Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Symposium on Multiple-Valued Logic (ISMVL)

JCTL: a Josephson complementary ternary logic circuit

Michitada Morisue, Kentaro Ochi, M. Nishizawa

Published Jan 1, 1988• 7 citations
Publisher

Abstract

A novel complementary ternary logic circuit using Josephson junctions as switching gates is described. The principle of the circuit is based on the tristate of a Josephson junction, that is the state of switching in either positive direction or negative direction, in addition to the state of no switching. The JCTL is constructed of two SQUIDs (superconducting quantum interference devices), one of which is switched in the positive directions and the other in the negative direction. The JCTL can perform the fundamental operations of AND, OR, and NOT in ternary form and can function as a full adder if the voltage-current characteristics of the two SQUIDs are adjusted appropriately. The advantage of the JCTL is its higher speed of operation with higher density than the conventional Josephson binary logic circuit. The principle of operation is described in detail, and simulation results are presented.>

DOI
10.1109/ismvl.1988.5156

Related papers

A novel ternary logic circuit using Josephson junction

Michitada Morisue, K. Oochi, M. Nishizawa

A novel Josephson complementary ternary logic (JCTL) circuit is described. This fundamental circuit is based on the combination of two SQUIDs (superconducting quantum interference devices), one of which is switched in the positive direction and the other in the negative direction. The JCTL can perform the fundamental operations of AND, OR, NOT, and Double NOT in ternary form. The principle of the operation and design criteria are described in detail. Simulation results show that reliable operation of these circuits can be achieved with a high performance.>

IEEE Transactions on Magnetics•Mar 1, 1989•6 citations

A novel Josephson ternary multiplier

Michitada Morisue, Jun Endo, T. Morooka +2 more

A novel Josephson ternary logic circuit to perform multiplication is proposed. The fundamental circuit of the multiplier is based on Josephson complementary ternary logic circuit (JCTL). In this paper the principle of the ternary multiplier is described. We have fabricated the multiplier using SQUIDs which were made of Nb/AlOx/Al/Nb junctions, and measurements of the logic operation of the circuit were carried out. The results showed satisfactory operation of the multiplier, which agreed well with the results of simulation. The advantages of the proposed ternary multiplier are capability of ultra-high speed computation, low power consumption and very simple construction with less number of elements to perform a ternary multiplication.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•2 citations

A parallel full adder circuit using Josephson junctions

S. Hasuo, Hideo Suzuki, Kouichi Dazai

Detailed investigations have been carried out on a Josephson parallel full adder as an example of a functional circuit using Josephson junctions. This circuit can be constructed with fewer devices as compared with conventional Josephson adders. Two-junction interferometers (d.c.-SQUIDs) are utilized as switching elements of the circuit. Only (2N+1) d.c.-SQUIDs are required for construction of an N bit circuit. Discussions focus on design theory of the full adder circuit. An experimental 4 bit circuit operation is also demonstrated.

IEEE Journal of Solid-State Circuits•Feb 1, 1981•3 citations

Complementary Josephson junction devices and circuits: a possible new approach to superconducting electronics

Esin Terzioglu, M. R. Beasley

We present a superconducting logic family whose operation relies on the availability of a current gain greater than one, based on the analogy to semiconductor complementary metal-oxide-semiconductor (CMOS) logic family. The Complementary Josephson Junction (CJJ) logic family utilizes two types of nonlatching devices: a conventional device and a complementary device. The conventional device has a finite critical current, and the complementary device has zero critical current with no input applied. When the input is high, the complementary device has a finite critical current, while the conventional device has zero critical current. The bias current can be steered between a branch with a complementary device and a branch with a conventional device performing logic (and memory) functions. We can also use a resistor as a load to a complementary device. We call this circuit topology the Resistor Complementary Josephson Junction (RCJJ) family. It is analogous to the semiconductor PMOS/resistor logic family. In this paper, we investigate methods of realizing complementary devices, and we present a preliminary analysis of speed, margins, and power dissipation in simple CJJ and RCJJ inverter circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 1998•105 citations

Superconductive logic circuits constructed by the use of two thresholds of SQUID

Masahiro Kawai, Yoichiro Sato, Hiroto Kagotani +1 more

This paper proposes a method for constructing superconductive logic circuits by actively using two thresholds in a superconducting quantum interference device (SQUID). First, it is demonstrated that the input–output characteristics of a SQUID with multiple inputs can be represented as a two-threshold logic function. Next, a SQUID structure is shown in which all of the input currents have the same significance and the threshold current can be varied without varying the characteristics of the Josephson junction. Each input is weighted by adjusting the internal impedance rather than the input current, and the SQUID thresholds are varied using the value of the steady current applied to an additional input. Finally, it is explained that when logic functions of two to four variables are realized using such SQUIDs, the number of logic functions that can be realized with a single SQUID is much greater than when an existing method is used, and the operating regions are reduced only slightly. © 2005 Wiley Periodicals, Inc. Syst Comp Jpn, 36(2): 42–50, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/scj.20136

Systems and Computers in Japan•Jan 1, 2005•0 citations

Direct-coupled Josephson full adder

J. H. Magerlein, L. N. Dunkleberger

We describe a one-bit full adder circuit constructed from direct-coupled Josephson logic elements. The basic gate, which can perform various logic functions, consists of two Josephson junctions and two resistors connected in a loop. Switching the junctions into the finite-voltage state diverts the bias current into a parallel output line, which is directly coupled through the junctions of successive logic elements. The adder is constructed with a 100 μm basic linewidth and 25 μm square tin tunnel junctions. It operates under all input data conditions with an add time of about 1 nS and a power dissipation of 1 μW per gate.

IEEE Transactions on Magnetics•Jan 1, 1977•7 citations
A novel complementary ternary logic circuit using Josephson junctions as switching gates is described. The principle of the circuit is based on the tristate of a Josephson junction, that is the state of switching in either positive direction or negative direction, in addition to the state of no switching. The JCTL is constructed of two SQUIDs (superconducting quantum interference devices), one of which is switched in the positive directions and the other in the negative direction. The JCTL can perform the fundamental operations of AND, OR, and NOT in ternary form and can function as a full adder if the voltage-current characteristics of the two SQUIDs are adjusted appropriately. The advantage of the JCTL is its higher speed of operation with higher density than the conventional Josephson binary logic circuit. The principle of operation is described in detail, and simulation results are presented.>
A novel Josephson complementary ternary logic (JCTL) circuit is described. This fundamental circuit is based on the combination of two SQUIDs (superconducting quantum interference devices), one of which is switched in the positive direction and the other in the negative direction. The JCTL can perform the fundamental operations of AND, OR, NOT, and Double NOT in ternary form. The principle of the operation and design criteria are described in detail. Simulation results show that reliable operation of these circuits can be achieved with a high performance.>
A novel Josephson ternary logic circuit to perform multiplication is proposed. The fundamental circuit of the multiplier is based on Josephson complementary ternary logic circuit (JCTL). In this paper the principle of the ternary multiplier is described. We have fabricated the multiplier using SQUIDs which were made of Nb/AlOx/Al/Nb junctions, and measurements of the logic operation of the circuit were carried out. The results showed satisfactory operation of the multiplier, which agreed well with the results of simulation. The advantages of the proposed ternary multiplier are capability of ultra-high speed computation, low power consumption and very simple construction with less number of elements to perform a ternary multiplication.
Detailed investigations have been carried out on a Josephson parallel full adder as an example of a functional circuit using Josephson junctions. This circuit can be constructed with fewer devices as compared with conventional Josephson adders. Two-junction interferometers (d.c.-SQUIDs) are utilized as switching elements of the circuit. Only (2N+1) d.c.-SQUIDs are required for construction of an N bit circuit. Discussions focus on design theory of the full adder circuit. An experimental 4 bit circuit operation is also demonstrated.
We present a superconducting logic family whose operation relies on the availability of a current gain greater than one, based on the analogy to semiconductor complementary metal-oxide-semiconductor (CMOS) logic family. The Complementary Josephson Junction (CJJ) logic family utilizes two types of nonlatching devices: a conventional device and a complementary device. The conventional device has a finite critical current, and the complementary device has zero critical current with no input applied. When the input is high, the complementary device has a finite critical current, while the conventional device has zero critical current. The bias current can be steered between a branch with a complementary device and a branch with a conventional device performing logic (and memory) functions. We can also use a resistor as a load to a complementary device. We call this circuit topology the Resistor Complementary Josephson Junction (RCJJ) family. It is analogous to the semiconductor PMOS/resistor logic family. In this paper, we investigate methods of realizing complementary devices, and we present a preliminary analysis of speed, margins, and power dissipation in simple CJJ and RCJJ inverter circuits.
This paper proposes a method for constructing superconductive logic circuits by actively using two thresholds in a superconducting quantum interference device (SQUID). First, it is demonstrated that the input–output characteristics of a SQUID with multiple inputs can be represented as a two-threshold logic function. Next, a SQUID structure is shown in which all of the input currents have the same significance and the threshold current can be varied without varying the characteristics of the Josephson junction. Each input is weighted by adjusting the internal impedance rather than the input current, and the SQUID thresholds are varied using the value of the steady current applied to an additional input. Finally, it is explained that when logic functions of two to four variables are realized using such SQUIDs, the number of logic functions that can be realized with a single SQUID is much greater than when an existing method is used, and the operating regions are reduced only slightly. © 2005 Wiley Periodicals, Inc. Syst Comp Jpn, 36(2): 42–50, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/scj.20136
We describe a one-bit full adder circuit constructed from direct-coupled Josephson logic elements. The basic gate, which can perform various logic functions, consists of two Josephson junctions and two resistors connected in a loop. Switching the junctions into the finite-voltage state diverts the bias current into a parallel output line, which is directly coupled through the junctions of successive logic elements. The adder is constructed with a 100 μm basic linewidth and 25 μm square tin tunnel junctions. It operates under all input data conditions with an add time of about 1 nS and a power dissipation of 1 μW per gate.