Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Performance Improvements of a Microwave Oscillator Using High Temperature Superconducting Harmonic Mixer

Weiwei Xu, Y.F. Zhang, X.K. Jiang, K.. Ling, J.. Chen, Peiheng Wu

Published Jun 1, 2007• 3 citations
Publisher

Abstract

Based on YBa2Cu3O7Josephson junction mounted on a pulse tube cryocooler, a compact superconducting harmonic mixer is used to phase-lock a microwave source at 3 mm waveband to a reference of high precision at much lower frequency, thus greatly improving the performances of the former. Currently the highest harmonic number at which phase locking can be realized is 60. The experimental system, main results, and the problem of how to increase the harmonic number are discussed in details.

DOI
10.1109/tasc.2007.898610

Related papers

Harmonic mixing at mm waveband in a high temperature superconducting grain boundary Josephson junction

Huabing Wang, Weiwei Xu, Qilin Cheng +4 more

Using a high Tc superconducting grain boundary Josephson junction, harmonic mixing experiments in the mm waveband were carried out, aiming at as large a harmonic number and as high a signal frequency as possible. The dependencies of intermediate frequency output on dc bias, harmonic number, frequency of local oscillator (LO), and other parameters were carefully studied. Until now, our best result was the mixing between the signal at 95 GHz and the 105th harmonic of LO at about 900 MHz. Preliminary experiments using a high Tc harmonic mixer and phase-locking loop were tried to stabilize the frequency of a mm wave source.

Journal of Applied Physics•Feb 15, 1994•16 citations

Experimental Study of Harmonic Mixer Using two HTS YBCO Grain Boundary Josephson Junctions in Series

Mei Yu, H. F. Geng, Tao Hua +6 more

Two high-Tc superconducting (HTS) YBa2Cu3O7-δ(YBCO) grain boundary (GB) Josephson junctions in series as a harmonic mixer is investigated. The research shows that the mixer consisting of two series YBCO Josephson junctions has a larger harmonic number than that with only one junction in heterodyne mixing at zero-voltage bias. One of the advantages of the series-Josephson-junction mixer is that the total critical current is improved without sacrificing the sensitivity of the junctions in the array that makes the mixer easier to get more microwave induced-steps required by larger harmonic number. Furthermore, the underdamped YBCO GB series-Josephson-junction mixer operated at zero-bias voltage, where the zero-order Shapiro step exists, achieves mutual phase locking of the junctions in the array, resulting in an excellent mixing performance. Thus, the series-underdamp-Josephson-junction mixer with zero bias is predominant and compact in terahertz (THz) application due to its excellent performance and no dc bias supply.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Sep 1, 2019•0 citations

RESEARCH ON CONVERSION EFFICIENCY CHARACTERISTIC OF HTS JOSEPHSON JUNCTION HARMONIC MIXERS

Wu Pei-Heng

Mixers with HTS YBCO/MgO,YBCO/YSZ bicrystal Josephson junction are researched on.Harmonic mixing at sub-mm wave band has been studied on two different HTS mixing systems:one is mounted on pulse tube cryocooler,the other is G-M cryocooler.We measured and analyzed the characteristic of Conversion Efficiency and its relationships with coupling coefficient,LO power,bias current,harmonic number and so on.

Diwen wuli xuebao•Jan 1, 2008•0 citations

Harmonic Mixing at 90 GHz Using High-T_c Superconductor Josephson Junction

王华兵, 程其恒, 许伟伟 +3 more

1 Introduction Compared with its semiconductor counterpart, Josephson junction (J. J.) usually has larger nonlinearity, lower noise temperature, wider operating waveband and less microwave loss, thus making itself a good candidate for applications at submillimeter and far-infrared wavebands. Some harmonic mixing experiments were done previously using N_b point-contact junctions, with the highest signal frequency being about 4.25 THz and the largest harmonic number being 851. However, because of the requirement of liquid

Chinese Science Bulletin•Sep 15, 1993•2 citations

High-Tc harmonic mixer applied to Josephson junction array voltage standard at NIM

S.Q. Xue, H.H. Li, X.C. Shen +4 more

A high-Tc superconducting (YBCO) Josephson-junction harmonic mixer has been used to improve the spectrum purity of the microwave source in the JJAVS at the National Institute of Metrology (NIM). Compared with the microwave source using source-locking counter EIP 578B, the spectrum purity of the microwave source has been improved significantly from -25 dBc/Hz (offset /spl plusmn/50 kHz) to -58 dBc/Hz (offset /spl plusmn/10 kHz). Therefore, the random uncertainty of the JJAVS was reduced.

IEEE Transactions on Instrumentation and Measurement•Apr 1, 1997•0 citations

Monolithic high-temperature superconducting (HTS) K-band sub-harmonic mixer based on reverse-biased Josephson junctions

He Zhu, Ting Zhang, Jia Du

Abstract This paper presents a monolithic high-temperature superconducting K-band sub-harmonic Josephson mixer using a pair of reverse-biased Josephson junctions (JJs), which are biased using reversed DC current. The sub-harmonic mixer can provide higher conversion gain and stronger rejection of the even-order harmonics of the local oscillator signal. A matching circuit with several bandpass filters (BPFs) is designed to match the junctions and achieve a maximum conversion gain. Based on the circuit configuration and using the established Verilog-A JJ mixer model, transient simulation has been done in the circuit simulator. An electromagnetic (EM) model is built and simulated in a full-wave simulation environment, and the results reveal that the design realizes very low loss at 25 GHz, excellent port isolation and high conversion efficiency. A prototype has been fabricated and tested in a cryocooler at operating temperatures of 40 K and 20 K. Measurements have experimentally verified the novel radio frequency design and simulation results. Maximum conversion gains of −10.5 dB and −6.5 dB were obtained at 40 K and 20 K, respectively, with a bandwidth greater than 400 MHz and outstanding gain linearity. It is also predicted that the mixer performance can be further improved with higher critical current I c values and identical or similar I c values between two parallel junctions.

Superconductor Science and Technology•Jan 13, 2026•1 citation
Based on YBa2Cu3O7Josephson junction mounted on a pulse tube cryocooler, a compact superconducting harmonic mixer is used to phase-lock a microwave source at 3 mm waveband to a reference of high precision at much lower frequency, thus greatly improving the performances of the former. Currently the highest harmonic number at which phase locking can be realized is 60. The experimental system, main results, and the problem of how to increase the harmonic number are discussed in details.
Using a high Tc superconducting grain boundary Josephson junction, harmonic mixing experiments in the mm waveband were carried out, aiming at as large a harmonic number and as high a signal frequency as possible. The dependencies of intermediate frequency output on dc bias, harmonic number, frequency of local oscillator (LO), and other parameters were carefully studied. Until now, our best result was the mixing between the signal at 95 GHz and the 105th harmonic of LO at about 900 MHz. Preliminary experiments using a high Tc harmonic mixer and phase-locking loop were tried to stabilize the frequency of a mm wave source.
Two high-Tc superconducting (HTS) YBa2Cu3O7-δ(YBCO) grain boundary (GB) Josephson junctions in series as a harmonic mixer is investigated. The research shows that the mixer consisting of two series YBCO Josephson junctions has a larger harmonic number than that with only one junction in heterodyne mixing at zero-voltage bias. One of the advantages of the series-Josephson-junction mixer is that the total critical current is improved without sacrificing the sensitivity of the junctions in the array that makes the mixer easier to get more microwave induced-steps required by larger harmonic number. Furthermore, the underdamped YBCO GB series-Josephson-junction mixer operated at zero-bias voltage, where the zero-order Shapiro step exists, achieves mutual phase locking of the junctions in the array, resulting in an excellent mixing performance. Thus, the series-underdamp-Josephson-junction mixer with zero bias is predominant and compact in terahertz (THz) application due to its excellent performance and no dc bias supply.
1 Introduction Compared with its semiconductor counterpart, Josephson junction (J. J.) usually has larger nonlinearity, lower noise temperature, wider operating waveband and less microwave loss, thus making itself a good candidate for applications at submillimeter and far-infrared wavebands. Some harmonic mixing experiments were done previously using N_b point-contact junctions, with the highest signal frequency being about 4.25 THz and the largest harmonic number being 851. However, because of the requirement of liquid
Abstract This paper presents a monolithic high-temperature superconducting K-band sub-harmonic Josephson mixer using a pair of reverse-biased Josephson junctions (JJs), which are biased using reversed DC current. The sub-harmonic mixer can provide higher conversion gain and stronger rejection of the even-order harmonics of the local oscillator signal. A matching circuit with several bandpass filters (BPFs) is designed to match the junctions and achieve a maximum conversion gain. Based on the circuit configuration and using the established Verilog-A JJ mixer model, transient simulation has been done in the circuit simulator. An electromagnetic (EM) model is built and simulated in a full-wave simulation environment, and the results reveal that the design realizes very low loss at 25 GHz, excellent port isolation and high conversion efficiency. A prototype has been fabricated and tested in a cryocooler at operating temperatures of 40 K and 20 K. Measurements have experimentally verified the novel radio frequency design and simulation results. Maximum conversion gains of −10.5 dB and −6.5 dB were obtained at 40 K and 20 K, respectively, with a bandwidth greater than 400 MHz and outstanding gain linearity. It is also predicted that the mixer performance can be further improved with higher critical current I c values and identical or similar I c values between two parallel junctions.