Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Information Theory

Complementary reliability-based decodings of binary linear block codes

M.P.C. Fossorier, Shu Lin

Published Jan 1, 1997• 27 citations
Publisher

Abstract

This correspondence presents a hybrid reliability-based decoding algorithm which combines the reprocessing method based on the most reliable basis and a generalized Chase-type algebraic decoder based on the least reliable positions. It is shown that reprocessing with a simple additional algebraic decoding effort achieves significant coding gain. For long codes, the order of reprocessing required to achieve asymptotic optimum error performance is reduced by approximately 1/3. This significantly reduces the computational complexity, especially for long codes. Also, a more efficient criterion for stopping the decoding process is derived based on the knowledge of the algebraic decoding solution.

DOI
10.1109/18.623172

Related papers

Reliability-based syndrome decoding of linear block codes

M.P.C. Fossorier, Shu Lin, Jakov Snyders

In this correspondence, various aspects of reliability-based syndrome decoding of binary codes are investigated. First, it is shown that the least reliable basis (LRB) and the most reliable basis (MRB) are dual of each other. By exploiting this duality, an algorithm performing maximum-likelihood (ML) soft-decision syndrome decoding based on the LRB is presented. Contrarily to previous LRB-based ML syndrome decoding algorithms, this algorithm is more conveniently implementable for codes whose codimension is not small. New sufficient conditions for optimality are derived. These conditions exploit both the ordering associated with the LRB and the structure of the code considered. With respect to MRR-based sufficient conditions, they present the advantage of requiring no soft information and thus can be preprocessed and stored. Based on these conditions, low-complexity soft-decision syndrome decoding algorithms for particular classes of codes are proposed. Finally, a simple algorithm is analyzed. After the construction of the LRB, this algorithm computes the syndrome of smallest Hamming weight among o(K/sup i/) candidates, where K is the dimension of the code, for an order i of reprocessing. At practical bit-error rates, for codes of length N/spl les/128, this algorithm always outperforms any algebraic decoding algorithm capable of correcting up to t+1 errors with an order of reprocessing of at most 2, where t is the error-correcting capability of the code considered.

IEEE Transactions on Information Theory•Jan 1, 1998•31 citations

Decoding of linear block codes based on ordered statistics

M.P.C. Fossorier

This dissertation presents a novel approach to soft decision decoding for binary linear block codes. The basic idea of this approach is to achieve a desired error performance progressively in a number of stages. For each decoding stage, the error performance is highly bounded and the decoding is terminated at the stage where either near-optimum error performance or a desired level of error performance is achieved. As a result, more flexibility in the trade-off between performance and decoding complexity is provided. The proposed decoding is based on the reordering of the received symbols according to their reliability measure. In the dissertation, we evaluate the statistics of the noise after ordering. Based on these statistics, we derive two monotonic properties which dictate the reprocessing strategy. Each codeword is decoded in two steps: (1) hard-decision decoding based on reliability information and (2) reprocessing of the hard-decision decoded codeword in successive stages until the desired performance is achieved. The reprocessing is based on the monotonic properties of the ordering and is carried out using a cost function. A new resource test highly related to the reprocessing strategy is introduced to reduce the number of computations for each reprocessing stage. For short codes of lengths N ≤ 32 or medium codes with 32 < N ≤ 64 with rate R ≥ 0.6, near-optimum bit error performance is achieved in two stages of reprocessing with at most a computation complexity of o(K2) constructed code-words, where K is the dimension of the code. For longer codes, three or more reprocessing stages are required to achieve near-optimum decoding. However, most of the coding gain is obtained within the first two reprocessing stages for error performances of practical interest. The proposed decoding algorithm applies to any binary linear code, does not require any data storage and is well suitable for parallel processing. Furthermore, the maximum number of computations required at each reprocessing stage is fixed, which prevents buffer overflow at low SNR. Further reductions of the number of computations based on probabilistic or decomposable properties of the code considered are also investigated. The generalization of the algorithm to other channels is discussed. Finally, the discrete time channel associated with the AWGN model after ordering is greatly simplified. This simplification allows an important reduction of the number of computations required to evaluate the theoretical error performance of any algorithm based on a partial or total ordering.

•Jan 1, 1994•0 citations

Soft-Decision Decoding Using Ordered Recodings on the Most Reliable Basis

Yingquan Wu, Christoforos N. Hadjicostis

This correspondence investigates soft-decision decoding of binary linear block codes using ordered recodings of test error patterns on the so-called "most reliable basis." The analysis demonstrates the optimality of the most reliable basis by showing that, among all possible bases, the most reliable basis minimizes the list error probability for a very general (and well-defined) class of orderings for recoding operations. The correspondence then proposes a suboptimal algorithm which utilizes reprocessing ordering and incorporates two techniques that render it computationally very efficient: 1) an iterative reference recoding technique which simplifies the recoding operation required for each test error pattern, and 2) an adaptive skipping rule which significantly reduces the average number of recodings. Simulation results with codes of relatively large length show that the proposed algorithm is computationally very efficient in comparison to existing algorithms in the literature

IEEE Transactions on Information Theory•Jan 23, 2007•62 citations

Reliability-based information set decoding of binary linear codes

M.P.C. Fossorier, Shu Lin

In this paper, soft decision decoding of linear block codes based on the reprocessing of several information sets is considered. These information sets are chosen according to the reliability measures of the received symbols and constructed from the most reliable information set. Each information set is then reprocessed by the ordered statistics algorithm. General guidelines for the trade-offs between the number of information sets to be processed, the number of computations for reprocessing each information set, and the error performance to be achieved are provided.

IEEE International Symposium on Information Theory (ISIT)•Nov 27, 2002•17 citations

An Acceptance Criterion for Hybrid Algebraic and Soft-input Decoding

Malek Safieh, Daniel Nicolas Bailon, Jürgen Freudenberger

In this work, we investigate a hybrid decoding approach that combines algebraic hard-input decoding of binary block codes with soft-input decoding. In particular, an acceptance criterion is proposed which determines the reliability of a candidate codeword. For many received codewords the stopping criterion indicates that the hard-decoding result is sufficiently reliable, and the costly soft-input decoding can be omitted. The proposed acceptance criterion significantly reduces the decoding complexity. For simulations we combine the algebraic hard-input decoding with ordered statistics decoding, which enables near maximum likelihood soft-input decoding for codes of small to medium block lengths.

•Feb 1, 2020•8 citations

Limited-trial chase decoding

G. Arico, Jos H. Weber

Chase decoders permit flexible use of reliability information in algebraic decoding algorithms for error-correcting block codes of Hamming distance d. The least complex version of the original Chase algorithms uses roughly d/2 trials of a conventional binary decoder, after which the best decoding result is selected as the final output. On certain channels, this approach achieves asymptotically the same performance as maximum-likelihood (ML) decoding. In this correspondence, the performance of Chase-like decoders with even less trials is studied. Most strikingly, it turns out that asymptotically optimal performance can be achieved by a version which uses only about d/4 trials.

IEEE Transactions on Information Theory•Nov 1, 2003•12 citations
This correspondence presents a hybrid reliability-based decoding algorithm which combines the reprocessing method based on the most reliable basis and a generalized Chase-type algebraic decoder based on the least reliable positions. It is shown that reprocessing with a simple additional algebraic decoding effort achieves significant coding gain. For long codes, the order of reprocessing required to achieve asymptotic optimum error performance is reduced by approximately 1/3. This significantly reduces the computational complexity, especially for long codes. Also, a more efficient criterion for stopping the decoding process is derived based on the knowledge of the algebraic decoding solution.
In this correspondence, various aspects of reliability-based syndrome decoding of binary codes are investigated. First, it is shown that the least reliable basis (LRB) and the most reliable basis (MRB) are dual of each other. By exploiting this duality, an algorithm performing maximum-likelihood (ML) soft-decision syndrome decoding based on the LRB is presented. Contrarily to previous LRB-based ML syndrome decoding algorithms, this algorithm is more conveniently implementable for codes whose codimension is not small. New sufficient conditions for optimality are derived. These conditions exploit both the ordering associated with the LRB and the structure of the code considered. With respect to MRR-based sufficient conditions, they present the advantage of requiring no soft information and thus can be preprocessed and stored. Based on these conditions, low-complexity soft-decision syndrome decoding algorithms for particular classes of codes are proposed. Finally, a simple algorithm is analyzed. After the construction of the LRB, this algorithm computes the syndrome of smallest Hamming weight among o(K/sup i/) candidates, where K is the dimension of the code, for an order i of reprocessing. At practical bit-error rates, for codes of length N/spl les/128, this algorithm always outperforms any algebraic decoding algorithm capable of correcting up to t+1 errors with an order of reprocessing of at most 2, where t is the error-correcting capability of the code considered.
This dissertation presents a novel approach to soft decision decoding for binary linear block codes. The basic idea of this approach is to achieve a desired error performance progressively in a number of stages. For each decoding stage, the error performance is highly bounded and the decoding is terminated at the stage where either near-optimum error performance or a desired level of error performance is achieved. As a result, more flexibility in the trade-off between performance and decoding complexity is provided. The proposed decoding is based on the reordering of the received symbols according to their reliability measure. In the dissertation, we evaluate the statistics of the noise after ordering. Based on these statistics, we derive two monotonic properties which dictate the reprocessing strategy. Each codeword is decoded in two steps: (1) hard-decision decoding based on reliability information and (2) reprocessing of the hard-decision decoded codeword in successive stages until the desired performance is achieved. The reprocessing is based on the monotonic properties of the ordering and is carried out using a cost function. A new resource test highly related to the reprocessing strategy is introduced to reduce the number of computations for each reprocessing stage. For short codes of lengths N ≤ 32 or medium codes with 32 < N ≤ 64 with rate R ≥ 0.6, near-optimum bit error performance is achieved in two stages of reprocessing with at most a computation complexity of o(K2) constructed code-words, where K is the dimension of the code. For longer codes, three or more reprocessing stages are required to achieve near-optimum decoding. However, most of the coding gain is obtained within the first two reprocessing stages for error performances of practical interest. The proposed decoding algorithm applies to any binary linear code, does not require any data storage and is well suitable for parallel processing. Furthermore, the maximum number of computations required at each reprocessing stage is fixed, which prevents buffer overflow at low SNR. Further reductions of the number of computations based on probabilistic or decomposable properties of the code considered are also investigated. The generalization of the algorithm to other channels is discussed. Finally, the discrete time channel associated with the AWGN model after ordering is greatly simplified. This simplification allows an important reduction of the number of computations required to evaluate the theoretical error performance of any algorithm based on a partial or total ordering.
This correspondence investigates soft-decision decoding of binary linear block codes using ordered recodings of test error patterns on the so-called "most reliable basis." The analysis demonstrates the optimality of the most reliable basis by showing that, among all possible bases, the most reliable basis minimizes the list error probability for a very general (and well-defined) class of orderings for recoding operations. The correspondence then proposes a suboptimal algorithm which utilizes reprocessing ordering and incorporates two techniques that render it computationally very efficient: 1) an iterative reference recoding technique which simplifies the recoding operation required for each test error pattern, and 2) an adaptive skipping rule which significantly reduces the average number of recodings. Simulation results with codes of relatively large length show that the proposed algorithm is computationally very efficient in comparison to existing algorithms in the literature
In this paper, soft decision decoding of linear block codes based on the reprocessing of several information sets is considered. These information sets are chosen according to the reliability measures of the received symbols and constructed from the most reliable information set. Each information set is then reprocessed by the ordered statistics algorithm. General guidelines for the trade-offs between the number of information sets to be processed, the number of computations for reprocessing each information set, and the error performance to be achieved are provided.
In this work, we investigate a hybrid decoding approach that combines algebraic hard-input decoding of binary block codes with soft-input decoding. In particular, an acceptance criterion is proposed which determines the reliability of a candidate codeword. For many received codewords the stopping criterion indicates that the hard-decoding result is sufficiently reliable, and the costly soft-input decoding can be omitted. The proposed acceptance criterion significantly reduces the decoding complexity. For simulations we combine the algebraic hard-input decoding with ordered statistics decoding, which enables near maximum likelihood soft-input decoding for codes of small to medium block lengths.
Chase decoders permit flexible use of reliability information in algebraic decoding algorithms for error-correcting block codes of Hamming distance d. The least complex version of the original Chase algorithms uses roughly d/2 trials of a conventional binary decoder, after which the best decoding result is selected as the final output. On certain channels, this approach achieves asymptotically the same performance as maximum-likelihood (ML) decoding. In this correspondence, the performance of Chase-like decoders with even less trials is studied. Most strikingly, it turns out that asymptotically optimal performance can be achieved by a version which uses only about d/4 trials.