Technology•Jul 19, 2023•11 citations

Towards quantum-noise limited multiplexed microwave readout of qubits

Kevin P. O’Brien, Chris Macklin, David J. Hover +5 more

Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.

IEEE MTT-S International Microwave Symposium digest•May 1, 2016•2 citations

Coherent microwave comb generation via the Josephson effect

Angelo Greco, Xavier Ballu, Francesco Giazotto +1 more

Frequency combs represent exceptionally precise measurement tools due to the coherence of their spectral lines. While optical frequency comb sources constitute a well-established technology, superconducting circuits provide a relatively unexplored on-chip platform for low-dissipation comb emitters able to span from gigahertz to terahertz frequencies. We demonstrate coherent microwave frequency comb generation by leveraging the ac Josephson effect in a superconducting quantum interference device. A time-dependent magnetic drive periodically generates voltage pulses, which in the frequency domain correspond to a comb with dozens of spectral modes here reported up to mode 46. The emitted power at the device level ranges from -170 dBm to -130 dBm per harmonic, corresponding to 40 dB dynamic range in the 4-8 GHz bandwidth. The micrometer-scale footprint and minimal dissipation inherent to superconducting systems foster the integration of our comb generator with advanced cryogenic electronics. Transferring optical techniques to the solid-state domain may enable new applications in quantum technologies.

arXiv:2503.13259•Nature Communications•Feb 20, 2026•3 citations

Implementation of SFQ Microwave Choppers for Controlling Quantum Bits

Shu Miura, Naoki Takeuchi, Yuki Yamanashi +1 more

In order to control the state of qubits by a microwave pulse, the irradiation time and the amplitude have to be controlled precisely. We have developed a single-flux-quantum (SFQ) microwave chopper for high-speed switching of microwave pulses. The proposed chopper is composed of a DC/SFQ convertor, an SFQ switch, a PTL driver, and a superconducting low-pass filter (LPF). The chopper converts an input microwave, which is generated by an external microwave generator at the room temperature, into microwave pulses by using start/stop SFQ control signals. We designed and implemented a microwave chopper module, which can be attached to dilution refrigerators. SFQ chips were fabricated using the ISTEC 2.5 kA/cm2 Nb process. We tested the microwave chopper module at 4.2 K, and demonstrated that a 5-GHz microwave whose amplitude ranging from 0 μV to 150 μV can be chopped by the SFQ control signals.

Physics Procedia•Jan 1, 2012•3 citations
We present a microwave amplitude/phase modulation device based on superconducting resonator and synthetic transmission line technology. The primary benefits of this device are agile frequency response for modulation over a 2 GHz bandwidth, low power dissipation and potential for integration with superconducting qubits and high-speed SFQ logic. This device demonstrates phase modulation of>90∘>90^{\circ}>90∘, and amplitude modulation of≈30 dB\approx 30\ {\rm dB}≈30 dBin a 2 GHz local oscillator bandwidth. We also show modulation of a 3.5 GHz microwave signal by a Gaussian pulse withσ≈4 ns\sigma\approx 4\ {\rm ns}σ≈4 ns. The targeted application of this technology is for low power microwave pulse generation for qubit applications. In this paper we present results for the modulator and introduce potential applications in quantum computing.
Superconducting qubits are generally controlled by irradiation with microwave pulses. We propose a 5-GHz-range microwave pulse generator based on pulse density modulation for controlling qubits using single-flux-quantum (SFQ) circuits. The proposed microwave pulse generator comprises a 100-GHz circular shift register and a band-pass filter (BPF). In this study, we investigated the relationship between the target envelope of the microwave amplitude and the SFQ pulse density based on the transfer function for the BPF and the frequency spectrum of an SFQ pulse. We implemented a 64-bit circular shift register and demonstrated its operation up to 68 GHz.
Abstract To achieve large-scale quantum processors, cryogenic quantum-bit (qubit) interface circuits that can control qubits inside a dilution refrigerator are indispensable. Superconducting single-flux quantum (SFQ) circuits are a promising building block for qubit interface circuits because SFQ circuits can operate with high clock frequencies and low power dissipation. In the present study, we developed an SFQ-based qubit interface circuit that we refer to as a pulse-pair microwave pulse generator (PP-MPG). The PP-MPG can generate microwave pulses for qubit control, with the microwave amplitude controlled based on the delay between paired SFQ pulses. By finely adjusting the delay with delay controlling circuits, the microwave amplitude can be controlled over a wide range. We fabricated a PP-MPG chip and tested it at 4.2 K, showing that the microwave amplitude can be controlled over a range of approximately 30 dB. Our results show that the PP-MPG has the potential for use in future large-scale quantum processors.
Coherent circuits based on superconducting elements hold tremendous promise for the practical implementation of quantum information technology: advanced computation, cryptography, and hardware simulation of complex materials systems are envisioned applications. Such circuits are essentially engineered atoms with level transitions in the 4-8 GHz regime; as such “read” and “write” operations are performed with the aid of fast microwave pulses and low-noise amplifiers, respectively. Recent advances in cavity-based superconducting parametric amplifiers have enabled real-time measurement and feedback in one and two qubits. We demonstrate a novel Josephson junction transmission-line based traveling-wave amplifier which employs sub-wavelength phase matching resonators to achieve high gain, several GHz of bandwidth, and near quantum-noise limited performance. Such devices will enable multiplexed qubit readout in integrated architectures comprised of a variety of microwave frequency analog and digital superconducting technologies: signal sources, multiplexers, ADCs, DACs, mixers, and amplifiers.
Frequency combs represent exceptionally precise measurement tools due to the coherence of their spectral lines. While optical frequency comb sources constitute a well-established technology, superconducting circuits provide a relatively unexplored on-chip platform for low-dissipation comb emitters able to span from gigahertz to terahertz frequencies. We demonstrate coherent microwave frequency comb generation by leveraging the ac Josephson effect in a superconducting quantum interference device. A time-dependent magnetic drive periodically generates voltage pulses, which in the frequency domain correspond to a comb with dozens of spectral modes here reported up to mode 46. The emitted power at the device level ranges from -170 dBm to -130 dBm per harmonic, corresponding to 40 dB dynamic range in the 4-8 GHz bandwidth. The micrometer-scale footprint and minimal dissipation inherent to superconducting systems foster the integration of our comb generator with advanced cryogenic electronics. Transferring optical techniques to the solid-state domain may enable new applications in quantum technologies.
In order to control the state of qubits by a microwave pulse, the irradiation time and the amplitude have to be controlled precisely. We have developed a single-flux-quantum (SFQ) microwave chopper for high-speed switching of microwave pulses. The proposed chopper is composed of a DC/SFQ convertor, an SFQ switch, a PTL driver, and a superconducting low-pass filter (LPF). The chopper converts an input microwave, which is generated by an external microwave generator at the room temperature, into microwave pulses by using start/stop SFQ control signals. We designed and implemented a microwave chopper module, which can be attached to dilution refrigerators. SFQ chips were fabricated using the ISTEC 2.5 kA/cm2 Nb process. We tested the microwave chopper module at 4.2 K, and demonstrated that a 5-GHz microwave whose amplitude ranging from 0 μV to 150 μV can be chopped by the SFQ control signals.