Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Communications Technology and Electronics

Analysis of spectral characteristics of a superconducting integrated receiver

V. P. Koshelets, Andrey V. Khudchenko

Published May 1, 2006• 1 citation
Publisher

Abstract

Frequency down-conversion of a received signal in an integrated receiver with a superconducting heterodyne oscillator is simulated. The effect of the nonideal heterodyne spectrum on the transformation is assessed. The possibility of elimination of distortions introduced by the heterodyne in the course of the input spectrum reconstruction is investigated. A new method for signal spectrum reconstruction is proposed and studied. The effect of noise at the receiver output on the reconstructed spectrum of the original signal is studied. The requirements for the heterodyne spectral parameters providing for the necessary accuracy of reconstruction are determined.

DOI
10.1134/s1064226906050135

Related papers

Study on Frequency Up-Conversion Characteristic in SIS Mixers and its Application

雄人 上月

Superconductor-insulator-superconductor (SIS) junctions, which are low-noise heterodyne mixers, have been used as frequency converters.In recent years, ultralow power consumption of receiver components has become essential to increase the scale and integration of receiver systems.In this paper, we explore the performance of SIS mixers, which have been widely used as a low-noise frequency down-converter in the field of radio astronomy, as a frequency up-converter and discuss the possibility of its application to low-noise microwave amplifiers with ultra-low power consumption.In this study, we investigate the characteristics of the SIS upconverters, clarifying the conditions for gain generation in up-conversion.This research will lead to the realization of ultra-low-power amplifiers based on SIS mixers, which will solve the problem of increasing power consumption in future receiver systems.Chapter 1 describes the background of the research, including the ongoing problem of the increasing scale of receiving systems and the associated power consumption of low-noise amplifiers in the field of high-sensitivity reception, the history of the research on heterodyne mixing using SIS mixers, and the significance and policy of the research.Chapter 2 describes the theoretical background relevant to this study and discusses the basic properties of SIS junctions as heterodyne mixers.In Chapter 3, we describe the numerical analysis conducted to clarify the upconversion characteristics of the SIS mixer.In Chapter 4, we describe the mixing characteristics of SIS junctions at 40 GHz by constructing a new experimental system that directly measures the characteristics of heterodyne mixers. IVIn Chapter 5, a new experimental system is constructed using an existing SIS mixer developed as a down-converter for W-band, and the up-conversion gain characteristics in the 100 GHz band are described.Chapter 6 describes a demonstration experiment that shows the potential of the SIS mixer to be applied to ultra-low-power low-noise microwave amplifiers.Chapter 7 summarizes the paper and discusses the challenges and prospects for future realization and application of ultra-low-power amplifiers.V

•Mar 24, 2022•0 citations

Low-Noise Superconducting Mixers for the Terahertz Frequency Range

Victor Y. Belitsky, Serguei Cherednichenko, Dag Winkler

This chapter discusses the high sensitivity superconducting mixers, i.e. detectors used in heterodyne receivers. Today, there are essentially two very successful concepts of superconducting mixers, or frequency down-converters, the superconductor-insulator-superconductor tunnel junction SIS mixer and the superconducting hot-electron bolometer mixer. Moving up to higher frequencies in the microwave and millimeter wave electromagnetic spectra makes it more and more difficult to retrieve a good signal-to-noise ratio with ordinary solid-state amplifiers. The driving force for using superconducting mixers is their excellent down-conversion efficiency and capability to down-convert RF signals from microwave frequencies up to the terahertz region. The main purpose of a receiver is to pick up and amplify a weak signal, which can then be accurately determined in amplitude and phase. The mixer noise temperature and conversion gain are the most important parameters for the mixing device. The Josephson junction mixer was one of the first suggested devices based on superconducting point contacts and later tunnel junctions.

CRC Press eBooks•May 17, 2022•1 citation

A technique for noise measurements of SIS receivers

Qing Ke, M. J. Feldman

We present a simple new technique to determine the noise temperature of the RF input section of a superconducting quasiparticle heterodyne receiver. This quantity is difficult to measure by existing methods. The new technique uses standard hot/cold-load measurements, and the precision should be as good as the hot/cold-load determination of receiver noise temperature. For most receivers, correction terms will be much smaller than the quantum temperature /spl planck//spl omega//k.>

IEEE Transactions on Microwave Theory and Techniques•Apr 1, 1994•36 citations

Balloon-Borne Superconducting Integrated Receiver for Atmospheric Research

Oleg S. Kiselev, Manfred Birk, Andrey Ermakov +9 more

A Superconducting Integrated Receiver (SIR) was proposed more than 10 years ago and has since then been developed up to the point of practical applications. We have demonstrated for the first time the capabilities of the SIR technology for heterodyne spectroscopy both in the laboratory and at remote operation under harsh environmental conditions for atmospheric research. Within a SIR the main components needed for a superconducting heterodyne receiver such as an SIS-mixer with quasi-optical antenna, a Flux-Flow oscillator (FFO) as the local oscillator, and a harmonic mixer to phase-lock the FFO are integrated on a single chip. Light weight and low power consumption combined with broadband operation and nearly quantum limited sensitivity make the SIR a perfect candidate for future airborne and space-borne missions. The noise temperature of the SIR was measured to be as low as 85 K, with an intermediate frequency band of 4-8 GHz in double sideband operation; the spectral resolution is well below 1 MHz. The SIR was implemented in the three-channel balloon-borne instrument TELIS (TErahertz and submillimeter LImb Sounder) that detects spectral emission lines of stratospheric trace gases (like ClO and BrO). These gases even in small quantities can have a significant impact on the atmosphere because they speed up certain chemical processes, such as ozone depletion.

IEEE Transactions on Applied Superconductivity•Dec 22, 2010•26 citations

Monolithic high-temperature superconducting heterodyne Josephson frequency down-converter

Jia Du, Ting Zhang, J.C. Macfarlane +2 more

A monolithic microwave integrated circuit (MMIC) frequency down-converter based on a compact high-Tc superconducting (HTS) device is demonstrated. The on-chip integrated HTS down-converter consists of a 7–9 GHz bandpass filter for RF input, a lowpass filter for intermediate frequency output, and a self-pumped Josephson heterodyne mixer. All the above passive and active components are fabricated on a single 10 mm × 20 mm chip of YBa2Cu3O7−x film on MgO substrate. Characterization of this MMIC HTS down-converter in terms of frequency response, conversion gain, frequency-tuneability, bias dependence, dynamic range, linearity, and intrinsic noise are presented in this paper.

Applied Physics Letters•Jun 25, 2012•13 citations

Features of the Spectrum of a Niobium Josephson Junction Array Measured with the Use of High-Tc, Josephson Mixer

Mikhail A. Galin, A. I. El’kina, M. Yu. Levichev +3 more

We performed spectral measurements of a large niobium Josephson junctions array. The array consists of 9996 serially connected Nb/NbSi/Nb junctions placed on a 1×1 cm silicon substrate. The spectrum was analyzed by a heterodyne superconducting receiver based on a high-TcJosephson mixer. It was discovered that the linewidth of Josephson radiation is strongly influenced by configuration and type of a measurement system. We obtain the linewidth down to 0.2 MHz when connecting the array to an autonomous power source and minimizing technical noise. We also observed the shift of the spectral frequency from the Josephson one that can be explained by peculiarities of synchronization of such large multi-oscillator systems.

IEEE All-Russian Microwave Conference (RMC)•Nov 25, 2024•0 citations
Frequency down-conversion of a received signal in an integrated receiver with a superconducting heterodyne oscillator is simulated. The effect of the nonideal heterodyne spectrum on the transformation is assessed. The possibility of elimination of distortions introduced by the heterodyne in the course of the input spectrum reconstruction is investigated. A new method for signal spectrum reconstruction is proposed and studied. The effect of noise at the receiver output on the reconstructed spectrum of the original signal is studied. The requirements for the heterodyne spectral parameters providing for the necessary accuracy of reconstruction are determined.
Superconductor-insulator-superconductor (SIS) junctions, which are low-noise heterodyne mixers, have been used as frequency converters.In recent years, ultralow power consumption of receiver components has become essential to increase the scale and integration of receiver systems.In this paper, we explore the performance of SIS mixers, which have been widely used as a low-noise frequency down-converter in the field of radio astronomy, as a frequency up-converter and discuss the possibility of its application to low-noise microwave amplifiers with ultra-low power consumption.In this study, we investigate the characteristics of the SIS upconverters, clarifying the conditions for gain generation in up-conversion.This research will lead to the realization of ultra-low-power amplifiers based on SIS mixers, which will solve the problem of increasing power consumption in future receiver systems.Chapter 1 describes the background of the research, including the ongoing problem of the increasing scale of receiving systems and the associated power consumption of low-noise amplifiers in the field of high-sensitivity reception, the history of the research on heterodyne mixing using SIS mixers, and the significance and policy of the research.Chapter 2 describes the theoretical background relevant to this study and discusses the basic properties of SIS junctions as heterodyne mixers.In Chapter 3, we describe the numerical analysis conducted to clarify the upconversion characteristics of the SIS mixer.In Chapter 4, we describe the mixing characteristics of SIS junctions at 40 GHz by constructing a new experimental system that directly measures the characteristics of heterodyne mixers. IVIn Chapter 5, a new experimental system is constructed using an existing SIS mixer developed as a down-converter for W-band, and the up-conversion gain characteristics in the 100 GHz band are described.Chapter 6 describes a demonstration experiment that shows the potential of the SIS mixer to be applied to ultra-low-power low-noise microwave amplifiers.Chapter 7 summarizes the paper and discusses the challenges and prospects for future realization and application of ultra-low-power amplifiers.V
This chapter discusses the high sensitivity superconducting mixers, i.e. detectors used in heterodyne receivers. Today, there are essentially two very successful concepts of superconducting mixers, or frequency down-converters, the superconductor-insulator-superconductor tunnel junction SIS mixer and the superconducting hot-electron bolometer mixer. Moving up to higher frequencies in the microwave and millimeter wave electromagnetic spectra makes it more and more difficult to retrieve a good signal-to-noise ratio with ordinary solid-state amplifiers. The driving force for using superconducting mixers is their excellent down-conversion efficiency and capability to down-convert RF signals from microwave frequencies up to the terahertz region. The main purpose of a receiver is to pick up and amplify a weak signal, which can then be accurately determined in amplitude and phase. The mixer noise temperature and conversion gain are the most important parameters for the mixing device. The Josephson junction mixer was one of the first suggested devices based on superconducting point contacts and later tunnel junctions.
A Superconducting Integrated Receiver (SIR) was proposed more than 10 years ago and has since then been developed up to the point of practical applications. We have demonstrated for the first time the capabilities of the SIR technology for heterodyne spectroscopy both in the laboratory and at remote operation under harsh environmental conditions for atmospheric research. Within a SIR the main components needed for a superconducting heterodyne receiver such as an SIS-mixer with quasi-optical antenna, a Flux-Flow oscillator (FFO) as the local oscillator, and a harmonic mixer to phase-lock the FFO are integrated on a single chip. Light weight and low power consumption combined with broadband operation and nearly quantum limited sensitivity make the SIR a perfect candidate for future airborne and space-borne missions. The noise temperature of the SIR was measured to be as low as 85 K, with an intermediate frequency band of 4-8 GHz in double sideband operation; the spectral resolution is well below 1 MHz. The SIR was implemented in the three-channel balloon-borne instrument TELIS (TErahertz and submillimeter LImb Sounder) that detects spectral emission lines of stratospheric trace gases (like ClO and BrO). These gases even in small quantities can have a significant impact on the atmosphere because they speed up certain chemical processes, such as ozone depletion.
A monolithic microwave integrated circuit (MMIC) frequency down-converter based on a compact high-Tc superconducting (HTS) device is demonstrated. The on-chip integrated HTS down-converter consists of a 7–9 GHz bandpass filter for RF input, a lowpass filter for intermediate frequency output, and a self-pumped Josephson heterodyne mixer. All the above passive and active components are fabricated on a single 10 mm × 20 mm chip of YBa2Cu3O7−x film on MgO substrate. Characterization of this MMIC HTS down-converter in terms of frequency response, conversion gain, frequency-tuneability, bias dependence, dynamic range, linearity, and intrinsic noise are presented in this paper.
We performed spectral measurements of a large niobium Josephson junctions array. The array consists of 9996 serially connected Nb/NbSi/Nb junctions placed on a 1×1 cm silicon substrate. The spectrum was analyzed by a heterodyne superconducting receiver based on a high-TcJosephson mixer. It was discovered that the linewidth of Josephson radiation is strongly influenced by configuration and type of a measurement system. We obtain the linewidth down to 0.2 MHz when connecting the array to an autonomous power source and minimizing technical noise. We also observed the shift of the spectral frequency from the Josephson one that can be explained by peculiarities of synchronization of such large multi-oscillator systems.