Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

A Single-Clock Asynchronous Input COSL Set-Reset Flip-Flop and SFQ to Voltage State Interface

Coenrad Johann Fourie, Willem Jakobus Perold

Published Jun 1, 2005• 4 citations
Publisher

Abstract

Although published research in COSL has stagnated, it remains a useful logic family for interfacing the much faster RSFQ family to hot-logic circuits. COSL has always been plagued by the absence of latches, and previous attempts at implementing such latches were clumsy. A new COSL Set-Reset flip-flop is discussed here, and results shown. This asynchronous input latch, which can also be configured as a T flip-flop, can function on a single-phase clock. It was also adapted to convert SFQ output pulses from RSFQ logic circuits to voltage state levels that can be viewed on standard laboratory oscilloscopes. Due to the asynchronous nature of the inputs, the RSFQ-COSL converter is also more reliable than earlier DRO-to-COSL elements.

DOI
10.1109/tasc.2005.849785

Related papers

Single flux, quantum B flip-flop and its possible applications

Stanislav V. Polonsky, Vasili K. Semenov, Alex F. Kirichenko

We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1994•76 citations

New SFQ/DC converter for RSFQ logic/memory family

Stanislav V. Polonsky

Single flux quantum (SFQ) pulses used by the elements of RSFQ logic/memory family should be transformed into the usual DC-voltage form before leaving an RSFQ chip. To provide a high output voltage level (about the gap voltage V g ) the author suggests an SFQ/DC converter using unshunted hysteresis Josephson junctions. The converter employs a DC flip-flop of a HUFFLE type. It does not require AC power supply and can easily be integrated with the RSFQ elements.

Superconductor Science and Technology•Sep 1, 1991•6 citations

New logic circuits based on SFQ signals

Futoshi Furuta, Y. Suzuki, E Oya +5 more

We propose new logic circuits based on Single Flux Quantum logic with Resettable Latch (SFQ-RL). This new logic enables us to initialize the whole circuit and realize an inverter easily. This initialization function is needed for general state machines, in addition, suppressing the failed operation caused by a trapped flux in storage loops. SFQ-RL logic consists of three primitives of gates, "Latch (L)-gate", "Copy(C)-gate" and "OR (O)-gate". L-gate is a kind of flip-flop gate. The difference from a conventional RSFQ latch, "RS-FF" is that L-gate can be reset without emitting an output pulse using "Initialize" pulse. Our numerical simulation shows that the bias margin of L-gate is /spl plusmn/8%. C-gate and O-gate correspond to "Splitter" and "Confluence Buffer" in RSFQ logic, respectively. Every logic function can be realized by only the three primitives. We confirmed the operations, "AND" and "OR" with reasonable margins and speeds by the numerical calculation. We have experimentally demonstrated the logic function such as OR based on SFQ-RL logic. We confirmed the normal operation of the gate with the bias margin of /spl plusmn/25.9%.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•8 citations

Design and experimentation of BSFQ logic devices

T. Hosoki, Hiroki Kodaka, M Kitagawa +1 more

Rapid single flux quantum (RSFQ) logic needs synchronous pulses for each gate, so the clock-wiring problem is more serious when designing larger scale circuits with this logic. So we have proposed a new SFQ logic which follows Boolean algebra perfectly by using set and reset pulses. With this logic, the level information of current input is transmitted with these pulses generated by level-to-pulse converters, and each gate calculates logic using its phase level made by these pulses. Therefore, our logic needs no clock in each gate. We called this logic `Boolean SFQ (BSFQ) logic'. In this paper, we report design and experimentation for an AND gate with inverting input based on BSFQ logic. The experimental results for OR and XOR gates are also reported.

Superconductor Science and Technology•Nov 1, 1999•3 citations

New multi-flux-quantum logic family

V.K. Kaphmenko, E. Wikborg

We report on a voltage-state logic family based on shunted Josephson junctions and on the Rapid Single Flux Quantum (RSFQ) concept. Storing information in a voltage-state form makes this Multi-Flux-Quantum Logic (MFQL) easier to match to complementary metal-oxide semiconductor (CMOS) circuits. The switching of MFQL element between the voltage and zero-voltage states takes a minimum of two SFQ pulses, and the switching time of this logic is comparable to that of RSFQ logic. The key logic element is an inverter in the form of an asymmetric interferometer, and the underlying idea is to use a separate superconducting wire to supply a standard dc output voltage for the elements. The asymmetric interferometer, directly coupled to the other elements, is actually a Josephson junction based three-terminal device or transistor. Elements such as NOT, OR, NOR, XOR, XNOR, a toggle flip-flop, and an RS trigger have been simulated, and show margins better than /spl plusmn/24%. The performance of this logic with current circuit fabrication technologies is also discussed.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•1 citation

Self-Resetting Interface Between Rapid Single-Flux-Quantum and Adiabatic Quantum-Flux-Parametron Circuits

Mikiya Naruse, Nobuyuki Yoshikawa, Naoki Takeuchi

Various superconductor logic families have been proposed to build energy-efficient digital systems. Each logic family has its respective advantages and disadvantages, so in some systems, it is crucial to combine different superconductor logic families. We previously developed adiabatic quantum-flux-parametron (AQFP)/rapid single-flux-quantum (RSFQ) hybrid systems, such as a readout circuit for superconducting photon detectors and a flux-bias circuit for superconducting quantum bits. To facilitate the design of AQFP/RSFQ hybrid systems, here we propose a self-resetting RSFQ-to-AQFP (SR-R2A) interface as a compact signal converter from RSFQ logic into AQFP logic. The SR-R2A interface comprises an RSFQ latch and an AQFP comparator, where the AQFP comparator detects the flux state of the RSFQ latch. A previously proposed RSFQ-to-AQFP (R2A) interface requires single-flux-quantum clock signals to reset the flux state of the RSFQ part in the R2A interface, whereas the SR-R2A interface does not require such signals because the excitation current for the AQFP part also resets the flux state of the RSFQ latch. This feature allows the SR-R2A to be incorporated into AQFP/RSFQ hybrid systems without hardware overhead. We demonstrate an SR-R2A interface chip, fabricated with the AIST 10-kA/cm2Nb high-speed standard process, at 4.2 K in liquid helium. The experimental results indicate reasonably wide operating margins for the excitation currents and bias voltage for the SR-R2A interface.

IEEE Transactions on Applied Superconductivity•Jul 26, 2023•0 citations
Although published research in COSL has stagnated, it remains a useful logic family for interfacing the much faster RSFQ family to hot-logic circuits. COSL has always been plagued by the absence of latches, and previous attempts at implementing such latches were clumsy. A new COSL Set-Reset flip-flop is discussed here, and results shown. This asynchronous input latch, which can also be configured as a T flip-flop, can function on a single-phase clock. It was also adapted to convert SFQ output pulses from RSFQ logic circuits to voltage state levels that can be viewed on standard laboratory oscilloscopes. Due to the asynchronous nature of the inputs, the RSFQ-COSL converter is also more reliable than earlier DRO-to-COSL elements.
We are introducing a new subfamily of rapid single-flux-quantum (RSFQ) digital cells, based on a single B flip-flop template. The template can be considered as an SFQ flip-flop with up to 4 inputs and 6 outputs. Each input SFQ pulse can change the flip-flop's internal state. Each output presents (in the form of SFQ pulses a specific logic function of the initial state of the cell and input signals. Simple connection of various inputs and/or outputs, combined with shortening or opening of certain branches of the template allows one to implement a variety of RSFQ cells with wide margins. Of these various RSFQ cells, we have designed and successfully tested the T1 cell (asynchronous toggle flip-flop with synchronous destructive readout), single-bit full adder, and single-bit stage of an up-down counter. Experimentally measured margins for dc power supply voltage for these circuits were /spl plusmn/24%, /spl plusmn/24%, and /spl plusmn/17%, respectively.>
We propose new logic circuits based on Single Flux Quantum logic with Resettable Latch (SFQ-RL). This new logic enables us to initialize the whole circuit and realize an inverter easily. This initialization function is needed for general state machines, in addition, suppressing the failed operation caused by a trapped flux in storage loops. SFQ-RL logic consists of three primitives of gates, "Latch (L)-gate", "Copy(C)-gate" and "OR (O)-gate". L-gate is a kind of flip-flop gate. The difference from a conventional RSFQ latch, "RS-FF" is that L-gate can be reset without emitting an output pulse using "Initialize" pulse. Our numerical simulation shows that the bias margin of L-gate is /spl plusmn/8%. C-gate and O-gate correspond to "Splitter" and "Confluence Buffer" in RSFQ logic, respectively. Every logic function can be realized by only the three primitives. We confirmed the operations, "AND" and "OR" with reasonable margins and speeds by the numerical calculation. We have experimentally demonstrated the logic function such as OR based on SFQ-RL logic. We confirmed the normal operation of the gate with the bias margin of /spl plusmn/25.9%.
Rapid single flux quantum (RSFQ) logic needs synchronous pulses for each gate, so the clock-wiring problem is more serious when designing larger scale circuits with this logic. So we have proposed a new SFQ logic which follows Boolean algebra perfectly by using set and reset pulses. With this logic, the level information of current input is transmitted with these pulses generated by level-to-pulse converters, and each gate calculates logic using its phase level made by these pulses. Therefore, our logic needs no clock in each gate. We called this logic `Boolean SFQ (BSFQ) logic'. In this paper, we report design and experimentation for an AND gate with inverting input based on BSFQ logic. The experimental results for OR and XOR gates are also reported.
We report on a voltage-state logic family based on shunted Josephson junctions and on the Rapid Single Flux Quantum (RSFQ) concept. Storing information in a voltage-state form makes this Multi-Flux-Quantum Logic (MFQL) easier to match to complementary metal-oxide semiconductor (CMOS) circuits. The switching of MFQL element between the voltage and zero-voltage states takes a minimum of two SFQ pulses, and the switching time of this logic is comparable to that of RSFQ logic. The key logic element is an inverter in the form of an asymmetric interferometer, and the underlying idea is to use a separate superconducting wire to supply a standard dc output voltage for the elements. The asymmetric interferometer, directly coupled to the other elements, is actually a Josephson junction based three-terminal device or transistor. Elements such as NOT, OR, NOR, XOR, XNOR, a toggle flip-flop, and an RS trigger have been simulated, and show margins better than /spl plusmn/24%. The performance of this logic with current circuit fabrication technologies is also discussed.
Various superconductor logic families have been proposed to build energy-efficient digital systems. Each logic family has its respective advantages and disadvantages, so in some systems, it is crucial to combine different superconductor logic families. We previously developed adiabatic quantum-flux-parametron (AQFP)/rapid single-flux-quantum (RSFQ) hybrid systems, such as a readout circuit for superconducting photon detectors and a flux-bias circuit for superconducting quantum bits. To facilitate the design of AQFP/RSFQ hybrid systems, here we propose a self-resetting RSFQ-to-AQFP (SR-R2A) interface as a compact signal converter from RSFQ logic into AQFP logic. The SR-R2A interface comprises an RSFQ latch and an AQFP comparator, where the AQFP comparator detects the flux state of the RSFQ latch. A previously proposed RSFQ-to-AQFP (R2A) interface requires single-flux-quantum clock signals to reset the flux state of the RSFQ part in the R2A interface, whereas the SR-R2A interface does not require such signals because the excitation current for the AQFP part also resets the flux state of the RSFQ latch. This feature allows the SR-R2A to be incorporated into AQFP/RSFQ hybrid systems without hardware overhead. We demonstrate an SR-R2A interface chip, fabricated with the AIST 10-kA/cm2Nb high-speed standard process, at 4.2 K in liquid helium. The experimental results indicate reasonably wide operating margins for the excitation currents and bias voltage for the SR-R2A interface.