Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Lasers and Electro-Optics

Nanometer-scale deposition of ytterbium atoms

R. Ohmukai, Kazuma Kurihara, Masayuki Hyodo, K. Nakayama, Masayoshi Watanabe, Hitoshi Gene Kondo

Published Jan 1, 2006• 0 citations
Publisher

Abstract

We report the first demonstration of atomic nanofabrication using ytterbium atoms and a near-resonant light. We discuss a lithographic technique based on numerical simulations using an extremely far-off resonant laser light as an optical mask.
DOI
10.1109/cleo.2006.4628496

Related papers

Atomic nanofabrication using an ytterbium atomic beam

R. Ohmukai, Shinji Urabe, Masayoshi Watanabe

Highly parallel and periodically narrow lines of ytterbium (Yb) atoms were successfully produced on a substrate using a near resonant laser light and direct-write atomic nanofabrication. Yb atoms are a promising material for nanofabrication using atom optics particularly due to their electric conductivity, the laser wavelength required for their manipulation, and the vapor pressure required for their fabrication. Collimated 174Yb atoms were channeled into the nodes of an optical standing wave with dipole force and then deposited onto a substrate. We clearly observed a grating pattern of Yb atoms fabricated on a substrate with a line separation of approximately 200 nm after examining the surface of the substrate with an atomic force microscope. This is the first demonstration of nanofabrication using the atom-optical approach with Yb atoms.

Science and Technology of Advanced Materials•Jan 1, 2004•5 citations

A Proposed Nanofabrication Technique Using Optical Masks for Metastable Atom Lithography

Mark A. Baker, A.J. Palmer, Robert T. Sang

We present an overview of our progress towards using optical fields as 'light masks' for metastable atomic beam lithography. Numerical simulations have been undertaken to model the interaction of a beam of metastable neon atoms with a standing wave of 640.2 nm laser light. The current experimental setup and the proposed scheme for focusing the atoms is detailed

Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD)•Jan 25, 2006•0 citations

Nanometer-scale optical traps using atomic state localization

Deniz D. Yavuz, Nicholas Proite, Jonathan Tyler Green

We suggest a scheme where a laser beam forms an optical trap with a spatial size that is much smaller than the wavelength of light. The key idea is to combine a far-off-resonant dipole trap with a scheme that localizes an atomic excitation.

Physical Review A•May 19, 2009•12 citations

Laser manipulation of atoms and nanofabrication

Erich Jurdik

Fundamental interaction processes between atoms and photons are exploited to control external degrees of freedom of the atoms. Laser light, when properly tuned near an atomic resonance, exerts such forces that the atoms are repelled from or attracted to the regions with low light intensities. We use these forces to manipulate atom beams on nanometer-scale. In the simplest approach to nanofabrication via atom optics, a laser standing wave serves as a 'mask' through which the atoms are deposited onto a substrate. In this thesis we first present the modeling results on the focusing properties of a standing wave laser field and on the surface diffusion and growth phenomena in laser-focused atomic deposition. The development of our experimental facility for laser-manipulated deposition with chromium atoms (based on the obtained modeling results) is reported on. Thereafter, we demonstrate laser manipulation of chromium atoms and fabrication of nanostructures with these atoms. The results obtained in Nijmegen and also those obtained in collaboration with J.J. McClelland's group from the National Institute of Standards and Technology (Gaithersburg, Maryland, USA) are analyzed with the aim of understanding the role of atom-optical and surface growth phenomena in the fabrication process of laser-focused nanostructures

•Jan 1, 2001•5 citations

Atomic nanofabrication: perspectives for serial and parallel deposition

Dieter Meschede

Recent advances in atomic nanofabrication with laser manipulated atomic beams are discussed with regard to the creation of arbitrary structures.

Journal of Physics Conference Series•Jan 1, 2005•13 citations

Laser-focused atomic deposition – nanofabrication via atom optics

Jabez J. McClelland, R. J. Celotta

Thin Solid Films•May 1, 2000•22 citations
Highly parallel and periodically narrow lines of ytterbium (Yb) atoms were successfully produced on a substrate using a near resonant laser light and direct-write atomic nanofabrication. Yb atoms are a promising material for nanofabrication using atom optics particularly due to their electric conductivity, the laser wavelength required for their manipulation, and the vapor pressure required for their fabrication. Collimated 174Yb atoms were channeled into the nodes of an optical standing wave with dipole force and then deposited onto a substrate. We clearly observed a grating pattern of Yb atoms fabricated on a substrate with a line separation of approximately 200 nm after examining the surface of the substrate with an atomic force microscope. This is the first demonstration of nanofabrication using the atom-optical approach with Yb atoms.
Fundamental interaction processes between atoms and photons are exploited to control external degrees of freedom of the atoms. Laser light, when properly tuned near an atomic resonance, exerts such forces that the atoms are repelled from or attracted to the regions with low light intensities. We use these forces to manipulate atom beams on nanometer-scale. In the simplest approach to nanofabrication via atom optics, a laser standing wave serves as a 'mask' through which the atoms are deposited onto a substrate. In this thesis we first present the modeling results on the focusing properties of a standing wave laser field and on the surface diffusion and growth phenomena in laser-focused atomic deposition. The development of our experimental facility for laser-manipulated deposition with chromium atoms (based on the obtained modeling results) is reported on. Thereafter, we demonstrate laser manipulation of chromium atoms and fabrication of nanostructures with these atoms. The results obtained in Nijmegen and also those obtained in collaboration with J.J. McClelland's group from the National Institute of Standards and Technology (Gaithersburg, Maryland, USA) are analyzed with the aim of understanding the role of atom-optical and surface growth phenomena in the fabrication process of laser-focused nanostructures