Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America B

Can single-photon processes provide useful materials for frequency-domain optical storage?

W. E. Moerner, M. D. Levenson

Published Jun 1, 1985• 61 citations
Publisher

Abstract

To determine the complete set of required materials properties for a viable frequency-domain optical-storage system based on persistent spectral hole burning, we have performed analytic and computer simulations of the writing performance, signal-to-noise ratio, and number of reads that can be obtained from single-photon or monophotonic (no threshold) hole-burning mechanisms with realistic spot sizes and reading and writing times. We find that acceptable reading performance occurs only for materials with high quantum efficiencies, low absorption cross sections, and high solubilities. This work for the first time clearly defines the parameter space of single-photon materials that can be utilized in a frequency-domain optical-storage system.

DOI
10.1364/josab.2.000915

Related papers

Persistant Spectral Hole-Burning: Photon-Gating and Fundamental Statistical Limits

W. E. Moerner

Abstract : Fundamental limits on frequency-domain optical storage using persistent spectral hole-burning follow from both the expected configuration of the storage system and from physical effects such as the photophysics of the light-induced reaction in the material, photon quantum (shot) noise, and statistical fluctuations in additive random quantities. When frequency-domain reading and writing in focused spots is considered, the large class of single-photon materials can be shown to have serious limitations from a single-to-noise point of view. This has stimulated interest in photon-grated material which effectively have a threshold in the writing process, controlled by a second light beam of a different color. Fundamental statistical limits on persistent spectral hole-burning can also be illustrated using recent measurements of statistical fine structure in solids. Other recent experiments in which the absorption spectrum of a single absorbing molecule in a solid was measured represent an extreme limit on persistent spectral hole-burning effects.

STIN•Nov 3, 1989•0 citations

TWO-COLOR, PHOTON-GATED SPECTRAL HOLE-BURNING

W. E. Moerner, Manfred Gehrtz, Howard W. H. Lee +4 more

Persistent spectral hole-burning (PHB) has been proposed as the essential element of a frequency domain optical storage system1 in which the frequency at which a hole is burned in an inhomogeneously broadened absorption line at low temperatures serves as an additional dimension for the storage of digital information. Essentially all of the mechanisms studied until recently have been single-photon mechanisms, i.e., the photoionduced change leading to hole-burning (writing) for a given center occurs with a certain fixed probability after the absorption of one photon. Such linear, monophotonic processes suffer from the drawback that the act of detecting holes (reading) can also produce changes in the absorption line. Recent modeling studies of the generalized single-photon process2 have shown that thousands to tens of thousands of reads can be obtained from single-photon mechanisms only when the material possesses high quantum efficiency and low absorption cross section. These restrictive requirements do not apply for photon-gated hole-burning mechanisms, i.e., those mechanisms for which hole-burning occurs only in the presence of an additional “gating” light source, because for these mechanisms, reading is performed in the absence of the gating light and is therefore nondestructive.

Conference on Lasers and Electro-Optics•Jan 1, 1985•0 citations

Material Considerations for Time-Domain Optical Storage

Stefan Kröll, Per Tidlund

Optical frequency-domain data storage using persistent spectral hole burning has been considered for more than ten years by now and the material parameter space required has been investigated and discussed [1,2]. An alternative approach to spectral storage, by utilizing the time-domain has been proposed by Mossberg [3]. This approach using coherent transient techniques (photon echoes) has gained increasing attention during the last years. However, to our knowledge an analysis of the required material parameter space for this approach still has not been published. In this conference paper some preliminary material considerations pertaining to time-domain storage and processing in inorganic crystals are presented.

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1992•0 citations

Optical Hole Burning of Materials for Frequency Domain Optical Storage and Processing

A.A. Gorokhovsky

Over the report period, an optical laboratory for characterization materials for frequency domain optical storage was upgraded. Spectral and spectral hole burning properties were studied for several free-based and metallo-naphthalocyanine derivatives in polymer hosts. These materials exhibit a strong 0-0 absorption band and persistent hole burning in the region 800 nm. Hole burning parameters were determined for eight materials; in particular, the hole burning kinetics was analyzed and the quantum efficiencies were determined to be between 0.1% and 1%. Holograms (data pages) in the transmission geometry were successfully recorded in the materials studied using single frequency laser diodes. A photoluminescence of five natural diamonds (type Ia) implanted with Xe ions with dose range 1x10(exp 13) - 5x10(exp 14) /sq cm was investigated as a function of thermal annealing at temperatures between 300 and 1400 C.

•Mar 25, 2002•0 citations

Molecular electronics for frequency domain optical storage: Persistent spectral hole-burning - A review

W. E. Moerner

Persistent spectral hole-burning (PHB) is a phenomenon that allows an additional dimension, the frequency at which spectral holes are written, to be used to encode digital data. PHB can be used to store a large number of bits of information in the volume irradiated by a focused laser beam, leading to a possible future storage technology, frequency domain optical storage. A large number of photochemical and photophysical mechanisms have led to the production of spectral holes; a wealth of information has been learned about host-guest interactions, dephasing, and solid-state photochemistry at low temperatures. The general structure of a frequency domain optical store places a set of constraints on the engineering of such a system as well as on the materials used as recording media. The dynamics of the hole-burning process are crucial; for monophotonic mechanisms in particular, a set of stringent constraints can be derived that limit the applicability of this class of materials. Recent discoveries of two-color, photon-gated hole-burning offer special promise for nondestructive reading and improved performance.

•Mar 25, 1985•10 citations

Multiple Photon-Gated Persistent Spectral Holes Burnt over A Whole Absorption Band in A New System of Frequency-Domain Optical Storage Material

You-yuan Zhao, Yong‐Le Pan, Yu Yin +5 more

Persistent spectral hole burning(PSHB) permits use of the frequency domain for achieving ultrahigh-density optical information storage in which the presence of a spectral hole at a particular laser frequency utilized to encode much many bits within a single focused laser spot. The ultimate storage density of the three-dimensional(x,y,f) optical memories can be increased to 109-1011 bits/cm2[1].

Spectral Hole-Burning and Related Spectroscopies: Science and Applications•Jan 1, 1994•0 citations
To determine the complete set of required materials properties for a viable frequency-domain optical-storage system based on persistent spectral hole burning, we have performed analytic and computer simulations of the writing performance, signal-to-noise ratio, and number of reads that can be obtained from single-photon or monophotonic (no threshold) hole-burning mechanisms with realistic spot sizes and reading and writing times. We find that acceptable reading performance occurs only for materials with high quantum efficiencies, low absorption cross sections, and high solubilities. This work for the first time clearly defines the parameter space of single-photon materials that can be utilized in a frequency-domain optical-storage system.
Abstract : Fundamental limits on frequency-domain optical storage using persistent spectral hole-burning follow from both the expected configuration of the storage system and from physical effects such as the photophysics of the light-induced reaction in the material, photon quantum (shot) noise, and statistical fluctuations in additive random quantities. When frequency-domain reading and writing in focused spots is considered, the large class of single-photon materials can be shown to have serious limitations from a single-to-noise point of view. This has stimulated interest in photon-grated material which effectively have a threshold in the writing process, controlled by a second light beam of a different color. Fundamental statistical limits on persistent spectral hole-burning can also be illustrated using recent measurements of statistical fine structure in solids. Other recent experiments in which the absorption spectrum of a single absorbing molecule in a solid was measured represent an extreme limit on persistent spectral hole-burning effects.
Persistent spectral hole-burning (PHB) has been proposed as the essential element of a frequency domain optical storage system1 in which the frequency at which a hole is burned in an inhomogeneously broadened absorption line at low temperatures serves as an additional dimension for the storage of digital information. Essentially all of the mechanisms studied until recently have been single-photon mechanisms, i.e., the photoionduced change leading to hole-burning (writing) for a given center occurs with a certain fixed probability after the absorption of one photon. Such linear, monophotonic processes suffer from the drawback that the act of detecting holes (reading) can also produce changes in the absorption line. Recent modeling studies of the generalized single-photon process2 have shown that thousands to tens of thousands of reads can be obtained from single-photon mechanisms only when the material possesses high quantum efficiency and low absorption cross section. These restrictive requirements do not apply for photon-gated hole-burning mechanisms, i.e., those mechanisms for which hole-burning occurs only in the presence of an additional “gating” light source, because for these mechanisms, reading is performed in the absence of the gating light and is therefore nondestructive.
Optical frequency-domain data storage using persistent spectral hole burning has been considered for more than ten years by now and the material parameter space required has been investigated and discussed [1,2]. An alternative approach to spectral storage, by utilizing the time-domain has been proposed by Mossberg [3]. This approach using coherent transient techniques (photon echoes) has gained increasing attention during the last years. However, to our knowledge an analysis of the required material parameter space for this approach still has not been published. In this conference paper some preliminary material considerations pertaining to time-domain storage and processing in inorganic crystals are presented.
Over the report period, an optical laboratory for characterization materials for frequency domain optical storage was upgraded. Spectral and spectral hole burning properties were studied for several free-based and metallo-naphthalocyanine derivatives in polymer hosts. These materials exhibit a strong 0-0 absorption band and persistent hole burning in the region 800 nm. Hole burning parameters were determined for eight materials; in particular, the hole burning kinetics was analyzed and the quantum efficiencies were determined to be between 0.1% and 1%. Holograms (data pages) in the transmission geometry were successfully recorded in the materials studied using single frequency laser diodes. A photoluminescence of five natural diamonds (type Ia) implanted with Xe ions with dose range 1x10(exp 13) - 5x10(exp 14) /sq cm was investigated as a function of thermal annealing at temperatures between 300 and 1400 C.
Persistent spectral hole-burning (PHB) is a phenomenon that allows an additional dimension, the frequency at which spectral holes are written, to be used to encode digital data. PHB can be used to store a large number of bits of information in the volume irradiated by a focused laser beam, leading to a possible future storage technology, frequency domain optical storage. A large number of photochemical and photophysical mechanisms have led to the production of spectral holes; a wealth of information has been learned about host-guest interactions, dephasing, and solid-state photochemistry at low temperatures. The general structure of a frequency domain optical store places a set of constraints on the engineering of such a system as well as on the materials used as recording media. The dynamics of the hole-burning process are crucial; for monophotonic mechanisms in particular, a set of stringent constraints can be derived that limit the applicability of this class of materials. Recent discoveries of two-color, photon-gated hole-burning offer special promise for nondestructive reading and improved performance.