Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

URSI General Assembly and Scientific Symposium

Optical frequency metrology with ytterbium and strontium optical lattice clocks

Feng-Lei Hong, Masami Yasuda, Takuya Kohno, Kazumoto Hosaka, Daisuke Akamatsu, Hajime Inaba, Yoshiaki Nakajima, Kana Iwakuni, Atsushi Onae

Published Aug 1, 2011• 0 citations
Publisher

Abstract

We report on the development of an ytterbium (171Yb) and a strontium (87Sr) optical lattice clock at the National Metrology Institute of Japan (NMIJ). The result of absolute frequency measurement of the171Yb lattice clock is shown. We also report on narrow-linewidth fiber-based frequency combs that are used not only to measure the absolute frequency of the optical lattice clocks but also to servo control the frequency of the lasers for cooling and trapping Yb and Sr atoms.

DOI
10.1109/ursigass.2011.6050323

Related papers

Optical frequency metrology with optical lattice clocks and optical frequency combs

Feng-Lei Hong, Masami Yasuda, Daisuke Akamatsu +5 more

Laser frequency stabilization and atom manipulation are important techniques for optical frequency metrology. We report on the development of an ytterbium (171Yb) and a strontium (87Sr) optical lattice clock at the National Metrology Institute of Japan (NMIJ). The result of absolute frequency measurement of the171Yb lattice clock is shown. We also report on narrow-linewidth fiber-based frequency combs that are used not only to measure the absolute frequency of the optical lattice clocks but also to servo control the frequency of the lasers for cooling and trapping Yb and Sr atoms.

Conference on Precision Electromagnetic Measurements•Jul 1, 2012•1 citation

Current status of the171Yb optical lattice clock at NMIJ, AIST

Masami Yasuda, Takuya Kohno, Kazumoto Hosaka +4 more

We report the current status of our ytterbium optical lattice clock at the NMIJ, AIST. After the first measurement of the clock transition frequency and the estimation of the uncertainty, we have been improving our clock. For an increased signal to noise ratio of the observed spectrum, we employed an atom number normalization scheme. We stabilized the frequency of the lattice laser using a fiber-based optical frequency comb. We also stabilized the intensity of the lattice laser.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 8, 2011•0 citations

Dual-Mode Operation of an Optical Lattice Clock Using Strontium and Ytterbium Atoms

Daisuke Akamatsu, Takumi Kobayashi, Yusuke Hisai +4 more

We have developed an optical lattice clock that can operate in dual modes: a strontium (Sr) clock mode and an ytterbium (Yb) clock mode. Dual-mode operation of the Sr-Yb optical lattice clock is achieved by alternately cooling and trapping87Sr and171Yb atoms inside the vacuum chamber of the clock. Optical lattices for Sr and Yb atoms were arranged with horizontal and vertical configurations, respectively, resulting in a small distance of the order of 100 μm between the trapped Sr and Yb atoms. The1S0-3P0clock transitions in the trapped atoms were interrogated in turn and the clock lasers were stabilized to the transitions. We demonstrated the frequency ratio measurement of the Sr and Yb clock transitions by using the dual-mode operation of the Sr-Yb optical lattice clock. The dual-mode operation can reduce the uncertainty of the blackbody radiation shift in the frequency ratio measurement, because both Sr and Yb atoms share the same blackbody radiation.

arXiv:1806.02260•IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control•Mar 26, 2018•18 citations

Magic Wavelength Measurement of the 87 Sr Optical Lattice Clock at NIM

Qiang Wang, Yige Lin, Fei Meng +5 more

We report on the magic wavelength measurement of our optical lattice clock based on fermion strontium atoms at the National Institute of Metrology (NIM). A Ti:sapphire solid state laser locked to a reference cavity inside a temperature-stabilized vacuum chamber is employed to generate the optical lattice. The laser frequency is measured by an erbium fiber frequency comb. The trap depth is modulated by varying the lattice laser power via an acousto-optic modulator. We obtain the frequency shift coefficient at this lattice wavelength by measuring the differential frequency shift of the clock transition of the strontium atoms at different trap depths, and the frequency shift coefficient at this lattice wavelength is obtained. We measure the frequency shift coefficients at different lattice frequencies around the magic wavelength and linearly fit the measurement data, and the magic wavelength is calculated to be 368554672(44) MHz.

Chinese Physics Letters•Oct 1, 2016•9 citations

Yb Optical Lattice Clock at NMIJ, AIST

Masami Yasuda, Takuya Kohno, Kazumoto Hosaka +3 more

We have developed a one-dimensional optical lattice clock using a fermionic isotope of ytterbium (171Yb). The absolute frequency of the 1S0 − 3P0 clock transition in 171Yb is determined with respect to the SI second.

Conference on Lasers and Electro-Optics•Jan 1, 2010•0 citations

Frequency comparisons of Sr, Yb, and Hg based optical lattice clocks and their applications

Hidetoshi Katori, Ichiro Ushijima, Manoj Das +8 more

We report recent progress of optical lattice clocks with strontium, ytterbium and mercury atoms with an emphasis on their synchronous frequency comparison inside a laboratory and inter-laboratories connected by a phase-stabilized fiber link.

Conference on Lasers and Electro-Optics•Jan 1, 2015•1 citation
We report on the development of an ytterbium (171Yb) and a strontium (87Sr) optical lattice clock at the National Metrology Institute of Japan (NMIJ). The result of absolute frequency measurement of the171Yb lattice clock is shown. We also report on narrow-linewidth fiber-based frequency combs that are used not only to measure the absolute frequency of the optical lattice clocks but also to servo control the frequency of the lasers for cooling and trapping Yb and Sr atoms.
Laser frequency stabilization and atom manipulation are important techniques for optical frequency metrology. We report on the development of an ytterbium (171Yb) and a strontium (87Sr) optical lattice clock at the National Metrology Institute of Japan (NMIJ). The result of absolute frequency measurement of the171Yb lattice clock is shown. We also report on narrow-linewidth fiber-based frequency combs that are used not only to measure the absolute frequency of the optical lattice clocks but also to servo control the frequency of the lasers for cooling and trapping Yb and Sr atoms.
We have developed an optical lattice clock that can operate in dual modes: a strontium (Sr) clock mode and an ytterbium (Yb) clock mode. Dual-mode operation of the Sr-Yb optical lattice clock is achieved by alternately cooling and trapping87Sr and171Yb atoms inside the vacuum chamber of the clock. Optical lattices for Sr and Yb atoms were arranged with horizontal and vertical configurations, respectively, resulting in a small distance of the order of 100 μm between the trapped Sr and Yb atoms. The1S0-3P0clock transitions in the trapped atoms were interrogated in turn and the clock lasers were stabilized to the transitions. We demonstrated the frequency ratio measurement of the Sr and Yb clock transitions by using the dual-mode operation of the Sr-Yb optical lattice clock. The dual-mode operation can reduce the uncertainty of the blackbody radiation shift in the frequency ratio measurement, because both Sr and Yb atoms share the same blackbody radiation.
We report on the magic wavelength measurement of our optical lattice clock based on fermion strontium atoms at the National Institute of Metrology (NIM). A Ti:sapphire solid state laser locked to a reference cavity inside a temperature-stabilized vacuum chamber is employed to generate the optical lattice. The laser frequency is measured by an erbium fiber frequency comb. The trap depth is modulated by varying the lattice laser power via an acousto-optic modulator. We obtain the frequency shift coefficient at this lattice wavelength by measuring the differential frequency shift of the clock transition of the strontium atoms at different trap depths, and the frequency shift coefficient at this lattice wavelength is obtained. We measure the frequency shift coefficients at different lattice frequencies around the magic wavelength and linearly fit the measurement data, and the magic wavelength is calculated to be 368554672(44) MHz.