Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Information Theory (ISIT)

Dynamic scheduling-aided decoding strategies for LDPC convolutional codes with rational parity-check matrices

Jian-Jia Weng, Mu‐Chen Wu, Chung-Hsuan Wang, Yi-Sheng Su, Tsung-Cheng Wu

Published Jul 1, 2011• 1 citation
Publisher

Abstract

In this paper, decoding of LDPC convolutional codes with rational parity-check matrices (LDPC-CC-RPCM) is investigated. We show that Tanner graph of every LDPC-CC-RPCM can always be transformed into an equivalent one with enlarged girth and finite memory order suitable for practical pipeline decoder. Based on the transformed graph, a dynamic scheduling-aided decoding scheme with the enhancement of signal perturbation and error cancellation is presented to improve the convergence speed and bit-error-rate performance in both of the waterfall and error-floor regions. Simulation results also reveal that LDPC-CC-RPCM may outperform ordinary LDPC-CC with polynomial parity-check matrices in some cases under the same code rate and decoding complexity.

DOI
10.1109/isit.2011.6033864

Related papers

Decoding of LDPC convolutional codes with rational parity-check matrices from a new graphical perspective

Jian-Jia Weng, Chih-Chieh Lai, Chung-Hsuan Wang

Previous studies on low-density parity-check convolutional codes (LDPC-CC) reveal that LDPC-CC with rational parity-check matrices (RPCM) suffer from the unaffordable decoding latency/complexity due to the infinite memory order and the poor bit-error-rate performance due to the existence of length-4 cycles in the Tanner graph. However, in this paper, we show that every LDPC-CC with RPCM can be associated with an equivalent Tanner graph which can avoid the infinite memory order and undesired short length cycles but still implements the same constraints specified by the RPCM. Together with the iterative decoding based on belief propagation with proper scheduling, simulation results indicate that LDPC-CC with RPCM can also provide satisfactory decoding performance.

IEEE International Symposium on Information Theory (ISIT)•Jun 1, 2010•4 citations

Dynamic Scheduling Decoding of LDPC Codes Based on Tabu Search

Xingcheng Liu, Chunlei Fan, Xuechen Chen

The informed dynamic scheduling (IDS) strategy decoding algorithms performed exceptionally well for low-density parity-check codes in terms of the error-rate performance. However, the IDS decoding algorithm is greedy because of the unfair computation resources allocation among different variables nodes, which leads to poor convergence performance. In order to reduce the greediness of the IDS algorithm, the tabu search (TS) algorithm is introduced to the dynamic scheduling-based decoding in this paper. In the TS-based dynamic scheduling (TSDS) algorithm, the variable nodes in the Tanner graph are temporarily stored in a tabu list. In the decoding process with the TSDS algorithm, variable nodes stored in the tabu list will not be selected and updated until they are shifted out of the tabu list. Besides, an improved updating order is provided for the TSDS algorithm, by which the computational complexity can be decreased without the loss of error correction performance. Simulation results show that the proposed algorithm outperforms other decoding algorithms of interest in terms of bit error rate and convergence performance over the additive white Gaussian noise channel.

IEEE Transactions on Communications•Jul 28, 2017•14 citations

Decoding low-density parity-check codes with probabilistic schedule

Yongyi Mao, Amir H. Banihashemi

The best known practical algorithm for the decoding of low-density parity-check (LDPC) codes is the iterative sum-product or belief propagation algorithm, operating on a Tanner graph (TG) of the code. Conventionally, in each iteration, all the symbol nodes and subsequently all the check nodes in the TG pass new messages to their neighbors (the so-called "flooding schedule"). We propose a new message-passing schedule, called "probabilistic schedule." Unlike flooding, the probabilistic schedule operates based on the structure of the TG, and probabilistically balances the frequency at which different symbol nodes update their outgoing messages in accordance with their girths. Our results show that, particularly for short block lengths, the new schedule offers a much better performance/complexity trade-off. For a particular example of a (1268,456) code, at no cost in complexity, the probabilistic schedule not only decreases both the bit and message error rates by an order of magnitude, but also reduces the number of undetected errors considerably. This work shows the importance of scheduling in the performance of iterative decoding algorithms and suggests that a schedule which matches the structure of the TG can substantially improve the performance/complexity trade-off in the decoding of short LDPC codes.

IEEE Pacific Rim Conference on Communications, Computers and Signal Processing (PACRIM)•Nov 13, 2002•13 citations

A new schedule for decoding low-density parity-check codes

Yongyi Mao, Amir H. Banihashemi

The best known practical algorithm for the decoding of low-density parity-check (LDPC) codes is the iterative sum-product or belief propagation algorithm, operating on a Tanner graph (TG) of the code. Conventionally, in each iteration, all the symbol nodes and subsequently all the check nodes in the TG pass new messages to their neighbors (the so-called "flooding schedule"). We propose a new message-passing schedule, called "probabilistic schedule". Unlike flooding, the probabilistic schedule operation is based on the structure of the TG, and probabilistically balances the frequency at which different symbol nodes update their outgoing messages in accordance with their girths. Our results show that, particularly for short block lengths, the new schedule offers a much better performance/complexity trade-off. For a particular example of a (1268, 456) code, at no cost in complexity, the probabilistic schedule not only decreases both the bit and message error rates by an order of magnitude, but also reduces the number of undetected errors considerably. This work shows the importance of scheduling in the performance of iterative decoding algorithms and suggests that a schedule which matches the structure of the TG can substantially improve the performance/complexity trade-off in the decoding of short LDPC codes.

Globecom•Nov 13, 2002•9 citations

A survey on decoding schedules of LDPC convolutional codes and associated hardware architectures

Hayfa Ben Thameur, Bertrand Le Gal, Nadia Khouja +2 more

Low-density parity-check convolutional codes (LDPC-CC) have interesting error correction features. They have a great potential to become a key error-correcting codes for enhancing reliability of modern digital communication systems, optical systems and storage devices. On the implementation side, however, the design of low-cost low-power and high-throughput LDPC-CC decoders remains challenging. This survey paper provides an overview of the state-of-the-art of different algorithmic optimizations proposed to ease and improve the LDPC-CC decoder implementations. To this end, a summary of the available decoding scheduling approaches is provided. Besides, a complexity analysis, performance comparison and an architectural analysis of LDPC-CC decoders based on different scheduling techniques is detailed.

IEEE Symposium on Computers and Communications (ISCC)•Jul 1, 2017•8 citations

Design and Analysis of LDPC Convolutional Codes

Arvind Sridharan

Low-density parity-check (LDPC) block codes invented by Gallager in 1962 achieve exceptional error performance on a wide variety of communication channels. LDPC convolutional codes are the convolutional counterparts of LDPC block codes. This dissertation describes techniques for the design of LDPC convolutional codes, and analyzes their distance properties and iterative decoding convergence thresholds. The construction of time invariant LDPC convolutional codes by unwrapping the Tanner graph of algebraically constructed quasi-cyclic LDPC codes is described. The convolutional codes outperform the quasi-cyclic codes from which they are derived. The design of parity-check matrices for time invariant LDPC convolutional codes by the polynomial extension of a base matrix is proposed. An upper bound on free distance, proving that time invariant LDPC codes are not asymptotically good, is obtained. The Tanner graph is used to describe a pipelined message passing based iterative decoder for LDPC convolutional codes that outputs decoding results continuously. The performance of LDPC block and convolutional codes are compared for fixed decoding parameters like computational complexity, processor complexity, and decoding delay. In each case, the LDPC convolutional code performance is at least as good as that of LDPC block codes. An analog circuit to implement pipelined decoding of LDPC convolutional codes is proposed. The distance properties of a permutation matrix based (time varying) ensemble of (J,K) regular LDPC convolutional codes is investigated. It is proved that these codes (for J > 2) have free distance increasing linearly with constraint length, i.e., they are asymptotically good. Further, the asymptotic free distance to constraint length ratio for the convolutional codes is several times larger than the minimum distance to block length ratio for corresponding LDPC block codes. Iterative decoding of terminated LDPC convolutional codes, based on the ensemble mentioned above, is analyzed, assuming transmission over a binary erasure channel. The structured irregularity of the codes leads to significantly better convergence thresholds compared to corresponding LDPC block codes. At the calculated thresholds, both the bit and block error probability can be made arbitrarily small. The results obtained suggest that the thresholds approach capacity with increasing J.

•Jan 1, 2005•30 citations
In this paper, decoding of LDPC convolutional codes with rational parity-check matrices (LDPC-CC-RPCM) is investigated. We show that Tanner graph of every LDPC-CC-RPCM can always be transformed into an equivalent one with enlarged girth and finite memory order suitable for practical pipeline decoder. Based on the transformed graph, a dynamic scheduling-aided decoding scheme with the enhancement of signal perturbation and error cancellation is presented to improve the convergence speed and bit-error-rate performance in both of the waterfall and error-floor regions. Simulation results also reveal that LDPC-CC-RPCM may outperform ordinary LDPC-CC with polynomial parity-check matrices in some cases under the same code rate and decoding complexity.
Previous studies on low-density parity-check convolutional codes (LDPC-CC) reveal that LDPC-CC with rational parity-check matrices (RPCM) suffer from the unaffordable decoding latency/complexity due to the infinite memory order and the poor bit-error-rate performance due to the existence of length-4 cycles in the Tanner graph. However, in this paper, we show that every LDPC-CC with RPCM can be associated with an equivalent Tanner graph which can avoid the infinite memory order and undesired short length cycles but still implements the same constraints specified by the RPCM. Together with the iterative decoding based on belief propagation with proper scheduling, simulation results indicate that LDPC-CC with RPCM can also provide satisfactory decoding performance.
The informed dynamic scheduling (IDS) strategy decoding algorithms performed exceptionally well for low-density parity-check codes in terms of the error-rate performance. However, the IDS decoding algorithm is greedy because of the unfair computation resources allocation among different variables nodes, which leads to poor convergence performance. In order to reduce the greediness of the IDS algorithm, the tabu search (TS) algorithm is introduced to the dynamic scheduling-based decoding in this paper. In the TS-based dynamic scheduling (TSDS) algorithm, the variable nodes in the Tanner graph are temporarily stored in a tabu list. In the decoding process with the TSDS algorithm, variable nodes stored in the tabu list will not be selected and updated until they are shifted out of the tabu list. Besides, an improved updating order is provided for the TSDS algorithm, by which the computational complexity can be decreased without the loss of error correction performance. Simulation results show that the proposed algorithm outperforms other decoding algorithms of interest in terms of bit error rate and convergence performance over the additive white Gaussian noise channel.
The best known practical algorithm for the decoding of low-density parity-check (LDPC) codes is the iterative sum-product or belief propagation algorithm, operating on a Tanner graph (TG) of the code. Conventionally, in each iteration, all the symbol nodes and subsequently all the check nodes in the TG pass new messages to their neighbors (the so-called "flooding schedule"). We propose a new message-passing schedule, called "probabilistic schedule." Unlike flooding, the probabilistic schedule operates based on the structure of the TG, and probabilistically balances the frequency at which different symbol nodes update their outgoing messages in accordance with their girths. Our results show that, particularly for short block lengths, the new schedule offers a much better performance/complexity trade-off. For a particular example of a (1268,456) code, at no cost in complexity, the probabilistic schedule not only decreases both the bit and message error rates by an order of magnitude, but also reduces the number of undetected errors considerably. This work shows the importance of scheduling in the performance of iterative decoding algorithms and suggests that a schedule which matches the structure of the TG can substantially improve the performance/complexity trade-off in the decoding of short LDPC codes.
The best known practical algorithm for the decoding of low-density parity-check (LDPC) codes is the iterative sum-product or belief propagation algorithm, operating on a Tanner graph (TG) of the code. Conventionally, in each iteration, all the symbol nodes and subsequently all the check nodes in the TG pass new messages to their neighbors (the so-called "flooding schedule"). We propose a new message-passing schedule, called "probabilistic schedule". Unlike flooding, the probabilistic schedule operation is based on the structure of the TG, and probabilistically balances the frequency at which different symbol nodes update their outgoing messages in accordance with their girths. Our results show that, particularly for short block lengths, the new schedule offers a much better performance/complexity trade-off. For a particular example of a (1268, 456) code, at no cost in complexity, the probabilistic schedule not only decreases both the bit and message error rates by an order of magnitude, but also reduces the number of undetected errors considerably. This work shows the importance of scheduling in the performance of iterative decoding algorithms and suggests that a schedule which matches the structure of the TG can substantially improve the performance/complexity trade-off in the decoding of short LDPC codes.
Low-density parity-check convolutional codes (LDPC-CC) have interesting error correction features. They have a great potential to become a key error-correcting codes for enhancing reliability of modern digital communication systems, optical systems and storage devices. On the implementation side, however, the design of low-cost low-power and high-throughput LDPC-CC decoders remains challenging. This survey paper provides an overview of the state-of-the-art of different algorithmic optimizations proposed to ease and improve the LDPC-CC decoder implementations. To this end, a summary of the available decoding scheduling approaches is provided. Besides, a complexity analysis, performance comparison and an architectural analysis of LDPC-CC decoders based on different scheduling techniques is detailed.
Low-density parity-check (LDPC) block codes invented by Gallager in 1962 achieve exceptional error performance on a wide variety of communication channels. LDPC convolutional codes are the convolutional counterparts of LDPC block codes. This dissertation describes techniques for the design of LDPC convolutional codes, and analyzes their distance properties and iterative decoding convergence thresholds. The construction of time invariant LDPC convolutional codes by unwrapping the Tanner graph of algebraically constructed quasi-cyclic LDPC codes is described. The convolutional codes outperform the quasi-cyclic codes from which they are derived. The design of parity-check matrices for time invariant LDPC convolutional codes by the polynomial extension of a base matrix is proposed. An upper bound on free distance, proving that time invariant LDPC codes are not asymptotically good, is obtained. The Tanner graph is used to describe a pipelined message passing based iterative decoder for LDPC convolutional codes that outputs decoding results continuously. The performance of LDPC block and convolutional codes are compared for fixed decoding parameters like computational complexity, processor complexity, and decoding delay. In each case, the LDPC convolutional code performance is at least as good as that of LDPC block codes. An analog circuit to implement pipelined decoding of LDPC convolutional codes is proposed. The distance properties of a permutation matrix based (time varying) ensemble of (J,K) regular LDPC convolutional codes is investigated. It is proved that these codes (for J > 2) have free distance increasing linearly with constraint length, i.e., they are asymptotically good. Further, the asymptotic free distance to constraint length ratio for the convolutional codes is several times larger than the minimum distance to block length ratio for corresponding LDPC block codes. Iterative decoding of terminated LDPC convolutional codes, based on the ensemble mentioned above, is analyzed, assuming transmission over a binary erasure channel. The structured irregularity of the codes leads to significantly better convergence thresholds compared to corresponding LDPC block codes. At the calculated thresholds, both the bit and block error probability can be made arbitrarily small. The results obtained suggest that the thresholds approach capacity with increasing J.