The requirements for higher data rates in optical systems lead to the use of more efficient modulation formats. A proposal for the tunable storage of these signals based on the quasi-light storage is presented.
The requirements for higher data rates in optical communication systems lead to the use of more efficient modulation formats. In the networks the all optical synchronization and storage of these signals is still a major challenge in order to enable higher transmittable data rates and reduce the energy consumption. In this contribution we show for the first time, to the best of our knowledge, the tunable storage of phase modulated optical data packets with up to 60 pulse widths. This opens the way to the optical storage of data packets modulated with highly efficient modulation formats.
We investigate and discuss the possibilities and limits of a method for the tunable storage of optical packets called Quasi-Light Storage (QLS). The QLS is simply based on a sampling in the frequency domain. Hence, it is independent of the data rate, the modulation and the wavelength of the optical packets. It works at room temperatures in standard fibers with off-the-shelf telecom equipment. As we will show in theory, the method has the potential to store packets with several thousand Bits of data from Zero to up to 100 ns. In the experiments we have stored several 8 Bit packets with a data rate of 1 Gbps for up to 100 ns, which corresponds to a delay-bandwidth product of 100 Bit.
In this paper, we compare two methods to delay optical signals based on quasi-light storage (QLS). These methods are very simple and offer high-tunable storage times up to several thousand bits. Furthermore, they are transparent to the bit rate and modulation format of the signal. We explore the potentials and limitations of both methods. Fiber-based QLS is useful when high absolute delay is required and no loss or very small amount of attenuation can be tolerated. Frequency-to-time-conversion-based QLS can be used for the delay of very high bandwidth signals.
Today's telecommunication is based on optical packets which transmit the information in optical fiber networks around the world. Currently, the processing of the signals is done in the electrical domain. Direct storage in the optical domain would avoid the transfer of the packets to the electrical and back to the optical domain in every network node and, therefore, increase the speed and possibly reduce the energy consumption of telecommunications. However, light consists of photons which propagate with the speed of light in vacuum. Thus, the storage of light is a big challenge. There exist some methods to slow down the speed of the light, or to store it in excitations of a medium. However, these methods cannot be used for the storage of optical data packets used in telecommunications networks. Here we show how the time-frequency-coherence, which holds for every signal and therefore for optical packets as well, can be exploited to build an optical memory. We will review the background and show in detail and through examples, how a frequency comb can be used for the copying of an optical packet which enters the memory. One of these time domain copies is then extracted from the memory by a time domain switch. We will show this method for intensity as well as for phase modulated signals.