Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Optics Express

Stabilization of a long-armed fiber-optic single-photon interferometer

Seok-Beom Cho, Tae-Gon Noh

Published Oct 7, 2009• 54 citations
Publisher

Abstract

We report on single-photon interference experiments in a Michelson-type interferometer built with two 6-km-long fiber spools, as well as on the active stabilization of the interferometer. A weak coherent light signal was (de-) multiplexed with a strong reference light using wavelength-division multiplexing technique, and real-time feedback control technique was applied for the reference light to actively stabilize the phase fluctuation in the long-armed fiber interferometer. The stabilized interferometer showed phase stability of 0.06 rad, which corresponds to an optical path length fluctuation of 15 nm between the 6-km-long interfering arms. The raw visibility obtained without subtracting noise counts in the single-photon interference experiment was more than 98% for stabilized conditions.

DOI
10.1364/oe.17.019027

Related papers

Active stabilization of a fiber-optic two-photon interferometer using continuous optical length control

Seok-Beom Cho, Heonoh Kim

The practical realization of long-distance entanglement-based quantum communication systems strongly rely on the observation of highly stable quantum interference between correlated single photons. This task must accompany active stabilization of the optical path lengths within the single-photon coherence length. Here, we provide two-step interferometer stabilization methods employing continuous optical length control and experimentally demonstrate two-photon quantum interference using an actively stabilized 6-km-long fiber-optic Hong-Ou-Mandel interferometer. The two-step active control techniques are applied for measuring highly stable two-photon interference fringes by scanning the optical path-length difference. The obtained two-photon interference visibilities with and without accidental subtraction are found to be approximately 90.7% and 65.4%, respectively.

Optics Express•May 11, 2016•13 citations

非平衡光纤干涉仪的相位稳定方法研究

Chuanrong Yang, Chenzhi Yuan, Yunru Fan +7 more

By using photons to carry quantum information, optical quantum information technology plays an essential role in quantum communication, quantum metrology, and linear optical quantum computing. In recent years, the unbalanced fiber interferometer has been widely applied in preparing, manipulating, and measuring photon qubits. However, the unbalanced fiber interferometer based on fiber devices is sensitive to the environment's thermal, mechanical, and acoustic noise. Thus, phase stabilization based on feedback control is essential in utilizing an unbalanced fiber interferometer. The existing phase stabilization methods typically employ a reference laser combined with optoelectronic detection, thus introducing additional noise to photon qubits. In this paper, we propose and demonstrate a feedback control method to stabilize a phase in an unbalanced fiber interferometer by combining weak coherent reference light and single photon counting. Using theoretical analysis, we realized the phase stabilization of an unbalanced fiber Michelson interferometer with an arm-length difference of about 1 m. The results showed that the jitter of the stabilized phase is less than 0.042 rad, while the visibility of single-photon interference fringes is higher than 99%.

Scientia Sinica Informationis•Feb 1, 2022•0 citations

Stable single-photon interference in a 1 km fiber-optic Mach–Zehnder interferometer with continuous phase adjustment

GUILHERME BARRETO XAVIER, Jean Pierre von der Weid

We experimentally demonstrate stable and user-adjustable single-photon interference in a 1 km long fiber-optic Mach-Zehnder interferometer, using an active phase control system with the feedback provided by a classical laser. We are able to continuously tune the single-photon phase difference between the interferometer arms using a phase modulator, which is synchronized with the gate window of the single-photon detectors. The phase control system employs a piezoelectric fiber stretcher to stabilize the phase drift in the interferometer. A single-photon net visibility of 0.97 is obtained, yielding future possibilities for experimental realizations of quantum repeaters in optical fibers and violation of Bell's inequalities using genuine energy-time entanglement.

arXiv:1104.2866•Optics Letters•May 4, 2011•62 citations

Phase stabilization with triple wavelength bands for single-photon interference in quantum communication

Yohei Sugiyama, Akito Ozawa, Wataru Kokuyama +3 more

Optical interferometers are crucial for long-distance quantum communications. We propose a novel phase stabilization method employing triple wavelength bands for single-photon interference in optical fiber-based interferometers, incorporating a simplified laser frequency stabilization technique that utilizes a single nonlinear crystal. After stabilization, the residual phase noise of the fiber interferometer was 20 mrad for differential arm lengths (Δ L ) of 0 and 10 m. This represents a 9-fold and 7.5-fold improvement for Δ L = 0 and 10 m, respectively, compared with those observed in previous double-wavelength methods. These findings enhance the visibility and simplicity of quantum key and entanglement distributions in long-distance quantum communication.

Optics Express•Dec 15, 2025•1 citation

Phase-noise measurements in long-fiber interferometers for quantum-repeater applications

Jiří Minář, Hugues de Riedmatten, Christoph Simon +2 more

Many protocols for long distance quantum communication require interferometric phase stability over long distances of optical fibers. In this paper we investigate the phase noise in long optical fibers both in laboratory environment and in installed commercial fibers in an urban environment over short time scales (up to hundreds of $\ensuremath{\mu}\text{s}$). We show that the phase fluctuations during the travel time of optical pulses in long-fiber loops are small enough to obtain high visibility first-order interference fringes in a Sagnac interferometer configuration for fiber lengths up to 75 km. We also measure phase fluctuations in a Mach-Zehnder interferometer in installed fibers with arm length 36.5 km. We verify that the phase noise respects Gaussian distribution and measure the mean phase change as a function of time difference. The typical time needed for a mean phase change of 0.1 rad is of order of $100\text{ }\ensuremath{\mu}\text{s}$, which provides information about the time scale available for active phase stabilization. Our results are relevant for future implementations of quantum repeaters in installed optical fiber networks.

arXiv:0712.0740•Physical Review A•May 20, 2008•111 citations

Single-photon interference and router-control in an optic fiber Sagnac interferometer

Guang Wu, Chunyuan Zhou, Zeng He-Ping +1 more

A novel scheme to realize stable single-photon interference and router-control is demonstrated in this paper. Phase difference between clockwise and counter-clockwise single-photons is controlled by time-division phase modulation in an optic fiber Sagnac loop. Due to the annular geometric configuration of the Sagnac loop, clockwise and counter-clockwise single-photons travel the same optical path and have the same slowly-varying phase drifts, which are automatically compensated. Furthermore, clockwise and counter-clockwise single-photons encounter the same polarization mode dispersion, which is also automatically compensated at the exit port of the Sagnac interferometer. Long-distance single-mode optic fiber at 1550 nm is used in our experimental realization. Fringe visibility of single-photon interference higher than 98% and fidelity of single-photon router-control higher than 90% have been obtained in a Sagnac fiber loop of 5 km. We also realized a stable single-photon interference in Sagnac fiber loops as long as 27 and 52 km. The corresponding fringe visibilities were higher than 94% and 84%, respectively.

Acta Physica Sinica•Jan 1, 2004•1 citation
We report on single-photon interference experiments in a Michelson-type interferometer built with two 6-km-long fiber spools, as well as on the active stabilization of the interferometer. A weak coherent light signal was (de-) multiplexed with a strong reference light using wavelength-division multiplexing technique, and real-time feedback control technique was applied for the reference light to actively stabilize the phase fluctuation in the long-armed fiber interferometer. The stabilized interferometer showed phase stability of 0.06 rad, which corresponds to an optical path length fluctuation of 15 nm between the 6-km-long interfering arms. The raw visibility obtained without subtracting noise counts in the single-photon interference experiment was more than 98% for stabilized conditions.
The practical realization of long-distance entanglement-based quantum communication systems strongly rely on the observation of highly stable quantum interference between correlated single photons. This task must accompany active stabilization of the optical path lengths within the single-photon coherence length. Here, we provide two-step interferometer stabilization methods employing continuous optical length control and experimentally demonstrate two-photon quantum interference using an actively stabilized 6-km-long fiber-optic Hong-Ou-Mandel interferometer. The two-step active control techniques are applied for measuring highly stable two-photon interference fringes by scanning the optical path-length difference. The obtained two-photon interference visibilities with and without accidental subtraction are found to be approximately 90.7% and 65.4%, respectively.
By using photons to carry quantum information, optical quantum information technology plays an essential role in quantum communication, quantum metrology, and linear optical quantum computing. In recent years, the unbalanced fiber interferometer has been widely applied in preparing, manipulating, and measuring photon qubits. However, the unbalanced fiber interferometer based on fiber devices is sensitive to the environment's thermal, mechanical, and acoustic noise. Thus, phase stabilization based on feedback control is essential in utilizing an unbalanced fiber interferometer. The existing phase stabilization methods typically employ a reference laser combined with optoelectronic detection, thus introducing additional noise to photon qubits. In this paper, we propose and demonstrate a feedback control method to stabilize a phase in an unbalanced fiber interferometer by combining weak coherent reference light and single photon counting. Using theoretical analysis, we realized the phase stabilization of an unbalanced fiber Michelson interferometer with an arm-length difference of about 1 m. The results showed that the jitter of the stabilized phase is less than 0.042 rad, while the visibility of single-photon interference fringes is higher than 99%.
We experimentally demonstrate stable and user-adjustable single-photon interference in a 1 km long fiber-optic Mach-Zehnder interferometer, using an active phase control system with the feedback provided by a classical laser. We are able to continuously tune the single-photon phase difference between the interferometer arms using a phase modulator, which is synchronized with the gate window of the single-photon detectors. The phase control system employs a piezoelectric fiber stretcher to stabilize the phase drift in the interferometer. A single-photon net visibility of 0.97 is obtained, yielding future possibilities for experimental realizations of quantum repeaters in optical fibers and violation of Bell's inequalities using genuine energy-time entanglement.
Optical interferometers are crucial for long-distance quantum communications. We propose a novel phase stabilization method employing triple wavelength bands for single-photon interference in optical fiber-based interferometers, incorporating a simplified laser frequency stabilization technique that utilizes a single nonlinear crystal. After stabilization, the residual phase noise of the fiber interferometer was 20 mrad for differential arm lengths (Δ L ) of 0 and 10 m. This represents a 9-fold and 7.5-fold improvement for Δ L = 0 and 10 m, respectively, compared with those observed in previous double-wavelength methods. These findings enhance the visibility and simplicity of quantum key and entanglement distributions in long-distance quantum communication.
Many protocols for long distance quantum communication require interferometric phase stability over long distances of optical fibers. In this paper we investigate the phase noise in long optical fibers both in laboratory environment and in installed commercial fibers in an urban environment over short time scales (up to hundreds of $\ensuremath{\mu}\text{s}$). We show that the phase fluctuations during the travel time of optical pulses in long-fiber loops are small enough to obtain high visibility first-order interference fringes in a Sagnac interferometer configuration for fiber lengths up to 75 km. We also measure phase fluctuations in a Mach-Zehnder interferometer in installed fibers with arm length 36.5 km. We verify that the phase noise respects Gaussian distribution and measure the mean phase change as a function of time difference. The typical time needed for a mean phase change of 0.1 rad is of order of $100\text{ }\ensuremath{\mu}\text{s}$, which provides information about the time scale available for active phase stabilization. Our results are relevant for future implementations of quantum repeaters in installed optical fiber networks.
A novel scheme to realize stable single-photon interference and router-control is demonstrated in this paper. Phase difference between clockwise and counter-clockwise single-photons is controlled by time-division phase modulation in an optic fiber Sagnac loop. Due to the annular geometric configuration of the Sagnac loop, clockwise and counter-clockwise single-photons travel the same optical path and have the same slowly-varying phase drifts, which are automatically compensated. Furthermore, clockwise and counter-clockwise single-photons encounter the same polarization mode dispersion, which is also automatically compensated at the exit port of the Sagnac interferometer. Long-distance single-mode optic fiber at 1550 nm is used in our experimental realization. Fringe visibility of single-photon interference higher than 98% and fidelity of single-photon router-control higher than 90% have been obtained in a Sagnac fiber loop of 5 km. We also realized a stable single-photon interference in Sagnac fiber loops as long as 27 and 52 km. The corresponding fringe visibilities were higher than 94% and 84%, respectively.