Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

An integrated 500 GHz receiver with superconducting local oscillator

V. P. Koshelets, S. V. Shitov, Lyudmila V. Filippenko, Andrey M. Baryshev, Willem Luinge, Hans Golstein, Herman van de Stadt, J. R. Gao, Th. de Graauw

Published Jun 1, 1997• 27 citations
Publisher

Abstract

An integrated quasioptical receiver consisting of a planar double-dipole antenna, SIS mixer and superconducting Flux-Flow Oscillator (FFO) with matching circuits has been designed, fabricated and tested in the frequency range 420-530 GHz. The integrated receiver is very suitable for space applications because of its low size, mass and power consumption. All components of the receiver are integrated on a 4 mm/spl times/4 mm/spl times/0.2 mm crystalline quartz substrate using a single Nb-AlO/sub x/-Nb trilayer. The successful operation of the integrated receiver comprising a number of new crucial elements has been demonstrated. A DSB noise temperature as low as 140 K at 500 GHz and a tuning range of more than 100 GHz have been obtained. A comparison of the FFO with conventional external LO has been performed.

DOI
10.1109/77.622178

Related papers

First implementation of a superconducting integrated receiver at 450 GHz

V. P. Koshelets, S. V. Shitov, Lyudmila V. Filippenko +6 more

An integrated quasioptical receiver consisting of a planar double dipole antenna, superconductor-insulator-superconductor mixer and a superconducting local oscillator (LO) with matching circuits has been designed, fabricated and tested in the frequency range 360–490 GHz. A flux-flow oscillator (FFO) based on unidirectional and viscous flow of magnetic vortexes in a long Josephson tunnel junction, is employed as a local oscillator. All components of the receiver are integrated on a 4 mm×4 mm×0.2 mm crystalline quartz substrate using a single Nb–AlOx–Nb trilayer. The lowest DSB noise temperature of 470–560 K has been achieved within a frequency range of 425–455 GHz.

Applied Physics Letters•Feb 26, 1996•77 citations

Integrated sub-MM wave receivers

V. P. Koshelets, S. V. Shitov, Andrey M. Baryshev +6 more

The concept of a fully integrated superconducting receiver looks very attractive for sub-mm space astronomy where low weight, power consumption and volume are required. The possibility to integrate on a few chips the different planar components: a SIS mixer, a superconducting local oscillator (LO), an intermediate frequency amplifier followed by superconducting circuits for digitizing and processing of down converted signals, is discussed. A first implementation of a real integrated quasioptical receiver for frequencies up to 500 GHz is described. The one-chip receiver comprises a double dipole antenna, parallel biased SIS array mixer and Josephson Flux Flow Oscillator (FFO) with matching circuits. The results of extensive investigations of the integrated receiver as well as design and investigation of novel superconducting elements are presented.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•28 citations

Integrated submm wave receiver with superconductive local oscillator

V. P. Koshelets, S. V. Shitov, Lyudmila V. Filippenko +4 more

A fully superconductive integrated receiver is very promising for submm space astronomy where low weight, low power consumption, and limited volume are required. The new versions of the integrated quasioptical submm wave receiver have been designed, fabricated and tested in the frequency range of 450-700 GHz. The integrated receiver chip comprises a planar double dipole antenna, SIS-mixer and on-chip superconductive Flux-Flow Oscillator (FFO) with matching circuits. The receiver noise temperature (DSB) as low as 140 K at 500 GHz has been obtained. A light-weight and low power consuming submm imaging array is under development. Each of 9 pixels of the array is realized by an all-Nb single-chip superconductive receiver, mounted on an elliptical silicon lens with anti-reflection coating. The experimental test results of one pixel receiver are presented. A computer based system is developed to control the operation of the integrated receiver.

•Jan 1, 1997•0 citations

A Superconducting Planar Integrated Receiver for the Frequency Range 430-480 GHz

S. V. Shitov, V. P. Koshelets, I.L. Lapitskaya +6 more

A planar receiver comprising a Josephson flux-flow oscillator (FF0), a double dipole antenna and a SIS mixer integrated on a single chip within an area of 3 x 3 mm has been realised in the frequency range of 400-500 GHz. RF tests have been performed at temperatures between 2 K and 4.2 K. A best DSB noise temperature of 595 K 20 K at 465 GHz was obtained for the receiver with the mixer pumped by the FFO. The width of the antenna beam has been measured referred to the input window of the cryostat and was about ± 4 degrees at the power level of about 20 dB. The power consumption of the whole device is estimated to be 20 p.W.

Softwaretechnik-Trends•Mar 1, 1995•1 citation

Study of a quasioptical superconducting integrated receiver for imaging applications at 400 - 700 GHz

S. V. Shitov, V. P. Koshelets, A. M. Baryshev +4 more

An imaging array receiver for the submillimeter wavelength is being developed. Each of 9 pixels of the array receiver is a single-chip superconducting receiver with dimensions 4 mm x 4 mm x 0.2 mm and contains a planar antenna, an all-Nb SIS mixer, a superconducting local oscillator (FFO) and the necessary coupling circuitry. A prototype design of the array receiver block, its optics and magnetic shielding are discussed. Experimental data for the integrated receiver for high frequency range of 550-700 GHz are reported. A first sample has shown receiver noise temperature of 560 K (DSB) at 645 GHz with optics optimized for 500 GHz. Smooth and permanent tuning has been demonstrated for the integrated LO over frequency range 610-700 GHz. To obtain ultimate coupling for both signals from the antenna and from the integrated LO, the integrated receiver concept with a quasioptical balanced SIS mixer is suggested.

Softwaretechnik-Trends•Jan 1, 1997•0 citations

Superconducting chip receivers for imaging application

S. V. Shitov, V. P. Koshelets, Andrey B. Ermakov +4 more

Experimental details of a unique superconducting imaging array receiver are discussed. Each pixel contains an internally pumped receiver chip mounted on the back of the elliptical microwave lens. Each chip comprises a quasi-optical SIS mixer integrated with a superconducting flux-flow oscillator (FFO) both fabricated from the same Nb/AlO/sub x//Nb trilayer on a silicon substrate. Properties of the integrated lens antenna were studied using an externally pumped reference SIS mixer which showed antenna sidelobes below /spl sim/17 dB and a receiver double side band noise temperature, T/sub RX/(DSB), below 100 K within the frequency range 460-500 GHz that is close to the quantum noise. For the imaging array T/sub RX/(DSB)=150 K has been measured at 500 GHz using the internal flux-flow oscillator as a local oscillator (LO). A balanced SIS mixer was tested showing T/sub RX/(DSB)<100 K within the range of 480-510 GHz using the internal LO. A computer system was developed to control simultaneously the dc bias of the SIS mixer and the frequency and power provided by FFO. The system also performs automatic optimization of the receiver noise temperature.

IEEE Transactions on Applied Superconductivity•Jun 1, 1999•28 citations
An integrated quasioptical receiver consisting of a planar double-dipole antenna, SIS mixer and superconducting Flux-Flow Oscillator (FFO) with matching circuits has been designed, fabricated and tested in the frequency range 420-530 GHz. The integrated receiver is very suitable for space applications because of its low size, mass and power consumption. All components of the receiver are integrated on a 4 mm/spl times/4 mm/spl times/0.2 mm crystalline quartz substrate using a single Nb-AlO/sub x/-Nb trilayer. The successful operation of the integrated receiver comprising a number of new crucial elements has been demonstrated. A DSB noise temperature as low as 140 K at 500 GHz and a tuning range of more than 100 GHz have been obtained. A comparison of the FFO with conventional external LO has been performed.
An integrated quasioptical receiver consisting of a planar double dipole antenna, superconductor-insulator-superconductor mixer and a superconducting local oscillator (LO) with matching circuits has been designed, fabricated and tested in the frequency range 360–490 GHz. A flux-flow oscillator (FFO) based on unidirectional and viscous flow of magnetic vortexes in a long Josephson tunnel junction, is employed as a local oscillator. All components of the receiver are integrated on a 4 mm×4 mm×0.2 mm crystalline quartz substrate using a single Nb–AlOx–Nb trilayer. The lowest DSB noise temperature of 470–560 K has been achieved within a frequency range of 425–455 GHz.
The concept of a fully integrated superconducting receiver looks very attractive for sub-mm space astronomy where low weight, power consumption and volume are required. The possibility to integrate on a few chips the different planar components: a SIS mixer, a superconducting local oscillator (LO), an intermediate frequency amplifier followed by superconducting circuits for digitizing and processing of down converted signals, is discussed. A first implementation of a real integrated quasioptical receiver for frequencies up to 500 GHz is described. The one-chip receiver comprises a double dipole antenna, parallel biased SIS array mixer and Josephson Flux Flow Oscillator (FFO) with matching circuits. The results of extensive investigations of the integrated receiver as well as design and investigation of novel superconducting elements are presented.>
A fully superconductive integrated receiver is very promising for submm space astronomy where low weight, low power consumption, and limited volume are required. The new versions of the integrated quasioptical submm wave receiver have been designed, fabricated and tested in the frequency range of 450-700 GHz. The integrated receiver chip comprises a planar double dipole antenna, SIS-mixer and on-chip superconductive Flux-Flow Oscillator (FFO) with matching circuits. The receiver noise temperature (DSB) as low as 140 K at 500 GHz has been obtained. A light-weight and low power consuming submm imaging array is under development. Each of 9 pixels of the array is realized by an all-Nb single-chip superconductive receiver, mounted on an elliptical silicon lens with anti-reflection coating. The experimental test results of one pixel receiver are presented. A computer based system is developed to control the operation of the integrated receiver.
A planar receiver comprising a Josephson flux-flow oscillator (FF0), a double dipole antenna and a SIS mixer integrated on a single chip within an area of 3 x 3 mm has been realised in the frequency range of 400-500 GHz. RF tests have been performed at temperatures between 2 K and 4.2 K. A best DSB noise temperature of 595 K 20 K at 465 GHz was obtained for the receiver with the mixer pumped by the FFO. The width of the antenna beam has been measured referred to the input window of the cryostat and was about ± 4 degrees at the power level of about 20 dB. The power consumption of the whole device is estimated to be 20 p.W.
An imaging array receiver for the submillimeter wavelength is being developed. Each of 9 pixels of the array receiver is a single-chip superconducting receiver with dimensions 4 mm x 4 mm x 0.2 mm and contains a planar antenna, an all-Nb SIS mixer, a superconducting local oscillator (FFO) and the necessary coupling circuitry. A prototype design of the array receiver block, its optics and magnetic shielding are discussed. Experimental data for the integrated receiver for high frequency range of 550-700 GHz are reported. A first sample has shown receiver noise temperature of 560 K (DSB) at 645 GHz with optics optimized for 500 GHz. Smooth and permanent tuning has been demonstrated for the integrated LO over frequency range 610-700 GHz. To obtain ultimate coupling for both signals from the antenna and from the integrated LO, the integrated receiver concept with a quasioptical balanced SIS mixer is suggested.
Experimental details of a unique superconducting imaging array receiver are discussed. Each pixel contains an internally pumped receiver chip mounted on the back of the elliptical microwave lens. Each chip comprises a quasi-optical SIS mixer integrated with a superconducting flux-flow oscillator (FFO) both fabricated from the same Nb/AlO/sub x//Nb trilayer on a silicon substrate. Properties of the integrated lens antenna were studied using an externally pumped reference SIS mixer which showed antenna sidelobes below /spl sim/17 dB and a receiver double side band noise temperature, T/sub RX/(DSB), below 100 K within the frequency range 460-500 GHz that is close to the quantum noise. For the imaging array T/sub RX/(DSB)=150 K has been measured at 500 GHz using the internal flux-flow oscillator as a local oscillator (LO). A balanced SIS mixer was tested showing T/sub RX/(DSB)<100 K within the range of 480-510 GHz using the internal LO. A computer system was developed to control simultaneously the dc bias of the SIS mixer and the frequency and power provided by FFO. The system also performs automatic optimization of the receiver noise temperature.