Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Multiple-Valued Logic (ISMVL)

Quantum Phase Estimation Using Multivalued Logic

Vamsi Parasa, Marek A. Perkowski

Published May 1, 2011• 13 citations
Publisher

Abstract

Quantum phase estimation (QPE) is one of the most important quantum algorithms which is used as a subroutine for other important quantum algorithms like Shor's factoring algorithm, simulation of quantum systems, quantum counting and QFT on arbitrary Zp. In this paper we develop the theoretical framework for the multivalued quantum logic version of the QPE algorithm using d valued qudits and show a quantum circuit to implement QPE with a complexity of O(nlogn) single qudit operations. The multivalued QPE algorithm, when compared to the binary quantum logic version, turns out to be more robust and leads to a significant decrease in the number of qudits required along with drastic improvement in the precision and success probability. We derive the requirements to amplify the probability of success to a value very close to 1 (for a given precision), thereby generalizing the previously obtained result in the binary case. Also, we note that the failure probability of QPE algorithm decreases exponentially as d increases.

DOI
10.1109/ismvl.2011.47

Related papers

Adiabatic Quantum Phase Estimation

Alexander Schmidhuber, Seth Lloyd

Quantum phase estimation (QPE) is a central algorithmic primitive that estimates eigenvalues of a Hamiltonian up to precision $ε$ in Heisenberg-limited time $T=Θ(1/ε)$. Standard gate-based implementations of QPE require deep controlled time-evolution circuits and are not native to analog hardware. Here, we present a simple adiabatic protocol for QPE that achieves (up to logarithmic factors) the optimal Heisenberg-limited scaling $T = O\left( \frac{1}ε \log\left(δ^{-1}\right)\right)$ in both the precision $ε$ and failure probability $δ$. By encoding eigenvalues in populations of computational basis states rather than complex phases, our approach is naturally robust against certain dephasing errors. The adiabatic protocol only requires the ability to couple a single ancilla qubit to the system Hamiltonian as well as pairwise couplings within the ancilla register.

quant-pharXiv:2605.22770•May 22, 2026•0 citations

Quantum Phase Estimation and Arbitrary Accuracy Iterative Phase Estimation Using Multivalued Logic

Vamsi Parasa, Marek A. Perkowski

This papers presents the generalization of the quantum phase estimation (QPE) algorithm to multivalued logic. QPE is a very important subroutine used in many quantum algorithms of practical importance. The QPE using qudits has certain advantages when compared to the version using qubits. The QPE using qudits is more accurate and requires lesser number of qudits (as the value of the radix d increases) to estimate the phase up to a given accuracy with a given success probability. Since the existing quantum computer implementations use only few qubits, it is important to have alternative versions of the QPE which use as few qubits as possible. In this regard, the iterative quantum phase estimation algorithm (IQPE) which uses only single qubit to store the phase information has been developed. The number of iterations involved in the IQPE is directly proportional to the required accuracy in the estimated phase. In this regard, IQPE using qudits requires (logarithmically) lesser number of iterations (and hence is faster) compared to the one using qubits. In this paper, we also develop the multivalued logic version of the IQPE and describe its implementation.

•Jan 1, 2015•0 citations

Quantum phase estimation and quantum counting with qudits

Hristo Tonchev, Nikolay V. Vitanov

Implementations of the quantum phase estimation and quantum counting algorithms with qudits are proposed. The construction of the basic building blocks of the algorithms is described in detail and the fidelity of the quantum counting algorithm with qubits and qudits is simulated numerically. Along with the exponential increase of the size of the target register, the simulations with qudits demonstrate significantly higher probability of finding the number of solutions than qubits and more consistent performance for a different number of solutions.

Physical Review A•Oct 7, 2016•18 citations

On the robustness of Quantum Phase Estimation to compute ground properties of many-electron systems

Wassil Sennane, Jérémie Messud

We propose an analysis of the Quantum Phase Estimation (QPE) algorithm applied to many-electron systems by investigating its free parameters such as the time step, number of phase qubits, initial state preparation, number of measurement shots, and other parameters related to the unitary operators implementation. A deep understanding of these parameters and their impact on QPE probability of success and precision of the results is important to pave the way towards more automation of QPE applied to predictive computational chemistry and material science. We here explicit a constructive method to set the QPE free parameters for ground energy estimation and ground state projection, gathering disseminated results from previous works, refining these results and developing new conditions for achieving target performance. We detail the impact of the QPE `blurring function', related to discretization effects, and propose a method to overcome corresponding pathologies. We finally demonstrate that, using the conditions gathered here, the complexity of the Trotterized version of QPE tends to depend mostly on physical system properties and weakly on the number of phase qubits. Various numerical results illustrate the impact of QPE free parameters on success probability and discretization effects. The impact of Trotterization and other features on the precision of the results are illustrated by first numerical simulations on the H2 molecule, that allows us to derive useful insights.

quant-pharXiv:2601.05788•Jan 12, 2026•3 citations

Deterministic Quantum Phase Estimation with Linear Circuit Complexity in a Photonic System

M. Midhuna, Ajay Jayachandran, Kanad Sengupta +2 more

Quantum algorithms solve certain computational problems faster than the best known classical algorithms. Many algorithms, including Shor's for factoring, Grover's for unstructured search, and the HHL for solving linear systems, rely on quantum phase estimation (QPE) as a fundamental subroutine. The QPE protocol proceeds through the initialization of a control register in a uniform superposition, controlled unitary evolution encoding the eigenphase, and a final inverse quantum Fourier transform followed by measurement to extract the phase. Here, we address a special class of unitary operators that frequently appear in quantum Fourier transform-based protocols, cyclic group representations, and periodically evolving quantum systems. We introduce a QPE algorithm that successfully reduces the circuit complexity from $\mathcal{O}(n^2)$ to $\mathcal{O}(n)$ for a special class of unitary operators and implement it on a four-qubit photonic system. The four-qubit system is realised using a photon pair, with two qubits encoded in its polarization degree of freedom and the remaining two in its path modes. In contrast to previous photonic implementations of QPE based on dual-rail encoding and KLM protocol, where controlled operations are inherently probabilistic and thus reduce the overall success probability of phase estimation, our scheme is fully deterministic. Moreover, it is scalable to higher-dimensional unitaries, provided the underlying structure of the unitaries is preserved.

quant-pharXiv:2607.13404•Jul 16, 2026•0 citations

THEORETICAL FRAMEWORK AND ALGORITHMIC IMPLEMENTATION OF THE QUANTUM FOURIER TRANSFORM AND PHASE ESTIMATION

Medak Srinivas

The Quantum Fourier Transform (QFT)andQuantumPhaseEstimation (QPE)are twofundamental algorithmic frameworks in quantum computation, and they provide the mathematical basis of many exponential-speedup quan tum algorithms, such as Shor’s factoring algorithm and quantum simulation techniques. In this work we present a detailed theoretical and computational study of the Quantum Fourier Transform and its integration in the Quan tum Phase Estimation. The discussion begins with the linear algebraic structure of the Hilbert spaces, the unitary transformations, and the complex vector representations that enable quantum interference and superposition. The QFT is studied as the unitary transform of computational basis states in the amplitudes in the frequency domain by phase rotations and tensor-product decompositions. The efficient circuit implementation in terms of Hadamard and controlled phase gates of this transform is discussed. The advantage of the transform in terms of polynomial time complexity over the classical discrete Fourier transform in some quantum scenarios is discussed.The QFT is implemented and the Quantum Phase Estimation algorithm is proposed to obtain the eigenphase information of the unitary operators. In the report the mathematical representation of QPE is derived by using the controlled unitary evolution, the inverse Fourier transforms and the measurement theory in finite dimensional Hilbert spaces. We discuss the probabilistic interpretation of phase extraction in detail and the convergence properties of the bi nary phase approximation. We also discuss the relation of QPE to eigenvalue problems in quantum mechanics and its applications to Hamiltonian simulation, quantum chemistry, cryptography, and hidden subgroup prob lems.Implementation aspects of these algorithms are studied using quantum circuit representations and oracle based computation models. We also discuss error sensitivity, qubit precision requirements, decoherence limita tions and practical constraints of Noisy Intermediate-Scale Quantum (NISQ) hardware. The work synthesizes the mathematical foundations, computational complexity analysis and physical realizations of the QFT and the QPE, demonstrating how the Fourier-based quantum transformations provide the essential mechanism underlying modern quantum algorithmic speedups and scalable quantum information processing.

Iterative International Publishers eBooks•May 1, 2026•0 citations
Quantum phase estimation (QPE) is one of the most important quantum algorithms which is used as a subroutine for other important quantum algorithms like Shor's factoring algorithm, simulation of quantum systems, quantum counting and QFT on arbitrary Zp. In this paper we develop the theoretical framework for the multivalued quantum logic version of the QPE algorithm using d valued qudits and show a quantum circuit to implement QPE with a complexity of O(nlogn) single qudit operations. The multivalued QPE algorithm, when compared to the binary quantum logic version, turns out to be more robust and leads to a significant decrease in the number of qudits required along with drastic improvement in the precision and success probability. We derive the requirements to amplify the probability of success to a value very close to 1 (for a given precision), thereby generalizing the previously obtained result in the binary case. Also, we note that the failure probability of QPE algorithm decreases exponentially as d increases.
Quantum phase estimation (QPE) is a central algorithmic primitive that estimates eigenvalues of a Hamiltonian up to precision εεε in Heisenberg-limited time T=Θ(1/ε)T=Θ(1/ε)T=Θ(1/ε). Standard gate-based implementations of QPE require deep controlled time-evolution circuits and are not native to analog hardware. Here, we present a simple adiabatic protocol for QPE that achieves (up to logarithmic factors) the optimal Heisenberg-limited scaling T=O(1εlog⁡(δ−1))T = O\left( \frac{1}ε \log\left(δ^{-1}\right)\right)T=O(ε1​log(δ−1)) in both the precision εεε and failure probability δδδ. By encoding eigenvalues in populations of computational basis states rather than complex phases, our approach is naturally robust against certain dephasing errors. The adiabatic protocol only requires the ability to couple a single ancilla qubit to the system Hamiltonian as well as pairwise couplings within the ancilla register.
This papers presents the generalization of the quantum phase estimation (QPE) algorithm to multivalued logic. QPE is a very important subroutine used in many quantum algorithms of practical importance. The QPE using qudits has certain advantages when compared to the version using qubits. The QPE using qudits is more accurate and requires lesser number of qudits (as the value of the radix d increases) to estimate the phase up to a given accuracy with a given success probability. Since the existing quantum computer implementations use only few qubits, it is important to have alternative versions of the QPE which use as few qubits as possible. In this regard, the iterative quantum phase estimation algorithm (IQPE) which uses only single qubit to store the phase information has been developed. The number of iterations involved in the IQPE is directly proportional to the required accuracy in the estimated phase. In this regard, IQPE using qudits requires (logarithmically) lesser number of iterations (and hence is faster) compared to the one using qubits. In this paper, we also develop the multivalued logic version of the IQPE and describe its implementation.
Implementations of the quantum phase estimation and quantum counting algorithms with qudits are proposed. The construction of the basic building blocks of the algorithms is described in detail and the fidelity of the quantum counting algorithm with qubits and qudits is simulated numerically. Along with the exponential increase of the size of the target register, the simulations with qudits demonstrate significantly higher probability of finding the number of solutions than qubits and more consistent performance for a different number of solutions.
We propose an analysis of the Quantum Phase Estimation (QPE) algorithm applied to many-electron systems by investigating its free parameters such as the time step, number of phase qubits, initial state preparation, number of measurement shots, and other parameters related to the unitary operators implementation. A deep understanding of these parameters and their impact on QPE probability of success and precision of the results is important to pave the way towards more automation of QPE applied to predictive computational chemistry and material science. We here explicit a constructive method to set the QPE free parameters for ground energy estimation and ground state projection, gathering disseminated results from previous works, refining these results and developing new conditions for achieving target performance. We detail the impact of the QPE `blurring function', related to discretization effects, and propose a method to overcome corresponding pathologies. We finally demonstrate that, using the conditions gathered here, the complexity of the Trotterized version of QPE tends to depend mostly on physical system properties and weakly on the number of phase qubits. Various numerical results illustrate the impact of QPE free parameters on success probability and discretization effects. The impact of Trotterization and other features on the precision of the results are illustrated by first numerical simulations on the H2 molecule, that allows us to derive useful insights.
Quantum algorithms solve certain computational problems faster than the best known classical algorithms. Many algorithms, including Shor's for factoring, Grover's for unstructured search, and the HHL for solving linear systems, rely on quantum phase estimation (QPE) as a fundamental subroutine. The QPE protocol proceeds through the initialization of a control register in a uniform superposition, controlled unitary evolution encoding the eigenphase, and a final inverse quantum Fourier transform followed by measurement to extract the phase. Here, we address a special class of unitary operators that frequently appear in quantum Fourier transform-based protocols, cyclic group representations, and periodically evolving quantum systems. We introduce a QPE algorithm that successfully reduces the circuit complexity from O(n2)\mathcal{O}(n^2)O(n2) to O(n)\mathcal{O}(n)O(n) for a special class of unitary operators and implement it on a four-qubit photonic system. The four-qubit system is realised using a photon pair, with two qubits encoded in its polarization degree of freedom and the remaining two in its path modes. In contrast to previous photonic implementations of QPE based on dual-rail encoding and KLM protocol, where controlled operations are inherently probabilistic and thus reduce the overall success probability of phase estimation, our scheme is fully deterministic. Moreover, it is scalable to higher-dimensional unitaries, provided the underlying structure of the unitaries is preserved.
The Quantum Fourier Transform (QFT)andQuantumPhaseEstimation (QPE)are twofundamental algorithmic frameworks in quantum computation, and they provide the mathematical basis of many exponential-speedup quan tum algorithms, such as Shor’s factoring algorithm and quantum simulation techniques. In this work we present a detailed theoretical and computational study of the Quantum Fourier Transform and its integration in the Quan tum Phase Estimation. The discussion begins with the linear algebraic structure of the Hilbert spaces, the unitary transformations, and the complex vector representations that enable quantum interference and superposition. The QFT is studied as the unitary transform of computational basis states in the amplitudes in the frequency domain by phase rotations and tensor-product decompositions. The efficient circuit implementation in terms of Hadamard and controlled phase gates of this transform is discussed. The advantage of the transform in terms of polynomial time complexity over the classical discrete Fourier transform in some quantum scenarios is discussed.The QFT is implemented and the Quantum Phase Estimation algorithm is proposed to obtain the eigenphase information of the unitary operators. In the report the mathematical representation of QPE is derived by using the controlled unitary evolution, the inverse Fourier transforms and the measurement theory in finite dimensional Hilbert spaces. We discuss the probabilistic interpretation of phase extraction in detail and the convergence properties of the bi nary phase approximation. We also discuss the relation of QPE to eigenvalue problems in quantum mechanics and its applications to Hamiltonian simulation, quantum chemistry, cryptography, and hidden subgroup prob lems.Implementation aspects of these algorithms are studied using quantum circuit representations and oracle based computation models. We also discuss error sensitivity, qubit precision requirements, decoherence limita tions and practical constraints of Noisy Intermediate-Scale Quantum (NISQ) hardware. The work synthesizes the mathematical foundations, computational complexity analysis and physical realizations of the QFT and the QPE, demonstrating how the Fourier-based quantum transformations provide the essential mechanism underlying modern quantum algorithmic speedups and scalable quantum information processing.