Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Technical digest - International Electron Devices Meeting/Technical digest

Spectral hole burning of InAs self-assembled quantum dots written by two different lasers

Yoshihiro Sugiyama, Yoshihiro Nakata, Shunichi Muto, T. Futatsugi, Naoki Yokoyama

Published Nov 28, 2002• 1 citation
Publisher

Abstract

We report, for the first time, the two spectral holes in photocurrent of InAs self-assembled quantum dots embedded in a p-i-n diode irradiated by two different lasers. The estimated homogeneous broadening of less than 30 /spl mu/ eV for InAs QD implies the possibility of wavelength multiplicity of /spl ges/2800 for hole burning memory using QD. The spectral hole width irradiated by single mode YAG laser at 1064 nm showed temperature dependence of exp(T/30.9) in the range from 5 K to 80 K.

DOI
10.1109/iedm.1998.746394

Related papers

Observation of spectral hole burning in photocurrentspectrum of InAs self-assembled quantum dots embedded in pin diode

Yoshihiro Sugiyama, Yoshihiro Nakata, Shunichi Muto +4 more

The spectral hole burning of InAs self-assembled quantum dots (QDs) embedded in a pin diode has been observed for the first time. The spectral hole depth increases as the electric field is increased. By numerical fitting to experimental results, the possibility of wavelength-domain multiplicity in optical memory by using InAs QDs is shown.

Electronics Letters•Sep 11, 1997•14 citations

Dynamic properties of InAs self-assembled quantum dots for spectral hole burning memory application

Naoto Horiguchi, T. Futatsugi, Yoshihiro Nakata +1 more

In this paper we report the dynamic properties of InAs self-assembled quantum dots for spectral hole burning memory applications. We measured the time constant of electron transport between InAs self-assembled quantum dots and the n-GaAs substrate by making use of the frequency dependence of the CV signal due to the InAs dots. We obtained a time constant of 2.1 /spl mu/s from experiments. The experimental results are well explained by equivalent circuit calculations and the theoretically calculated CR time constant. The time constant is expected to reach the sub-picosecond range in samples with a 10 nm barrier thickness.

Technical digest - International Electron Devices Meeting/Technical digest•Dec 23, 2002•0 citations

High-resolution spectral hole burning in InGaAs-GaAs quantum dots

Joseph J. Berry, Martin J. Stevens, Richard P. Mirin +1 more

We report the use of continuous wave spectral hole burning to perform high-resolution spectroscopy of the homogeneous linewidth of self-assembled InGaAs-GaAs quantum dots at low temperature. We use this technique to examine the power broadening behavior of the homogeneous InGaAs-GaAs quantum dot line. We find that at a temperature of 9.8 K and over the majority of the pump powers considered, the spectral hole signal is well fit by a single Lorentizian line shape. Analysis of the power broadening yields a full width at half maximum of 0.74μeV for the homogeneous linewidth and a corresponding coherence time T2 of 1.76 ns.

Applied Physics Letters•Feb 6, 2006•26 citations

Application of spectral-hole burning in the inhomogeneously broadened gain of self-assembled quantum dots to a multiwavelength-channel nonlinear optical device

T. Akiyama, Haruhiko Kuwatsuka, Takashi Simoyama +5 more

A nonlinear device capable of handling multiple wavelength channels simultaneously by using spectral-hole burning in the inhomogeneous broadening of the gain in self-assembled quantum dots is proposed. The multichannel property of this device stems from the localized absorption or gain change at the pump wavelength within the inhomogeneously broadened gain spectrum. The spectral width of the modulation and its time evolution was also evaluated. The result indicates the applicability of this device to multichannel operation.

IEEE Photonics Technology Letters•Oct 1, 2000•73 citations

Spectral hole burning by storage of electrons or holes

Till Warming

Spectral hole burning in spectra of self‐organized InAs/GaAs quantum dots is demonstrated. Resonant charging with holes and for the first time with electrons is observed as saturation in the absorption spectra. This enables investigations on longer time scales than the lifetime of radiative recombination, in view of quantum dot memory devices or spin storage. Varying temperatures and excitation densities reveal the character of carrier escape mechanisms.

AIP conference proceedings•Jan 1, 2005•0 citations

Dephasing in InAs/GaAs quantum dots

Paola Borri, W. Langbein, Jesper Mørk +4 more

The room-temperature dephasing in InAs/GaAs self-assembled quantum dots is measured using two independent methods: spectal-hole burning and four-wave mixing. Dephasing times weakly dependent on the excitation density are found, with a low density value of $290\ifmmode\pm\else\textpm\fi{}80 \mathrm{fs}$ from spectal-hole burning and of $260\ifmmode\pm\else\textpm\fi{}20 \mathrm{fs}$ from four-wave mixing.

Physical review. B, Condensed matter•Sep 15, 1999•135 citations
We report, for the first time, the two spectral holes in photocurrent of InAs self-assembled quantum dots embedded in a p-i-n diode irradiated by two different lasers. The estimated homogeneous broadening of less than 30 /spl mu/ eV for InAs QD implies the possibility of wavelength multiplicity of /spl ges/2800 for hole burning memory using QD. The spectral hole width irradiated by single mode YAG laser at 1064 nm showed temperature dependence of exp(T/30.9) in the range from 5 K to 80 K.
In this paper we report the dynamic properties of InAs self-assembled quantum dots for spectral hole burning memory applications. We measured the time constant of electron transport between InAs self-assembled quantum dots and the n-GaAs substrate by making use of the frequency dependence of the CV signal due to the InAs dots. We obtained a time constant of 2.1 /spl mu/s from experiments. The experimental results are well explained by equivalent circuit calculations and the theoretically calculated CR time constant. The time constant is expected to reach the sub-picosecond range in samples with a 10 nm barrier thickness.
We report the use of continuous wave spectral hole burning to perform high-resolution spectroscopy of the homogeneous linewidth of self-assembled InGaAs-GaAs quantum dots at low temperature. We use this technique to examine the power broadening behavior of the homogeneous InGaAs-GaAs quantum dot line. We find that at a temperature of 9.8 K and over the majority of the pump powers considered, the spectral hole signal is well fit by a single Lorentizian line shape. Analysis of the power broadening yields a full width at half maximum of 0.74μeV for the homogeneous linewidth and a corresponding coherence time T2 of 1.76 ns.
A nonlinear device capable of handling multiple wavelength channels simultaneously by using spectral-hole burning in the inhomogeneous broadening of the gain in self-assembled quantum dots is proposed. The multichannel property of this device stems from the localized absorption or gain change at the pump wavelength within the inhomogeneously broadened gain spectrum. The spectral width of the modulation and its time evolution was also evaluated. The result indicates the applicability of this device to multichannel operation.