We present our semiempirical approach for modeling Dark Count Rate (DCR) and Quantum Efficiency (QE) of current biased Superconducting Nanowire Single Photon Detectors (SNSPDs). Using the qualitative outcomes of the present SNSPD models, we define new quantitative parameters including hotspot lifetime, resistive barrier generation rates and detector dead time to mathematically integrate different physical phenomena of the device into a unified model. The capability of the model to predict the outcomes of the measurements is demonstrated by reporting the details of the supporting experiments and showing a good agreement between simulation and experimental results.
We present our semiempirical approach for modeling Dark Count Rate (DCR) and Quantum Efficiency (QE) of current biased Superconducting Nanowire Single Photon Detectors (SNSPDs). Using the qualitative outcomes of the present SNSPD models, we define new quantitative parameters including hotspot lifetime, resistive barrier generation rates and detector dead time to mathematically integrate different physical phenomena of the device into a unified model. The capability of the model to predict the outcomes of the measurements is demonstrated by reporting the details of the supporting experiments and showing a good agreement between simulation and experimental results.
Superconducting nanowire single-photon detectors (SNSPDs) can be made sensitive to single photons with near-unity detection efficiency, ultra-low dark-count rates, and sub-nanosecond timing jitter over a broad wavelength range. However, many studies report data inconsistently, often emphasizing a single performance metric without considering overall device performance. This inconsistent data reporting limits the field, as it makes it difficult to determine which device characteristics are most important. Different applications require functionalities that may conflict with one another; for example, longer-wavelength operation may require lower operating temperatures. Moreover, there is no universally accepted metric for defining the figures of merit of an SNSPD. In this work, we amass a dataset representing the state of the art of SNSPD fabrication, including operating temperature, operating wavelength, photon count rates (PCR), and dark count rates (DCR). We fit the PCR curves and suggest using the saturation plateau length to gauge the SNSPD's sensitivity. We then fit the DCR and compare the PCR and DCR. Using this approach, we establish a quantitative framework to determine the optimal biasing condition for a given device and to determine the device's sensitivity at that optimal biasing condition, enabling meaningful comparisons across disparate devices. Additionally, we offer concrete benchmarks for measuring device performance.
Predicting the behavior of superconducting nanowire single-photon detectors (SNSPDs) is important as their use becomes more widespread in fields ranging from quantum computing to quantum remote sensing. Here, we present a vortex-crossing theory of photon detection that provides a unified definition of system detection efficiency and dark-count rates. Our approach quantitatively captures the plateau region of system detection efficiency for NbN- and WSi-based SNSPDs. We concurrently predict the temperature dependence of dark-count rates and the intrinsic timing jitter of SNSPDs. We extensively benchmark our model against various experiments to aid in the design of the next generation of SNSPDs.
Superconducting nanowire single-photon detectors (SNSPDs) have demonstrated remarkable efficiency, timing resolution, and intrinsic dark count rate properties, but the SNSPD community currently lacks a comprehensive model of the single-photon detection process. In this work, we conduct a detailed examination of the current detection mechanism models and compare their predictions to new experimental measurements of the intrinsic timing properties and polarization dependence of specialized NbN test devices. First, we consider the energy downconversion cascade using the kinetic equations to describe the non-equilibrium electron and phonon systems immediately following photon absorption. These calculations provide estimates for the energy loss and fluctuations during this process, and provide qualitative information about the way energy is partitioned between the electron and phonon systems. To study the suppression of superconductivity following downconversion, we apply the most advanced existing model, that of Vodolazov (2017), but find it inadequate to quantitatively describe the timing properties of these detectors. By extending the model to use the generalized time-dependent Ginzburg-Landau equations, we achieve better quantitative agreement with experiment. However, the generalized model still provides only a qualitative picture of the detection process. We also conduct an experimental examination of the heat transfer process in WSi nanowires by examining the nanowire reset dynamics, steady-state dissipation, and crosstalk between elements of an array. The results are compared to existing electrothermal models, but these models fail to adequately describe the dynamics of the system. A generalized form of the electrothermal model provides better fitting to experiment, but incorporation of non-equilibrium effects is likely needed to provide a fully quantitative description of the system. These results are directly connected to some of the thermal challenges of SNSPD array development. Informed by the crosstalk results, we demonstrate a new multiplexing technique based on thermal coupling between two active nanowire layers, known as the thermal row-column. This method promises to enable kilopixel to megapixel scale imaging arrays for low photon-flux applications. Finally, we discuss the design and characterization of the ground detector for the Deep Space Optical Communication (DSOC) demonstration mission.
Superconducting nanowire single-photon detectors (SNSPDs) are an attractive technology for applications which benefit from high-count rate photon detection such as quantum communication protocols, photon-starved classical communications, metrology of single-emitters, and photonic quantum computing. However, at high-count rates, a significant portion of photons may be incident during recovery intervals following prior detection events. After detection, the device efficiency recovers over nanoseconds to tens of nanoseconds before reaching a steadystate value. Therefore, for a given SNSPD bias current setpoint, a single efficiency and recovery time specification may not be sufficient to characterize the performance of a device at high count rates. Here we present and experimentally validate a model of the recovery time as a function of bias current for any given system efficiency. These results may be used to improve analysis of measurements performed using SNSPDs operating in the high count rate regime.
In this paper, we theoretically show that a multi-layer superconducting nanowire single-photon detector (SNSPD) is capable of approaching characteristics of an ideal SNSPD in terms of the quantum efficiency, dark count, and band-width. A multi-layer structure improves the performance in two ways. First, the potential barrier for thermally activated vortex crossing, which is the major source of dark counts and the reduction of the critical current in SNSPDs is elevated. In a multi-layer SNSPD, a vortex is made of 2D-pancake vortices that form a stack. It will be shown that the stack of pancake vortices effectively experiences a larger potential barrier compared to a vortex in a single-layer SNSPD. This leads to an increase in the experimental critical current as well as significant decrease in the dark count rate. In consequence, an increase in the quantum efficiency for photons of the same energy or an increase in the sensitivity to photons of lower energy is achieved. Second, a multi-layer structure improves the efficiency of single-photon absorption by increasing the effective optical thickness without compromising the single-photon sensitivity.
Superconducting nanowire single-photon detectors have emerged as a promising technology for quantum metrology from the mid-infrared to ultraviolet frequencies. Despite recent experimental successes, a predictive model to describe the detection event in these detectors is needed to optimize the detection metrics. Here, we propose a probabilistic criterion for single-photon detection based on single-vortex (flux quanta) crossing the width of the nanowire. Our model makes a connection between the dark counts and photon counts near the detection threshold. The finite-difference calculations demonstrate that a change in the bias current distribution as a result of the photon absorption significantly increases the probability of single-vortex crossing even if the vortex potential barrier has not vanished completely. We estimate the instrument response function and show that the timing uncertainty of this vortex tunneling process corresponds to a fundamental limit in timing jitter of the click event. We demonstrate a trade-space between this intrinsic (quantum) timing jitter, quantum efficiency, and dark count rate in TaN, WSi, and NbN superconducting nanowires at different experimental conditions. Our detection model can also explain the experimental observation of exponential decrease in the quantum efficiency of SNSPDs at lower energies. This leads to a pulse-width dependency in the quantum efficiency, and it can be further used as an experimental test to compare across different detection models.