In this paper we propose a method to decelerate polar molecules in a ring electrode. Trapped molecules rotate around the ring-axis, whose rotation radius can be changed arbitrarily. On increasing the rotation radius, the tangential velocity decreases keeping the angular momentum around the ring axis constant.
Abstract Stark deceleration is a technique that uses time-varying inhomogeneous electric fields to decelerate polar molecules for various molecular beam and trapping experiments. New ring-geometry Stark decelerators with continuously varying voltages offer a method to produce a more intense source of molecules than in the more typically used crossed-pin geometry Stark decelerators. However, this new technique, traveling-wave Stark deceleration, is more experimentally challenging due to the electronic requirements. A third method, pulsed-ring Stark deceleration, uses ring-geometry electrodes with high-voltage pulses to decelerate molecules. The discrete voltages make it easier to implement, and it is more efficient in certain situations due to an increased longitudinal potential gradient. Here, we present an experimental realization of a ring-geometry Stark decelerator using both continuously varying and discrete voltages. Using the pulsed-ring method, we demonstrate a newly accessible low-velocity regime for moderate peak voltages on ring electrodes. This opens up the opportunity to efficiently decelerate various molecular species using a medium length decelerator. A comparison of experimental and simulated results between traveling-wave and pulsed-ring Stark deceleration is presented along with a simple model for determining when each mode is more efficient.
We have recently demonstrated static trapping of ammonia isotopologues in a decelerator that consists of a series of ring-shaped electrodes to which oscillating high voltages are applied [Quintero-P\'erez et al., Phys. Rev. Lett. 110, 133003 (2013)]. In this paper we provide further details about this traveling-wave decelerator and present new experimental data that illustrate the control over molecules that it offers. We analyze the performance of our setup under different deceleration conditions and demonstrate phase-space manipulation of the trapped molecular sample.
We are setting up a novel type of Stark-decelerator optimized for the deceleration and trapping of heavy diatomic molecules. Aim of these experiments is to prepare a trapped sample of ultracold molecules for precision studies of fundamental symmetries. The decelerator uses ring-shaped electrodes to create a moving trapping potential, a prototype of which has been shown to work for CO molecules nderline{\textbf{81}} (51401), 2010.}. Molecules can be decelerated and trapped in the weak-field seeking part of excited rotational states. The alkaline-earth monohalide molecules (currently we focus on the SrF molecule) are prime candidates for next generation parity violation and electron-EDM studies nderline{\textbf{82}} (52521), 2010}. We plan to combine the Stark deceleration with molecular laser cooling to create a trapped sample of molecules at a final temperature of ∼ 200 μK.
We have set up up a travelling-wave Stark-decelerator optimised for the deceleration and trapping of heavy diatomic molecules. This decelerator is an important first step in the optimal preparation of heavy diatomic molecules for sensitive studies of fundamental symmetries. The decelerator uses ring-shaped electrodes to create a moving trapping potential, that can be brought to a standstill in the laboratory frame by electronic control. With such a device, a wide range of molecules in the weak-field seeking part of excited rotational states can be decelerated and trapped. We demonstrate the working principle of our method using SrF molecules, which are well suited to probe for parity violation.
Inspired by the spectacular successes in the field of cold atoms, there is currently great interest in cold molecules. Cooling molecules is useful for various fundamental physics studies and gives access to an exotic regime in chemistry where the wave property of the molecules becomes important. Although cooling molecules has turned out to be considerably more difficult than cooling atoms, a number of methods to produce samples of cold molecules have been demonstrated over the last few years. This paper aims to review the application of cold molecules and the methods to produce them. Emphasis is put on the deceleration of polar molecules using time-varying electric fields. The operation principle of the array of electrodes that is used to decelerate polar molecules is described in analogy with, and using terminology from, charged-particle accelerators. It is shown that, by applying an appropriately timed high voltage burst, molecules can be decelerated while the phase-space density, i.e. the number of molecules per position-velocity interval, remains constant. In this way the high density and low temperature in the moving frame of a pulsed molecular beam can be transferred to the laboratory frame. Experiments on metastable CO in states that are either repelled by or attracted to high electric fields are presented. Loading of slow molecules into traps and storage rings is discussed.
We have demonstrated experimentally that polar molecules revolve around the inner electrode of a charged cylindrical capacitor in helical trajectories that result from a superposition of a translational motion along and an orbital motion around the cylinder axis. In this way molecular beams can be guided over any given distance. The results have been obtained for nozzle beams of NaCl, NaBr, and NaI seeded in Kr. The capacitor bent into a toroid may be used as a storage ring for polar molecules in high field seeking rotational states.