Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Nonlinear resonant absorption effects on the design of resonance fluorescence lidars and laser guide stars

Byron M. Welsh, Chester S. Gardner

Published Oct 1, 1989• 34 citations
Publisher

Abstract

Saturation effects may significantly reduce the backscattered signal expected for resonance fluorescence lidar systems. Saturation arises when the laser energy density within the layer is large enough to significantly alter the population densities of the atomic states within the layer. These altered state populations lead to nonlinear absorption of the laser energy resulting in reduced rate of fluorescence and increased rate of stimulated emission. The level of saturation is determined by the laser pulse length, pulse energy, beam-width, and linewidth. Analysis reveals that the saturation effects can be characterized by two parameters: the saturation time tau(s) and the rms laser linewidth Deltaomega(rms).The saturation time is the characteristic time of stimulated emission and is an indication of the level of saturation. The saturation time depends on pulse energy, pulse length, and beamwidth. The laser linewidth is important since it determines the effective absorption cross section of the atoms and also the percentage of atoms illuminated for an inhomogeneously broadened absorption line. The impact of saturation on lidar design is also examined. Design examples, including lidar systems for atmospheric research and laser guide stars for adaptive imaging applications in astronomy are studied in detail.

DOI
10.1364/ao.28.004141

Related papers

Transit effects in saturated absorption resonances

E. V. Baklanov, B Ya Dubetskiĭ

An important problem in saturated absorption spectroscopy is discussed: the width of a nonlinear absorption resonance in a low-pressure gas in a standing wave field. It is shown that the results reported by A.N. Titov et al. are incorrect. These authors stated that at weak saturations the resonance width is of the order of the reciprocal transit time of an atom traveling at the thermal velocity across a light beam. The specific source of the error is indicated, which is an incorrect mathematical treatment of the correct initial equations. It is also shown that the saturated absorption line profile in the transit limit is almost independent of the laser field configuration.

Soviet Journal of Quantum Electronics•Jul 31, 1988•1 citation

Laser Stabilization via Saturation Absorption Spectroscopy

Mehmet Hüseyin Sevim, Kamil Çınar, Murat Salim Karabinaoğlu +3 more

Precise laser stabilization is a fundamental aspect of modern metrology, directly influencing the accuracy of fundamental measurements in fields such as high-precision metrology, atomic sensor applications, and quantum technologies. Saturation absorption spectroscopy (SAS) is one of the most effective techniques for achieving high spectral stability, as it enables laser frequencies to be locked to atomic resonances. This technique exploits the nonlinear interaction between a weaker probe beam and a stronger pump beam within a rubidium (Rb) atomic vapor cell. By eliminating Doppler broadening, SAS allows well-defined hyperfine transitions to be resolved, providing a reliable optical frequency reference. This study aims to optimize laser frequency stabilization using the SAS technique by investigating the effects of laser light polarization, atomic vapor cell temperature, and pump-probe power adjustments. Polarization-dependent selection rules influence transition probabilities, thereby affecting spectral contrast and frequency stability. Additionally, atomic density variations, which depend on the vapor cell temperature, influence signal strength and linewidth, necessitating precise temperature control for optimal performance. Furthermore, the pump power must be sufficient to induce saturation without excessive power broadening, while the probe power must remain low enough to prevent spectral line distortion. By optimizing polarization, temperature, and power parameters, the stabilization of the Rb atomic laser can be enhanced, leading to improved reproducibility and consistency in high-precision measurements. SAS-based laser stabilization is particularly crucial for atomic sensor applications and quantum technologies, where highly stable, narrow-linewidth lasers are essential for precision measurements. Applications such as atomic magnetometers, gyroscopes, and inertial navigation systems depend on precisely stabilized lasers for optimal performance. By enhancing the reliability of laser frequency stabilization, this work contributes to the advancement of next-generation atomic sensors with improved sensitivity and stability.

•Jan 1, 2025•0 citations

Saturation Behavior of a Doppler-Broadened Transition Involving Levels with Closely Spaced Structure

H. Schlossberg, Ali Javan

The nonlinear absorption or gain characteristics of an optical-frequency, Doppler-broadened atomic resonance involving levels with closely spaced structure are analyzed. The level structures are assumed to be resolved with respect to their natural widths, but not necessarily with respect to the Doppler width at the optical transition. The radiation field consists of two closely spaced monochromatic frequencies lying within the Doppler width of the resonance. This type of radiation field may be obtained, for example, from a laser operating in two of its Fabry-Perot resonator modes. It is shown that, because of saturation of level populations and double-quantum Raman transitions between levels, appreciable nonlinear coupling takes place between the two fields. This coupling shows a resonance behavior when the frequency separation of the two applied fields becomes equal to the frequency splitting between two of the components which form either level structure. The width of this resonance is determined entirely by the natural widths of these two level components and not by the Doppler width of the optical transition or the natural width of other level components. When such a resonance occurs, the over-all gain or attenuation characteristics of the atomic resonance change drastically. In practice the frequency spacing of the fields may be kept constant while the level structures are tuned, e.g., magnetically. The effects are analyzed for cases of running-wave and standing-wave radiation fields. The use of this effect in precise determination of level structures as well as mode or transition coupling of a gas laser is discussed. Portions of the analysis are applicable to resonances with more general forms of inhomogeneous broadening.

Physical Review•Oct 7, 1966•184 citations

Saturation effects on polarized-light-pulse propagation and the resultant laser-induced fluorescence

Y. B. Band

We consider the nonlinear propagation of an intense short pulse of polarized light through a molecular medium with ground- and excited-state absorption, excited-state emission, and fluorescence from the excited state to the ground state and possibly to a lower-lying excited state. We incorporate the effects of saturation, field-induced alignment, and rotational diffusion of the molecules in the medium. Our approach uses a slowly varying envelope approximation for the light propagation and rate equations for the effective parallel and perpendicular (and higher-multipole) population components of the molecular states. The time dependence of the anisotropy of the fluorescence occurring after preparation of the medium by the intense short pulse is determined. We can treat propagation through an optically nonthin medium wherein the intensity of the pulse decreases while propagating through the medium. An example of a 100-ps pulse propagating through a sample of Rhodamine-6G is presented. We compare our method with others used to describe intense-short-pulse propagation in molecular media.

Physical Review A•Jul 1, 1986•26 citations

Laser-Induced Line-Narrowing Effects in Coupled Doppler-Broadened Transitions

Michael S. Feld, Ali Javan

The line shape of a Doppler-broadened transition is dramatically altered by the presence of a laser field resonating with a second Doppler-broadened transition sharing a common level: Two narrow resonances of different widths appear superimposed upon the broad background signal at frequencies symmetrically located about the corresponding line center. The effect has already found application in a number of seemingly different though intimately related studies, including high-resolution hfs and isotope-shift determinations. The theory of the effect is developed with reference to these applications. The treatment is formulated in terms of transition rates induced by two classical fields resonantly interacting with a pair of coupled Doppler-broadened transitions of arbitrary frequencies. The perturbation approach adopted is valid for one field fully saturating its transition; the resulting line-shape expression exhibits important power-broadening effects. This approach is equivalent to the familiar density-matrix formulation, which is also presented. Various features of the resulting expression are discussed in detail as they apply to two precision spectroscopic applications, mode crossing and spontaneous emission line narrowing. The connection with previous work is also discussed.

Physical Review•Jan 10, 1969•294 citations

Absorption of resonance radiation and fluorescence of a layer of an atomic gas with thickness of the order of a wavelength

G. Nikogosyan, David G. Sarkisyan, Yu. P. Malakyan

The features of resonance fluorescence and absorption of resonance laser radiation in atomic vapors in a superthin cell with thickness L of the order of a wavelength lambda are investigated theoretically. Taking into account the Fabry-Perot interference effect, it is found that the dependence of the fluorescence and absorption spectra on the ratio L/lambda is substantially different. Coherent spectral narrowing - the Dicke effect - when L=(2n+1)lambda/2 and broadening of the spectral line when L = n lambda (n is a whole number) are observed in the absorption spectra. This effect is absent in the spector of resonance fluorescence in extended media. It is also shown that the processes of saturation and optical pumping significantly alter the spectral line shape as the laser intensity increases; in particular, additional sub-Doppler dips appear at the frequency of the atomic transitions. Calculated curves are given for the D2 lines of ^85Rb atoms. © 2004 Optical Society of America

Journal of Optical Technology•Sep 1, 2004•21 citations
Saturation effects may significantly reduce the backscattered signal expected for resonance fluorescence lidar systems. Saturation arises when the laser energy density within the layer is large enough to significantly alter the population densities of the atomic states within the layer. These altered state populations lead to nonlinear absorption of the laser energy resulting in reduced rate of fluorescence and increased rate of stimulated emission. The level of saturation is determined by the laser pulse length, pulse energy, beam-width, and linewidth. Analysis reveals that the saturation effects can be characterized by two parameters: the saturation time tau(s) and the rms laser linewidth Deltaomega(rms).The saturation time is the characteristic time of stimulated emission and is an indication of the level of saturation. The saturation time depends on pulse energy, pulse length, and beamwidth. The laser linewidth is important since it determines the effective absorption cross section of the atoms and also the percentage of atoms illuminated for an inhomogeneously broadened absorption line. The impact of saturation on lidar design is also examined. Design examples, including lidar systems for atmospheric research and laser guide stars for adaptive imaging applications in astronomy are studied in detail.
An important problem in saturated absorption spectroscopy is discussed: the width of a nonlinear absorption resonance in a low-pressure gas in a standing wave field. It is shown that the results reported by A.N. Titov et al. are incorrect. These authors stated that at weak saturations the resonance width is of the order of the reciprocal transit time of an atom traveling at the thermal velocity across a light beam. The specific source of the error is indicated, which is an incorrect mathematical treatment of the correct initial equations. It is also shown that the saturated absorption line profile in the transit limit is almost independent of the laser field configuration.
Precise laser stabilization is a fundamental aspect of modern metrology, directly influencing the accuracy of fundamental measurements in fields such as high-precision metrology, atomic sensor applications, and quantum technologies. Saturation absorption spectroscopy (SAS) is one of the most effective techniques for achieving high spectral stability, as it enables laser frequencies to be locked to atomic resonances. This technique exploits the nonlinear interaction between a weaker probe beam and a stronger pump beam within a rubidium (Rb) atomic vapor cell. By eliminating Doppler broadening, SAS allows well-defined hyperfine transitions to be resolved, providing a reliable optical frequency reference. This study aims to optimize laser frequency stabilization using the SAS technique by investigating the effects of laser light polarization, atomic vapor cell temperature, and pump-probe power adjustments. Polarization-dependent selection rules influence transition probabilities, thereby affecting spectral contrast and frequency stability. Additionally, atomic density variations, which depend on the vapor cell temperature, influence signal strength and linewidth, necessitating precise temperature control for optimal performance. Furthermore, the pump power must be sufficient to induce saturation without excessive power broadening, while the probe power must remain low enough to prevent spectral line distortion. By optimizing polarization, temperature, and power parameters, the stabilization of the Rb atomic laser can be enhanced, leading to improved reproducibility and consistency in high-precision measurements. SAS-based laser stabilization is particularly crucial for atomic sensor applications and quantum technologies, where highly stable, narrow-linewidth lasers are essential for precision measurements. Applications such as atomic magnetometers, gyroscopes, and inertial navigation systems depend on precisely stabilized lasers for optimal performance. By enhancing the reliability of laser frequency stabilization, this work contributes to the advancement of next-generation atomic sensors with improved sensitivity and stability.
The nonlinear absorption or gain characteristics of an optical-frequency, Doppler-broadened atomic resonance involving levels with closely spaced structure are analyzed. The level structures are assumed to be resolved with respect to their natural widths, but not necessarily with respect to the Doppler width at the optical transition. The radiation field consists of two closely spaced monochromatic frequencies lying within the Doppler width of the resonance. This type of radiation field may be obtained, for example, from a laser operating in two of its Fabry-Perot resonator modes. It is shown that, because of saturation of level populations and double-quantum Raman transitions between levels, appreciable nonlinear coupling takes place between the two fields. This coupling shows a resonance behavior when the frequency separation of the two applied fields becomes equal to the frequency splitting between two of the components which form either level structure. The width of this resonance is determined entirely by the natural widths of these two level components and not by the Doppler width of the optical transition or the natural width of other level components. When such a resonance occurs, the over-all gain or attenuation characteristics of the atomic resonance change drastically. In practice the frequency spacing of the fields may be kept constant while the level structures are tuned, e.g., magnetically. The effects are analyzed for cases of running-wave and standing-wave radiation fields. The use of this effect in precise determination of level structures as well as mode or transition coupling of a gas laser is discussed. Portions of the analysis are applicable to resonances with more general forms of inhomogeneous broadening.
We consider the nonlinear propagation of an intense short pulse of polarized light through a molecular medium with ground- and excited-state absorption, excited-state emission, and fluorescence from the excited state to the ground state and possibly to a lower-lying excited state. We incorporate the effects of saturation, field-induced alignment, and rotational diffusion of the molecules in the medium. Our approach uses a slowly varying envelope approximation for the light propagation and rate equations for the effective parallel and perpendicular (and higher-multipole) population components of the molecular states. The time dependence of the anisotropy of the fluorescence occurring after preparation of the medium by the intense short pulse is determined. We can treat propagation through an optically nonthin medium wherein the intensity of the pulse decreases while propagating through the medium. An example of a 100-ps pulse propagating through a sample of Rhodamine-6G is presented. We compare our method with others used to describe intense-short-pulse propagation in molecular media.
The line shape of a Doppler-broadened transition is dramatically altered by the presence of a laser field resonating with a second Doppler-broadened transition sharing a common level: Two narrow resonances of different widths appear superimposed upon the broad background signal at frequencies symmetrically located about the corresponding line center. The effect has already found application in a number of seemingly different though intimately related studies, including high-resolution hfs and isotope-shift determinations. The theory of the effect is developed with reference to these applications. The treatment is formulated in terms of transition rates induced by two classical fields resonantly interacting with a pair of coupled Doppler-broadened transitions of arbitrary frequencies. The perturbation approach adopted is valid for one field fully saturating its transition; the resulting line-shape expression exhibits important power-broadening effects. This approach is equivalent to the familiar density-matrix formulation, which is also presented. Various features of the resulting expression are discussed in detail as they apply to two precision spectroscopic applications, mode crossing and spontaneous emission line narrowing. The connection with previous work is also discussed.
The features of resonance fluorescence and absorption of resonance laser radiation in atomic vapors in a superthin cell with thickness L of the order of a wavelength lambda are investigated theoretically. Taking into account the Fabry-Perot interference effect, it is found that the dependence of the fluorescence and absorption spectra on the ratio L/lambda is substantially different. Coherent spectral narrowing - the Dicke effect - when L=(2n+1)lambda/2 and broadening of the spectral line when L = n lambda (n is a whole number) are observed in the absorption spectra. This effect is absent in the spector of resonance fluorescence in extended media. It is also shown that the processes of saturation and optical pumping significantly alter the spectral line shape as the laser intensity increases; in particular, additional sub-Doppler dips appear at the frequency of the atomic transitions. Calculated curves are given for the D2 lines of ^85Rb atoms. © 2004 Optical Society of America